Wissenschaftliche Artikel der BAM
Filtern
Dokumenttyp
- Zeitschriftenartikel (196) (entfernen)
Sprache
- Englisch (190)
- Deutsch (5)
- Portugiesisch (1)
Schlagworte
- Concrete (15)
- Corrosion (14)
- Alkali-activated materials (13)
- Flame retardant (9)
- Cement (6)
- Durability (5)
- Flame retardancy (5)
- Additive manufacturing (4)
- Carbon steel (4)
- Cone calorimeter (4)
- Fatigue (4)
- Mechanical properties (4)
- Phosphorus (4)
- Rheology (4)
- Rubber (4)
- Structural health monitoring (4)
- Acid resistance (3)
- Compressive strength (3)
- Corrosion testing (3)
- DFG SPP 2005 (3)
- Environmental stress cracking (ESC) (3)
- Fire protection (3)
- Fire resistance (3)
- Fire test (3)
- Full notch creep test (FNCT) (3)
- Graphene (3)
- Ground vibration (3)
- High-density polyethylene (3)
- Hyperbranched (3)
- Impurities (3)
- Lithium-ion battery (3)
- Model updating (3)
- Proper generalized decomposition (3)
- Spalling (3)
- Thermal runaway (3)
- Value of information (3)
- Accelerated testing (2)
- Alkali silica reaction (2)
- Aluminium (2)
- Aluminum diethylphosphinate (2)
- Aluminum hydroxide (ATH) (2)
- Baustoffrecycling (2)
- Bridge (2)
- Building and Construction (2)
- Bus interior materials (2)
- CCUS (2)
- Calcined clay (2)
- Carbon fibers (2)
- Carbonation (2)
- Cement matrix (2)
- Characterization (2)
- Civil and Structural Engineering (2)
- Corrosion resistance (2)
- Crop protection products (2)
- Depletion force (2)
- Dripping (2)
- EPDM (2)
- Electrochemical methods (2)
- Environmental stress cracking (2)
- Evaporite rock (2)
- Expandable graphite (2)
- Explicit dynamics (2)
- FTIR (2)
- Fire behaviour (2)
- Fire statistics (2)
- Flame retardants (2)
- Flammability (2)
- Gel electrolytes (2)
- Geothermal (2)
- High-performance concrete (2)
- Human behaviour (2)
- Impact simulation (2)
- Intumescent coating (2)
- Isogeometric analysis (2)
- Laser scanning microscopy (LSM) (2)
- Layered double hydroxide (2)
- Layered soil (2)
- Leichte Gesteinskörnungen (2)
- Luminescence (2)
- MIC (2)
- Mauerwerkbruch (2)
- Microstructure (2)
- Moisture transport (2)
- Monitoring (2)
- Nanocomposite (2)
- Nanocomposites (2)
- PFEM (2)
- Polymers of Intrinsic Microporosity (2)
- Polyurethane (2)
- Portland cement (2)
- Random field (2)
- Rapid mass calorimeter (2)
- Reliability (2)
- Rice husk ash (2)
- SHM (2)
- Smoke gas emission (2)
- Sr isotopes (2)
- Structural Health Monitoring (2)
- Structural sealant glazing (2)
- Synergy (2)
- Synthesis (2)
- System identification (2)
- Thermal treatment (2)
- Thermoplastic polyurethane (2)
- Train-induced ground vibration (2)
- UL 94 (2)
- Verkehrsinfrastukturen (2)
- Weathering (2)
- 3-dimensional microscopy (1)
- 3DCP (1)
- 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide; DOPO (1)
- AFm phase (1)
- ASR modelling (1)
- ASR-Sensitive Aggregate (1)
- Accelerated carbonation (1)
- Accelerated concrete prism test (1)
- Acceleration sensors (1)
- Acetylation (1)
- Acid attack (1)
- Acoustic emission (1)
- Acoustic emission monitoring (1)
- Adaptive importance sampling (1)
- Adhesively bonded joints (1)
- Adhesives (1)
- Agar (1)
- Ageing (1)
- Aging (1)
- Agricultural by-product (1)
- Al/SiO2 composite (1)
- Al2O3 (1)
- Alkali aggregate reaction (1)
- Alkali-Silica Reaction (ASR) (1)
- Alkali-activated slag (1)
- Alkali–silica reaction (1)
- Aluminium hydroxide (1)
- Aluminum trihydroxide (ATH) (1)
- Analytical methods (1)
- Angle of repose (1)
- Anode (1)
- Aquifer fluid (1)
- Architecture (1)
- Aromatic (1)
- Artificial ageing (1)
- Asymptotic local approach (1)
- Atmospheric corrosion (1)
- Atmospheric exposure (1)
- Atmosphärische Korrosion (1)
- Attenuation (1)
- Austenitic stainless steel (1)
- Automated Modal Analysis for Tracking Structural Change during Construction and Operation Phases (1)
- Automated expansion measurement (1)
- Automated operational modal analysis (1)
- Axle sequence (1)
- Bacterial attachment (1)
- Bauwerksüberwachung (1)
- Bayesian Inference (1)
- Bayesian updating of stress ranges (1)
- Behmite (1)
- Belastungstest (1)
- Bench-scale fire resistance (1)
- Bending (1)
- Beton (1)
- Binary zinc alloys (1)
- Bingham fluid (1)
- Bio-based concrete (1)
- Biocomposites (1)
- Biodegradable (1)
- Biodiesel (1)
- Biofilm (1)
- Biomaterials (1)
- Bioreceptivity (1)
- Bis([dimethoxyphosphoryl]methyl) phenyl phosphate (1)
- Bituminous binders (1)
- Blade (1)
- Blended cement (1)
- Boehmite (1)
- Boson peak (1)
- Boundary element (1)
- Brick clay (1)
- Bridge Monitoring (1)
- Bridge resonance (1)
- Brittle epoxy (1)
- Building response (1)
- Building with earth (1)
- Burning behavior (1)
- Burning behaviour (1)
- CCS (1)
- CO2 (1)
- CO2 pipeline transport (1)
- CO2 quality (1)
- Cables (1)
- Calorimetry (1)
- Carbon (1)
- Carbon black (1)
- Carbon capture storage (1)
- Carbon capture, utilization and storage technology (1)
- Carbon dioxide (1)
- Carbon dioxide emissions (1)
- Carbon fibre reinforced (1)
- Carbon fibre reinforced polymer (1)
- Carbonation behaviour (1)
- Casing (1)
- Cathode active material (1)
- Cement hydration (1)
- Cement paste (1)
- Cement suspension (1)
- Ceramics (1)
- Charge density (1)
- Charring (1)
- Chemical admixtures (1)
- Chemical synthesis (1)
- Chemisorption (1)
- Chloride (1)
- Chloride binding (1)
- Chloride penetration (1)
- Chloride‐induced corrosion (1)
- Circular economy (1)
- Coating (1)
- Combined finite-element boundary-element method (1)
- Components of excitation (1)
- Composite material (1)
- Composites (1)
- Composites in fire (1)
- Compressed earth (1)
- Compression tests (1)
- Concrete 3D-printing (1)
- Concrete Carbonation (1)
- Concrete beam (1)
- Concrete printing (1)
- Concrete repair (1)
- Condensate (1)
- Condensed Matter Physics (1)
- Condensed matter physics (1)
- Cone claorimeter (1)
- Confocal laser scanning microscopy (LSM) (1)
- Consequences (1)
- Construction and demolition waste (1)
- Corrosion costs (1)
- Corrosion protection (1)
- Corrosion rate (1)
- Corrosivity category (1)
- Covalent Organic frameworks (1)
- Crack (1)
- Crack Detection (1)
- Crack damage detection (1)
- Crack opening displacement (1)
- Crack propagation (1)
- Cracks (1)
- Craze-crack mechanism (1)
- Craze–crack mechanism (1)
- Critical chloride content (1)
- Crosslinking (1)
- Crystalline admixture (1)
- Crystalline phase identification (1)
- Cyclic weathering (1)
- DGEBA (1)
- DIN tube furnace (1)
- DMDHEU (1)
- DOPO (1)
- Damage Identification (1)
- Damage Quantification (1)
- Damage analysis (1)
- Damage detection (1)
- Damage detection systems (1)
- Damage evolution (1)
- Data infrastructures (1)
- Datenfusion (1)
- Debonding Mechanism (1)
- Decarbonisation (1)
- Decision analysis (1)
- Decision theory (1)
- Decision tree (1)
- Decomposition mechanism (1)
- Degradation (1)
- Dehydration (1)
- Demolition wastes (1)
- Dendritic (1)
- Denkmalpflege (1)
- Design of experiment (1)
- Destructive testing (1)
- Detection (1)
- Deteriorating structures (1)
- Developing building materials (1)
- Dibenzo[d,f][1,3,2]dioxaphosphepine 6-oxide (1)
- Dibenzo[d,f][1,3,2]dioxaphosphepine 6-oxide; BPPO (1)
- Diesel (1)
- Digital Twins (1)
- Digital image correlation (1)
- Digital representations (1)
- Digital twin (1)
- Digital workflows (1)
- Dissolution (1)
- Distributed fiber optic sensing (1)
- Distributed fibre optic sensor (1)
- Domain decomposition methods (1)
- Drawing layers (1)
- Drehrohrofen (1)
- Ductile PUR (1)
- Durability assessment (1)
- Dynamic Bayesian Network (1)
- Dynamic axle loads (1)
- Dynamic excitation (1)
- Dynamic loads (1)
- EPR (1)
- EVA (1)
- Earth block masonry (1)
- Earth material (1)
- Egress (1)
- Elastomers (1)
- Electrochemical cells (1)
- Electrochemical characterisation (1)
- Electrochemical impedance spectroscopy (1)
- Elevated temperature (1)
- Engineering data (1)
- Engineering egress data (1)
- Environmental Chemistry (1)
- Environmental and Operational Variability (1)
- Environmental influence (1)
- Epoxies (1)
- Erosion (1)
- Estimation (1)
- Ethylene-vinyl acetate (1)
- European project (1)
- Evacuation (1)
- Excitation forces (1)
- Explosion limit (1)
- FAIR (1)
- FTIR spectroscopy (1)
- FTIR-ATR (1)
- FTIR-ATR Measurements (1)
- Facade (1)
- Fatigue damage (1)
- Fatigue strength (1)
- Fiber optic sensor (1)
- Fibre bragg grating (1)
- Filter effects (1)
- Finite element (1)
- Finite element analysis (1)
- Finite element method (1)
- Finite elements (1)
- Fire (1)
- Fire retardant interlayers (1)
- Fire safety (1)
- Fire spalling (1)
- Fire stability (1)
- Fire tests (1)
- Flame Retardancy (1)
- Flame retardance (1)
- Flame retardant pressure sensitive adhesives (1)
- Flame retardant; (1)
- Flexible PU foam (1)
- Flexible car body (1)
- Flexible polyurethane foam (1)
- Flexible wheelset (1)
- Flow properties (1)
- Flowability (1)
- Flue gas desulfurization gypsum (1)
- Foam (1)
- Foams (1)
- Fracture surface analysis (1)
- Fracture surfaces (1)
- Fracture toughness (1)
- Free polymer (1)
- Freeze-thaw attack (1)
- Frost salt attack (1)
- Fuel sorption (1)
- Full notch creep test (1)
- Furniture (1)
- Future‑oriented standards (1)
- GPU Parallel computing (1)
- Gas analysis (1)
- Gas emission (1)
- Gas explosion (1)
- Gel-bound Colorants (1)
- General Materials Science (1)
- Geometric vehicle and track irregularities (1)
- Geopolymers (1)
- Gips (1)
- Glass fiber-reinforced composites (1)
- Glass-fiber-reinforced plastic transport tank (1)
- Global ambient vibrations (1)
- Goal-oriented (1)
- Green facades (1)
- Green urban construction (1)
- Grinding (1)
- Halogen-free (1)
- Hammer impact (1)
- Hardly separable problem (1)
- Hausner ratio (1)
- Heat of combustion (1)
- Heat release (1)
- Heat transfer (1)
- Heat treatment (1)
- Heavy metal removal (1)
- Heterogeneity (1)
- High density polyethylene (1)
- High heat resistance (1)
- High throughput screening (1)
- High-rise building (1)
- High‐nitrogen steel (1)
- Horizontal wind turbine (1)
- Hot storage (1)
- Hybrid alkaline cement (1)
- Hybrid cements (1)
- Hydration (1)
- Hydration stoppage (1)
- Hydrogarnet (1)
- Hydrogen (1)
- Hydrogen‐induced stress corrosion cracking (1)
- Hydrothermal treatment (1)
- Hydroxylellestadite (1)
- IEPE (1)
- ISO 9223 (1)
- Icing conditions (1)
- Identification and quantification of additives (1)
- Ignition (1)
- Illite (1)
- In-situ ED-XRD (1)
- In-situ testing (1)
- Inclination angle (1)
- Indoor condition (1)
- Industrial by-products (1)
- Infra-lightweight concrete (1)
- Infraleichtbeton (1)
- Interlaboratory test (1)
- Intumescent additives (1)
- Ionic stregth (1)
- Kaolinite (1)
- Knowledge graphs (1)
- Korrosion (1)
- LBM-DEM (1)
- LIBS (1)
- Laminate design (1)
- Laminates (1)
- Large components (1)
- Large-scale tests (1)
- Laser-induced slip casting (1)
- Lateral dynamic displacement (1)
- Leather (1)
- Leather waste (1)
- Leichtgranulate (1)
- LiFePO4 (1)
- Lightweight aggregates (1)
- Limestone powder (1)
- Linear elastic fracture mechanics (1)
- Lithium (1)
- Lithium aluminosilicates (1)
- Load identification (1)
- Load tests (1)
- Local approaches (1)
- Localized model order reduction (1)
- Long-term study (1)
- Low-carbon construction (1)
- Low-frequency shaker (1)
- Lunar regolith (1)
- MCC (1)
- Magnesium chloride brine (1)
- Magnesium hydroxide (1)
- Mapping for unseparable load (1)
- Martensitic steels (1)
- Maschinelles Lernen (1)
- Maschinenfundament (1)
- Mass loss (1)
- Mass spectrometry (1)
- Material moisture (1)
- Materials (1)
- Materials Chemistry (1)
- Materials informatics (1)
- Measurement campaigns (1)
- Mechanical Engineering (1)
- Mechanical load (1)
- Mechanical loading (1)
- Mechanical strength (1)
- Mechanics of Materials (1)
- Mechanistic study (1)
- Melamine cyanurate (1)
- Melamine polyphosphate (1)
- Metals and Alloys (1)
- Metathesis (1)
- Methyl group rotation (1)
- Micro-CT scanning (1)
- Microbially induced corrosion (1)
- Micromechanical modelling (1)
- Microplastic (1)
- Microscopy (1)
- Middle Pleistocene (1)
- Mitigation (1)
- Mitigation strategies (1)
- Mix-design (1)
- Model Building (1)
- Model Updating (1)
- Model calibration (1)
- Model order reduction (1)
- Model order reduction (MOR) (1)
- Model reduction (1)
- Model update (1)
- Modell-Update (1)
- Modern (1)
- Modes of action (1)
- Moisture content (1)
- Molecular mass distribution (1)
- Monitoring strategy (1)
- Monopile support structure (1)
- Mortar method (1)
- Movement characteristics (1)
- Multi-beam track model (1)
- Multilayer graphene (1)
- Multiscale methods (1)
- Multivariate evaluation (1)
- Nanoparticles (1)
- Natural rubber (1)
- Nelson’s method (1)
- Network (1)
- Neutron Scattering (1)
- Neutron scattering (1)
- Nitric acid (1)
- Non-destructive testing (1)
- Nondestructive testing (1)
- Nuclear waste repository (1)
- Nuclear waste storage (1)
- Numerische Analysen (1)
- Obstacles (1)
- Offshore geomechanics (1)
- Offshore wind turbine (1)
- Ontologies (1)
- Operational modal analysis (1)
- Optical backscatter reflectometry (1)
- Optical criterion of brittleness (1)
- Organophosphonate (1)
- Orthotropic steel deck (1)
- Outdoor condition (1)
- Oxyfuel (1)
- PCE (1)
- PLA (1)
- PVD hard coating (1)
- Packaging (1)
- Particle-bed binder jetting (1)
- Pedestrian dynamics (1)
- Pedestrians with disabilities (1)
- Permeation measurements (1)
- Phase development (1)
- Phospha-Michael addition (1)
- Phosphine oxide (1)
- Phosphorous flame retardant (1)
- Phosphorus availability (1)
- Phosphorus flame retardant (1)
- Phosphorus flame retardants (1)
- Phosphorus-containing flame retardant (1)
- Phosphorylated Algae (1)
- Phosphorylated lignin (1)
- Physisoprtion (1)
- Pipeline network (1)
- Pitting (1)
- Pitting corrosion (1)
- Poly(butadiene terephthalates) (PBT) (1)
- Polyamide 4.6 (1)
- Polyaniline (1)
- Polybutadiene/chloroprene (1)
- Polyethylene (1)
- Polyisocyanurate (1)
- Polyisocyanurate; PIR (1)
- Polymer Fibres (1)
- Polymer of intrisic microporosity (1)
- Polymers (1)
- Polynorbornene (1)
- Polyolefins (1)
- Polyphosphoester (1)
- Polysaccharides (1)
- Polyurethane foams (1)
- Pore pressure (1)
- Pore structure (1)
- Porosity (1)
- Porous media (1)
- Portland clinker (1)
- Post-fire testing (1)
- Posterior fatigue reliability (1)
- Potassium ions (1)
- Powders (1)
- Prepregs (1)
- Pressure-sensitive adhesive (1)
- Prestressed concrete bridge (1)
- Prestressing steels (1)
- Preventive strategies (1)
- Probability of damage indication (1)
- Probability of detection (1)
- Probability of failure (1)
- Process upscaling (1)
- Proof loading (1)
- Proper Generalized Decomposition (1)
- Proper generalized decomposition (PGD) (1)
- Protective coatings (1)
- Provenance (1)
- Provenancing (1)
- Pudovik reaction (1)
- Pull-Out Behaviour (1)
- Pyrolysis gas chromatography (1)
- Pyrolysis of flame retardant (1)
- Quality (1)
- Quantitative moisture measurement (1)
- Quasielastic Neutron Scattering (1)
- Railway induced vibration (1)
- Raman spectroscopy (1)
- Rammed earth (1)
- Randomly heterogeneous soil (1)
- Rapid gas decompression (1)
- Reactive fire protection system (1)
- Real scale test (1)
- Recommendations (1)
- Recovery (1)
- Recyclable (1)
- Recycled materials (1)
- Recycling (1)
- Reduced order models (1)
- Reference values (1)
- Referenzbeispiel (1)
- Regulation (1)
- Reinforced concrete (1)
- Reinforcement corrosion (1)
- Relative humidity (1)
- Remote sensing vibrometer (1)
- Renewable energy (1)
- Reproducibility (1)
- Resonance (1)
- Restauriermörtel (1)
- Resting time (1)
- Restraint (1)
- Rhenanite (1)
- Rheometry (1)
- Rigid (1)
- Rigid foam (1)
- Rigid vehicle model (1)
- Risk (1)
- Risk assessment (1)
- Road pavement (1)
- Room fire (1)
- Rregulations (1)
- Rubber sealing (1)
- Safety (1)
- Sample piece size (1)
- Scattering (1)
- Schnellladung (1)
- Scientific workflows (1)
- Screening test (1)
- Sealing structures (1)
- Self-healing (1)
- Sensitivity (1)
- Sensitivity analysis (1)
- Sensitivity vectors (1)
- Sift-proofness (1)
- Silica (1)
- Silicone elastomer (1)
- Simulation (1)
- Sintering (1)
- Size effect (1)
- Slag (1)
- Slow crack growth (SCG) (1)
- Smoke (1)
- Smoke suppression (1)
- Smoke toxicity (1)
- Soaking time (1)
- Softening temperature (1)
- Soil (1)
- Soil properties (1)
- Sol-gel (1)
- Solid-state NMR (1)
- Solvent replacement (1)
- Sorption isotherm (1)
- Spectral elements (1)
- Stainless steel (1)
- Static axle loads (1)
- Statistical pattern recognition (1)
- Steel (1)
- Steel construction (1)
- Steel corrosion (1)
- Steel corrrosion (1)
- Steinergänzungsmassen (1)
- Stereophotogrammetry (1)
- Stiffness variation (1)
- Stone Age (1)
- Strain (1)
- Strain measurements of wind turbine support structures (1)
- Stress corrosion cracking (1)
- Stress corrosion tests (1)
- Stress intensity factor (1)
- Stress stiffening (1)
- Stress-strain relation (1)
- Structural health monitoring (SHM) (1)
- Structural reliability (1)
- Structural system identification (1)
- Strukturmonitoring (1)
- Strätlingite (1)
- Sulfate attack (1)
- Sulfide (1)
- Sulfur containing polymers (1)
- Supplementary cementitious material (1)
- Supplementary cementitous materials (1)
- Surface conditions (1)
- Surface interactions (1)
- Surfaces, Coatings and Films (1)
- Sustainability (1)
- Sustainability and the environment (1)
- Sustainable cement (1)
- Sustainable construction (1)
- Swelling (1)
- Synergism (1)
- TED-GC/MS (1)
- TGA-FTIR (1)
- TGA-MS (1)
- Tannery industry (1)
- Tapes (1)
- Temperature effect (1)
- Tension members (1)
- Ternary zinc alloys (1)
- Test setup (1)
- Test solutions (1)
- Testing (1)
- Testing methods (1)
- Testing procedure (1)
- Textile reinforced concrete (1)
- Textile-reinforced concrete (1)
- Thermal Analysis (1)
- Thermal Gravimetric Analysis (1)
- Thermal analysis (1)
- Thermal transient problem (1)
- Thermally treated sludge (1)
- Thermodynamic modelling (1)
- Throwing-stick (1)
- Titanium nitride (1)
- Tobermorite (1)
- Tool comparison (1)
- Toxicity (1)
- Track and vehicle irregularities (1)
- Track damage quantification (1)
- Track filtering (1)
- Train passage (1)
- Train-induced vibration (1)
- Transverse butt weld (1)
- Trench (1)
- Tunnel (1)
- Tunnel-to-surface reduction (1)
- UAS (1)
- UHPC (1)
- UV radiation (1)
- UV-irradiation (1)
- Ultrasonic testing (1)
- Ultrasound gel (1)
- Uncertainty Quantification (1)
- Utility and decision theory (1)
- Value of action analysis (1)
- Variational Bayesian Inference (1)
- Variational Bayesian statistics (1)
- Variational inference (1)
- Variational multiscale method (1)
- Vehicle-track-soil interaction (1)
- Vehicle–track interaction (1)
- Vitrimer (1)
- Vocabulary providers (1)
- Vulcanization (1)
- Waste management (1)
- Waste streams (1)
- Wastewater flame retardants (1)
- Water transport (1)
- Wave propagation (1)
- Wavenumber integrals (1)
- Waxes (1)
- Weld fatigue (1)
- Weld imperfections (1)
- Wellenausbreitung (1)
- Wheelset accelerations (1)
- Whole-chain CCS scenario (1)
- Wildfire (1)
- Wind energy (1)
- Wind turbine (1)
- Wind turbine tower (1)
- Wire arc additive manufacturing (1)
- Wire break (1)
- Wood (1)
- Wood modification (1)
- Workflow management (1)
- Working life (1)
- X-ray Computed Tomography (CT) (1)
- X-ray computed tomography (CT) (1)
- X-ray computed tomography (XCT) (1)
- Xpoxy resin (1)
- Yield stress (1)
- ZfP (1)
- Zinc (1)
- Zinc coatings (1)
- Zink phytate (1)
- Znc (1)
- layered soil (1)
- magnesium (1)
- melamine (1)
- mortar method (1)
- pH Indicator (1)
- phosphorous flame retardant (1)
- spectral elements (1)
Organisationseinheit der BAM
- 7 Bauwerkssicherheit (196) (entfernen)
Paper des Monats
- ja (18)
Esta pesquisa avaliou o fenômeno de autocicatrização nas propriedades mecânicas e absorção capilar de concretos estruturais. Foram avaliados dois aditivos cristalizantes em pó, dosados de acordo com o teor recomendado pelos fabricantes. Aditivos cristalizantes aumentam a densidade do gel C-S-H e formam cristais insolúveis, bloqueando fissuras. Três traços de concreto foram produzidos: referência, aditivo-X com 0,8% e aditivo-Y com 2,0% em relação a massa do cimento. Aplicou-se 75% da carga de ruptura aos 3- e 14-dias para gerar microfissuras e comparar com a referência. Posteriormente, a autocicatrização foi avaliada aos 28- e 76-dias. A propriedade de resistência à compressão axial foi determinada aos 28-dias, revelando que os aditivos cristalizantes contribuíram para um aumento médio de 12% desta propriedade. A idade do carregamento dos concretos não apresentou um impacto significativo na resistência à compressão axial, mas apontou resultados significativos entre os tipos de aditivos estudados, conforme ANOVA. As propriedades de absorção de água por capilaridade foram avaliadas aos 28- e 76-dias, indicando uma redução de absorção de água média de 42% devido ao uso dos aditivos cristalizantes. Em conclusão, a incorporação dos aditivos cristalizantes contribuiu de maneira positiva para a autocicatrização dos concretos estudados, indicando uma recuperação parcial das microfissuras.
Tests for assessing prestressing steels' susceptibility to hydrogen‐induced stress corrosion cracking are essential for approvals, in‐house monitoring, and third‐party material testing. According to ISO 15630‐3, the time to brittle fracture by constant load under corrosive conditions in thiocyanate test solutions (A or B) at 50°C is measured. In the literature, a high scattering in stress corrosion tests is reported, which questions the integrity of the test procedure. This paper shows the results of studies about the influence of solution composition on hydrogen charging in electrochemical and permeation measurements. Electrochemical experiments show that polished steel surfaces without common drawing layers have more consistent free corrosion currents, polarization resistances, and B‐values in solution A with low scattering compared to the solution B experiments. The influence of temperature at 50°C and an ambient temperature of 22°C was also tested.
Additive manufacturing of concrete structures is a novel and emerging technology. Freecontouring in civil engineering, which allows for entirely new designs, is a significant advantage. Inthe future, lower construction costs are expected with increased construction speeds and decreasingrequired materials and workers. However, architects and civil engineers rely on a certain quality ofexecution to fulfil construction standards. Although several techniques and approaches demonstratethe advantages, quality control during printing is highly challenging and rarely applied. Due to thecontinuous mixing process commonly used in 3D concrete printing, it is impossible to exclude varia-tions in the dry mixture or water content, and a test sample cannot be taken as a representative samplefor the whole structure. Although mortar properties vary only locally, a defect in one layer duringprinting could affect the entire integrity of the whole structure . Therefore, real-time process monitor-ing is required to record and document the printing process.At the Bundesanstalt für Materialforschung und -prüfung (BAM) a new test rig for the additive man-ufacturing of concrete is built. The primary purpose is measuring and monitoring the properties of amortar during the printing process.The following study investigates an approach for calculating yield stress and plastic viscosity based onexperimentally recorded pressure data. The calculations assume that fresh mortar behaves as a Bing-ham fluid and that the Buckingham-Reiner-equation is applicable. A test setup consisting of rigid pipeswith integrated pressure sensors at different positions is utilized.Monitoring the printing process with different sensors is crucial for the quality control of an ongoingprocess.
Thermal transient problems, essential for modeling applications like welding and additive metal manufacturing, are characterized by a dynamic evolution of temperature. Accurately simulating these phenomena is often computationally expensive, thus limiting their applications, for example for model parameter estimation or online process control. Model order reduction, a solution to preserve the accuracy while reducing the computation time, is explored. This article addresses challenges in developing reduced order models using the proper generalized decomposition (PGD) for transient thermal problems with a specific treatment of the moving heat source within the reduced model. Factors affecting accuracy, convergence, and computational cost, such as discretization methods (finite element and finite difference), a dimensionless formulation, the size of the heat source, and the inclusion of material parameters as additional PGD variables are examined across progressively complex examples. The results demonstrate the influence of these factors on the PGD model’s performance and emphasize the importance of their consideration when implementing such models. For thermal example, it is demonstrated that a PGD model with a finite difference discretization in time, a dimensionless representation, a mapping for a moving heat source, and a spatial domain non-separation yields the best approximation to the full order model.
The dripping behaviour of polymers is often observed experimentally through the UL94 flammability standard test. In this work, polymeric dripping under fire is investigated numerically using particle finite element method. A parametric analysis was carried out to observe the influence of a single property on overall dripping behaviour via a UL94 vertical test model. Surrogates and property ranges were defined for variation of the following parameters: glass transition temperature (Tg), melting temperature (Tm), decomposition temperature (Td), density (ρ), specific heat capacity (Cp), apparent effective heat of combustion of the volatiles, char yield (μ), thermal conductivity (k), and viscosity (η). Polyamide, poly(ether ether ketone), poly(methyl methacrylate), and polysulfone were used as benchmarks. Simulated results showed that specific heat capacity, thermal conductivity, and char yield allied with viscosity were the properties that most influenced dripping behaviour (starting time and occurrence).
EPDM, HNBR and FKM materials were exposed at 150 ◦C to air under atmospheric pressure and to hydrogen at 50 bar for different ageing times. All measurements after hydrogen exposure were conducted on samples in degassed condition to assess irreversible effects resulting from that exposure and to compare them to those after ageing in air. Density, hardness, tensile properties, compression set, and hydrogen permeability of all samples were analysed. In both ageing environments, HNBR exhibited the most significant changes of material properties.
However, for both EPDM and HNBR, considerably less severe ageing effects were observed under hydrogen in comparison to ageing in air. On the other hand, FKM showed about the same low level of deterioration in both ageing environments but exhibited poor resistance against damage due to rapid gas decompression in hydrogen environment that can lead to seal failure. The obtained results may serve as a guidance toward a better understanding for design and utilisation of elastomeric materials in future hydrogen infrastructure components.
Reclassification of bridges, i.e., a change in load rating, using reliability-based methods and a direct update with proof load information has been presented by many authors. However, bridge reclassification has hardly been studied from a decision analytic perspective, i.e., with quantification of the risks and benefits of different classification choices, and the expected benefit gain from proof loading. We derive, explain and exemplify a decision analytic approach for bridge reclassification along with models for (1) elastic and ultimate capacity and their adaptation with proof load information, (2) proof load information with classification outcomes accounting for target reliabilities and, (3) utilities including socio-economic benefits from reclassification. The approach and models are exemplified with a case study based on reclassification of bridges with a low existing classification. Decision rules, for practical use by a highway authority to find the optimal classification, are identified and documented based on: (1) the measurement of the capacity at elastic limit by proof loading, (2) the bridge reclassification benefits, and, (3) the required annual reliability level. From a Value of Information analysis, it is concluded that the proof load information is highly valuable for reclassification in cases of high socio-economic benefits and high reliability requirements.
Two-dimensional covalent organic frameworks (COFs) based on phosphinine and thiophene building blocks have been synthesized with two different side groups. The materials are denoted as CPSF-MeO and CPSF-EtO where CxxF correspond to the covalent framework, whereas P and S are related to heteroatoms phosphorous and sulfur. MeO and EtO indicate the substituents, i.e. methoxy and ethoxy.
Their morphologies were studied by scanning electron microcopy and X-ray scattering. The absence of crystalline reflexes in the X-ray pattern reveal that both materials are amorphous and can be considered as glasses. Furthermore, N2 adsorption measurements indicate substantial Brunauer–Emmett–Teller (BET) surface area values pointing to the formation of three-dimensional pores by stacking of the aromatic 2D layer. An analysis of the porosity of both COFs showed a mean radius of the pores to be of ca. 4 nm, consistent with their chemical structure. The COFs form nanoparticles with a radius of around 100 nm. The thermal behavior of the COFs was further investigated by fast scanning calorimetry. These investigations showed that both COFs undergo a glass transition. The glass transition temperature of CPSF-EtO is found to be ca. 100 K higher than that for CPSF-MeO. This large difference in the glass transition is discussed to be due to a change in the interaction of the COF sheets induced by the longer ethoxy group. It might be assumed that for CPSF-EtO more individual COF sheets assemble to larger stacks than for CPSF-MeO. This agrees with the much larger surface area value found for CPSF-EtO compared to CPSF-MeO. To corroborate the results obtained be fast scanning calorimetry dielectric measurements were conducted which confirm the occurrence of a dynamic glass transition. The estimated temperature dependence of the relaxation rates of the dielectric relaxation and their absolute values agrees well with the data obtained by fast scanning calorimetry. Considering the fragility approach to the glass transition, it was further found that CPSF-MeO is a fragile glass former whereas CPSF-EtO behaves as a strong glass forming material. This difference in the fragility points also to distinct differences in the interaction between the 2D COF molecules in both materials.
Wind turbines are exposed to a high number of load cycles during their service lifetime. Therefore, the fatigue strength verification plays an important role in their design. In general, the nominal stress method is used for the fatigue verification of the most common used butt-welded joints. The Eurocode 3 part 1–9 is the current design standard for this field of application. This paper presents recent results of fatigue tests on small-scaled specimens and large components with transverse butt welds to discuss the validity of the FAT-class. Furthermore, results from numerical simulations for the verification with the effective notch stress and the crack propagation approach are used for comparison. Based on the consistency between the numerical results and the fatigue tests, the influence of the seam geometry on the fatigue resistance was investigated. Finally, a prediction of the fatigue strength of butt-welded joints with plate thicknesses up to 80 mm was carried out.
Despite the advances in hardware and software techniques, standard numerical methods fail in providing real-time simulations, especially for complex processes such as additive manufacturing applications. A real-time simulation enables process control through the combination of process monitoring and automated feedback, which increases the flexibility and quality of a process. Typically, before producing a whole additive manufacturing structure, a simplified experiment in the form of a beadon-plate experiment is performed to get a first insight into the process and to set parameters suitably. In this work, a reduced order model for the transient thermal problem of the bead-on-plate weld simulation is developed, allowing an efficient model calibration and control of the process. The proposed approach applies the proper generalized decomposition (PGD) method, a popular model order reduction technique, to decrease the computational effort of each model evaluation required multiple times in parameter estimation, control, and optimization. The welding torch is modeled by a moving heat source, which leads to difficulties separating space and time, a key ingredient in PGD simulations. A novel approach for separating space and time is applied and extended to 3D problems allowing the derivation of an efficient separated representation of the temperature.
The results are verified against a standard finite element model showing excellent agreement. The reduced order model is also leveraged in a Bayesian model parameter estimation setup, speeding up calibrations and ultimately leading to an optimized real-time simulation approach for welding experiment using synthetic as well as real measurement data.