Analytische Chemie
Filtern
Dokumenttyp
- Vortrag (15) (entfernen)
Referierte Publikation
- nein (15)
Schlagworte
- Upconversion (15) (entfernen)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (15)
The presentation gave an overview of the topic, the aims and the task allocation of the M-ERA.NET founded project named “Nanohype”.
In this project four research teams working hand in hand on computational modeling, synthesis and experimental validation to design novel metal-shelled Upconversion-NP combining plasmonic interactions.
As Ph.D. student at the BAM I am responsible for the optical characterization (measurements of lifetimes, Quantum Yields and PL emissions ) of these promising novel systems.
Hexagonal beta-NaYF₄ doped with 20 % Yb and 2 % Er is an efficient upconversion (UC) phosphor for the conversion of 976 nm to 845 nm, 655 nm and 540 nm light. The emission behavior of this material is strongly influenced by the particle size, surface chemistry, and microenvironment. Especially the design of nm-sized UC particles for bioanalytical applications requires reliable spectroscopic tools for the characterization of the optical properties of these materials like the UC quantum yield (QYUC) in aqueous media. The UC emission originates from multiphotonic absorption processes, rendering the QYUC excitation power density (P) dependent. The P-dependent absolute measurement of QYUC in aqueous media with an excitation wavelength of 976 nm presents a considerable challenge due to the low absorption coefficients of the UC materials and the absorption of water at this wavelength.
Here, we present the P-dependent QYUC of 21 nm, 26 nm and 31 nm-sized NaYF₄ UC particles dispersed in cyclohexane and aqueous solutions, in view of bioanalytical applications. To gain a better insight of the photonic nature of the upconversion mechanism and the quenching processes involved, the luminescence decay behavior as well as the P-dependent red-to-green luminescence intensity ratios and slope factors of the different emission bands are studied in both solvents. These results present an important step to the rational design of brighter upconversion nanoparticles.
There is an increasing interest in optical reporters like semiconductor and lanthanide-based nanocrystals with emission > 800 nm and recently also > 1000 nm for bioanalysis, medical diagnostics, and safety barcodes. Mandatory for the comparison of different emitter classes and the rational design of the next generation of reporters for the short wavelength infrared (SWIR) region are reliable and quantitative photoluminescence measurements in this challenging wavelength region. This is of special relevance for nanocrystalline emitters like semiconductor quantum dots and rods as well as for upconversion and downconversion nanocrystals, where surface states and the accessibility of emissive states by quenchers largely control accomplishable quantum yields and hence, signal sizes and detection sensitivities from the reporter side. Such measurements are currently hampered by the lack of suitable methods and standards for instrument calibration and validation as well as by the lack of quantum yield standards with emission > 800 nm and especially > 1000 nm.
In this respect, we present the design of integrating sphere setups for absolute and excitation power densitydependent measurements of emission spectra and quantum yields in the wavelength region of 650 to 1650 nm
including calibration strategies and first candidates for potential fluorescence standards. Subsequently, the photoluminescence properties of different types of nanocrystals are presented and discussed including absolute photoluminescence measurements of upconversion and down conversion emission in different solvents.
There is an increasing interest in molecular and nanoscale with emission > 800 nm and recently also > 1000 nm for bioanalysis, medical diagnostics, bioimaging, and safety barcodes. Mandatory for the comparison of different emitter classes and the rational design of the next generation of reporters for the short wavelength infrared (SWIR) Region are reliable and quantitative photoluminescence measurements in this challenging wavelength region. This is of special relevance for nanocrystalline emitters like semiconductor quantum dots and rods as well as lanthanide-based upconversion and downconversion nanocrystals, where surface states and the accessibility of emissive states by quenchers largely control accomplishable photoluminescence quantum yields and hence, signal sizes and detection sensitivities from the reporter side. Such measurements are currently hampered by the lack of suitable methods and standards for instrument calibration and validation and quantum yield standards with emission > 800 nm and especially > 1000 nm.
In this respect, we present the design of integrating sphere setups for absolute and excitation power density-dependent measurements of emission spectra and photoluminescence quantum yields in the wavelength Region of 650 to 1650 nm including calibration strategies and first candidates for potential fluorescence standards.
Subsequently, the photoluminescence properties of different types of nanocrystals are presented including the upconversion and downconversion emission of differently sized and surface functionalized lanthanide-doped nanoparticles and photoluminescence quenching effects are quantified.
Upconversion nanoparticles (UCNPs) offer new strategies for luminescence-based sensing and imaging. One of the best studied materials are ..-NaYF4 UCNPs doped with 20 % Yb3+ and 2 % Er3+, which efficiently convert 976 nm light to photons emitted at 540 nm, 655 nm, and 845 nm, respectively, reveal long luminescence lifetimes (> 100 µs), are photostable and chemically inert. Their upconversion (UC) luminescence (UCL) properties are, however, strongly influenced by particle size, surface chemistry, and microenvironment. In addition, the multiphotonic absorption processes responsible for UCL render UCL excitation power density (..) dependent. This makes quantitative UCL measurements as well as the determination of UC quantum yields (.UC) very challenging.
The rational design of brighter UCNPs particle architectures and the interest in identifying optimum particle architectures for FRET-based sensing and imaging schemes, which often rely on core-only UCNPs to minimize donor-acceptor distances, encouraged us to assess the influence of particle size and P on UCL. Here, we present the photophysical properties of a series of hexagonal NaYF4 UCNPs with sizes from 10 to 43 nm with different surface ligands dispersed in organic solvents and water studied by steady state and time-resolved fluorometry as well as quantitatively by integrating sphere spectrometry with P varied over about three orders of magnitude. Our results underline the need for really quantitative luminescence studies for mechanistic insights and the potential of high P to compensate for UCL quenching due to high energy phonons and surface effects.
Upconversion nanoparticles (UCNPs) offer new strategies for luminescence-based sensing. The potential of UCNPs to serve as donors in Förster resonance energy transfer (FRET) applications is intensely discussed, owing to their anti-Stokes shifted narrow emission bands, chemical inertness, photostability, and long luminescence lifetimes (> 100 μs). Since FRET is distance dependent, the diameter of the particles is expected to affect the FRET efficiency. In order to identify the ideal particle architecture for FRET-based applications, we performed a systematic spectroscopic study of the influence of the UCNP size on the energy transfer using the organic dyes rose bengal and sulforhodamine B acting as model FRET acceptors for the green upconversion emission. High-quality Yb,Er-doped UCNPs with precisely controlled diameters between 10 and 43 nm were prepared using a high temperature synthesis. The monodisperse, oleate-capped particles were directly modified with the organic dyes by a two-step ligand exchange procedure, resulting in the shortest possible donor-acceptor distance. Successful FRET was demonstrated through the simultaneous drastic reduction of the luminescence intensity and the lifetime of the respective upconversion emission. In contrast to intensity measurements, time-resolved studies on both donor and acceptor luminescence allowed for the elimination of dependencies on excitation power density and particle concentration and for the discrimination between inner filter effects and FRET. The maximum FRET efficiency was observed at a particle diameter around 21 nm, which was attributed to an increasing fraction of the total amount of Er3+ donors inside the UCNPs being within Förster distance. Smaller UCNP diameters did not further improve the FRET efficiency, demonstrating the growing contribution of opposing effects, like the competition of non-radiative surface deactivation, at larger surface-to-volume ratios. This comprehensive understanding of energy transfer processes at the surface of UCNPs is essential for the rational design of upconversion FRET platforms for applications in sensing, imaging, and theranostics with improved sensitivity, reliability and comparability. The energy transfer can also be utilized to shift the luminescence emission by the choice of the organic dye in order to explore applications that require specific emission wavelengths due to interfering substances, while still making use of the advantages of near-infrared excitation.
The rational design of functional nanomaterials for optical applications in the material and life sciences requires optical-spectroscopic methods for the quantitative characterization of their signal-relevant optical properties. Additionally, methods for the simple and quantitative analysis of the surface chemistry are desired as the chemical nature and number of the surface groups and ligands can affect the optical features and controls the interaction of these nanomaterials with their environment. Here, we present quantitative photoluminescenvce studies of different types of vis/NIR-emissive nanomaterials like semiconductor quantum dots and upconversion nanocrystals will be presented and their relevance for the mechanistic understanding of nonradiative decay channels and the rational design of new nanomaterials will be underpinned. In this respect, also validation concepts for such measurements and absolute fluorometry will be introduced. In addition, the potential of optical spectroscopy for surface group and ligand analysis surface chemistry will be demonstrated exemplarily for semiconductor quantum dots
Lanthanide-doped photon-upconversion nanoparticles (UCNPs) have been in the focus of many research activities in the material and life sciences over the last 15 years because of their potential to convert light between different spectral regions and their unique photophysical properties. In order to fully exploit the application potential of these fascinating nanomaterials, a number of challenges has to be overcome such as the low brightness particularly of small UCNPs and the reliable quantification of the excitation power density (P)-dependent upconversion luminescence (UCL). Here, the need and requirements on the characterization of the optical properties of UCNPs are discussed with special focus on the reliabiliy and comparability of relative and quantitative luminescence measurements and prerequisites for their standardization.
Functional Nanomaterials with VIS/NIR Emission-Spectroscopic Properties And Surface Group Analysis
(2017)
Optical-spectroscopic methods for the quantitative characterization of the optical properties of different types of vis/NIR-emissive nanomaterials like semiconductor quantum dots and upconversion nanocrystals will be presented and their relevance for the mechanistic understanding of nonradiative decay channels and the rational design of new nanomaterials will be underpinned. In this respect, also validation concepts for such measurements and absolute fluorometry will be introduced. In addition, the potential of optical spectroscopy for surface group and ligand analysis surface chemistry will be demonstrated exemplarily for semiconductor quantum dots.
At the core of luminescence color and lifetime tuning of rare earth doped upconverting nanoparticles (UCNPs) is the understanding of the impact of the particle architecture for commonly used sensitizer (S) and activator (A) ions. In this respect, we present here a series of core@shell NaYF4 UCNPs doped with Yb3+ and Ho3+ ions, where the same dopant concentrations were distributed in different particle architectures following the scheme: YbHo core and YbHo@..., …@YbHo, Yb@Ho, Ho@Yb, YbHo@Yb, and Yb@YbHo core-shell NPs. As revealed by quantitative steady state and time-resolved luminescence studies, the relative spatial distribution of the A and S ions in the UCNPs and their protection from surface quenching has critical impact on their luminescent characteristics. Interestingly, although the increased amount of Yb3+ ions boosts UCNP performance by increasing the absorption, the Yb3+ ions can also dissipate the energy stored in the material through energy migration to surface, thereby reducing the overall energy transfer efficiency to the activator ions.