Wissenschaftliche Artikel der BAM
Filtern
Dokumenttyp
Schlagworte
- Laser beam welding (25)
- Additive manufacturing (23)
- Welding (14)
- Microstructure (11)
- Additive Manufacturing (10)
- Hydrogen (10)
- Mechanical properties (10)
- Laser powder bed fusion (9)
- Residual stress (9)
- Residual stresses (9)
- Solidification cracking (8)
- Friction (7)
- Tribology (7)
- Ultrasonic-assisted milling (7)
- Wear (7)
- Creep-resistant steel (6)
- Laser metal deposition (6)
- Process monitoring (6)
- Thermography (6)
- Fatigue (5)
- Resistance spot welding (5)
- Surface integrity (5)
- TIG welding (5)
- AFM (4)
- AISI 316L (4)
- Diffusible hydrogen (4)
- Hardness (4)
- Heat accumulation (4)
- High-strength steel (4)
- Hybrid laser arc welding (4)
- Hybrid laser-arc welding (4)
- L-PBF (4)
- Laser Powder Bed Fusion (4)
- Neutron diffraction (4)
- Numerical modeling (4)
- Selective laser melting (SLM) (4)
- Stress relief cracking (4)
- Thick-walled steel (4)
- AGIL (3)
- Alloy 36 (3)
- Artificial neural network (3)
- Atomic force microscopy (3)
- DED (3)
- Deep penetration (3)
- Fatigue crack propagation threshold (3)
- Fatigue tests (3)
- Heat treatment (3)
- High entropy alloy (3)
- Hydrogen embrittlement (3)
- In situ measurement (3)
- In situ monitoring (3)
- Inconel 718 (3)
- Infrared thermography (3)
- LIBS (3)
- Laser powder bed fusion (L-PBF) (3)
- Mechanical Engineering (3)
- Numerical modelling (3)
- Polymers (3)
- Post weld heat treatment (3)
- Quality assurance (3)
- Steel (3)
- Submerged arc welding (3)
- Ti-6Al-4V (3)
- Tubular X-joints (3)
- Varestraint test (3)
- Weld pool shape (3)
- 316L (2)
- AISI 304L (2)
- Additive manufacturing (AM) (2)
- Alloy modification (2)
- Austenite-to-martensite transformation (2)
- Bragg-edge imaging (2)
- Bulge effect (2)
- Chemical composition (2)
- Computed Tomography (2)
- Computed tomography (2)
- Contact resonance (2)
- Crack (2)
- Cracking (2)
- Critical strain (2)
- Crystallographic texture (2)
- Cyclic R-curve (2)
- Data preparation (2)
- Debye–Waller factor (2)
- Deuterium (2)
- Diffusion (2)
- Directed Energy Deposition (2)
- Distortion (2)
- EBSD (2)
- Electron backscattered diffraction (2)
- Finite element simulation (2)
- Force-distance curves (2)
- Fracture (2)
- Full penetration (2)
- GMA welding (2)
- Gap bridgeability (2)
- Gas metal arc welding (2)
- Gas tungsten arc welding (GTAW) (2)
- Grain refinement (2)
- Hardmetal (2)
- Heat control (2)
- High strength steels (2)
- High-entropy alloy (2)
- High-power laser beam welding (2)
- High-strength structural steel (2)
- Hot cracking (2)
- Hot stamping (2)
- Hydrogen Embrittlement (2)
- Hydrogen assisted cracking (2)
- Hydrogen-assisted cracking (2)
- Implant test (2)
- Inter layer time (2)
- LPBF (2)
- Laser beam melting (LBM) (2)
- Laser energy distribution (2)
- Laser hybrid welding (2)
- Laser-metal-deposition (2)
- Liquid metal embrittlement (2)
- Low transformation temperature (LTT) steel (2)
- Lubricants (2)
- Machining (2)
- Mechanics of Materials (2)
- Medium entropy alloy (2)
- Metals and Alloys (2)
- Microstructure characterization (2)
- Neutron imaging (2)
- Neutron radiography (2)
- Niobium carbide (2)
- Niobium carbide (NbC) (2)
- Numerical process simulation (2)
- Numerical simulation (2)
- Offshore (2)
- Optical flow (2)
- Pipeline steel (2)
- Plasma-transferred arc welding (2)
- Porosity (2)
- Post-weld heat treatment (2)
- Preheating (2)
- Ray tracing (2)
- Refill friction stir spot welding (2)
- Representative specimens (2)
- Residual Stress (2)
- Residual stress analysis (2)
- SSRT (2)
- Selective Laser Melting (2)
- Selective Laser Melting (SLM) (2)
- Simulation (2)
- Single pass welding (2)
- Software (2)
- Surface modification (2)
- Technical crack detection (2)
- Tensile properties (2)
- Texture (2)
- Thermal history (2)
- ToF-SIMS (2)
- Tool wear (2)
- Tribologie (2)
- WAAM (2)
- Weld pool dynamics (2)
- Wire arc additive manufacturing (2)
- X-ray diffraction (2)
- i-TRIBOMAT (2)
- 100Cr6 (AISI 52100) steel (1)
- 2101 duplex stainless steel (1)
- 3D Scanning (1)
- 3D printing (1)
- 9% Ni Steel (1)
- 9%Ni steel (1)
- AC magnetic field (1)
- AHSS (1)
- AM feature integration (1)
- ASTM E647 (1)
- Abdichtbauwerk (1)
- Accoustic emission (1)
- Additive Manufacturing (AM) (1)
- Additives (1)
- Advanced high strength steels (1)
- Advanced high-strength steel (1)
- Aging (1)
- AlMg0.7SiTiB filler wire (1)
- AlSi10Mg (1)
- AlSi10Mg alloy (1)
- Alite (1)
- Alkyd resin-based coating (1)
- Aluminum alloys (1)
- Aluminum bronze (1)
- Analytical calculation (1)
- Applications (1)
- Artificial Intelligence (1)
- Artificial intelligence (1)
- As-built LPBF IN718 alloy (1)
- Atomic force microscope (1)
- Austenitic stainless steels (1)
- Automated arc welding (1)
- Automated manufacturing (1)
- Automotive (1)
- Backlight (1)
- Bainitischer Schmiedestahl (1)
- Bauteilauslegung (1)
- Bayesian technique (1)
- Bead-on-plate welds (1)
- Beam oscillation (1)
- Bending test (1)
- Betriebsfestigkeit (1)
- Binders (1)
- Bismuth titanates (1)
- Bohrlochsonde (1)
- Bruchmechanik (1)
- Bulge formation (1)
- Bulging (1)
- Bulging effects (1)
- CFD model (1)
- Cantilever microprobe (1)
- Carbide (1)
- Carbon (1)
- Carbon dioxide footprint (1)
- Carbon steel (1)
- Catalysis (1)
- Cellular substructure (1)
- Cermet (1)
- Characterisation (1)
- Characterization (1)
- Characterization of corrosion layers (1)
- Charakterisierung (1)
- Charpy impact toughness (1)
- Chunky graphite (1)
- Cimensional Accuracy (1)
- Circumferential weld (1)
- Clinker substitute (1)
- Clustering (1)
- Co-Cr-alloy (1)
- Cobalt-chromium alloy (1)
- Cold cracking (1)
- Cold cracking safety (1)
- Columnar crystal growth (1)
- Component test (1)
- Component-like test (1)
- Composites (1)
- Computed tomography (CT) (1)
- Computer vision (1)
- Condensed Matter Physics (1)
- Condition monitoring (1)
- Convolutional neural network (1)
- Convolutional neural networks (CNN) (1)
- Core-shell structures (1)
- Corrosion (1)
- Crack closure effect (1)
- Crack-tip constraint (1)
- Creep (1)
- Creep behavior (1)
- Creep-resisting materials (1)
- Critical strain rate (1)
- Cryogenic steel (1)
- Cryogenic temperature (1)
- Crystal branch development (1)
- Crystal plasticity (1)
- Cutting forces (1)
- Cutting tool (1)
- Cyclic loading (1)
- Cylindrical turning (1)
- DED-EB (1)
- DED-arc (1)
- Damage prediction (1)
- Damage tolerance (1)
- Data evaluation methods (1)
- Data fusion (1)
- Data-driven quality assurance (1)
- Debye-Waller-Faktor (1)
- Deep learning (1)
- Deep penetration laser beam welding (1)
- Defect detection (1)
- Defects (1)
- Dental materials (1)
- Dichtungen (1)
- Diffraction (1)
- Diffraction-elastic constants (1)
- Diffusion/diffusivity (1)
- Digital Image Correlation (1)
- Digital image correlation (1)
- Digitalisation (1)
- Digitalization (1)
- Direct laser deposition (1)
- Directed energy deposition (1)
- Dislocation density (1)
- Dispersive XAS (1)
- Displacement (1)
- Dissimilar joints (1)
- Dissimilar materials (1)
- Dissimilar metal weld (1)
- Distortion upon baseplate removal (1)
- Ditigtal image correlation (1)
- Dual phase steel (1)
- Duplex AISI 2205 (1)
- Duplex stainless steel (1)
- Duplex stainless steels (1)
- Duplex steels (1)
- Dwell-time (1)
- EBAM (1)
- Edge quality (1)
- Effect of scanning strategies (1)
- Elastic modulus (1)
- Elastomers (1)
- Electrochemical permeation (1)
- Electromagnetic backing (1)
- Electromagnetic field (1)
- Electromagnetic forces (1)
- Electromagnetic stirring (1)
- Electromagnetic weld pool support (1)
- Electromagnetic weld pool support system (1)
- Electron backscatter diffraction (1)
- Electron beam welding (1)
- Electron microscopy (1)
- Element transport (1)
- Embedded electronics (1)
- Emisssivity (1)
- End crater (1)
- Endurance limit (1)
- Energy Engineering and Power Technology (1)
- Environmental conditions (1)
- Environmental impact categories (1)
- Error sources analysis (1)
- Evaporation (1)
- Experimental determination (1)
- Experimental procedure (1)
- FAIR data (1)
- FAT class (1)
- FEM (1)
- Fatigue Strength (1)
- Fatigue damage (1)
- Fatigue life (1)
- Fatigue limit (1)
- Fatigue properties (1)
- Femtosecond laser (1)
- Femtosecond laser processing (1)
- Ferritic spheroidal graphite cast iron (1)
- Ferroelectricity/ferroelectric materials (1)
- Filler material distribution (1)
- Filler wire (1)
- Filler wire mixing (1)
- Finish milling (1)
- Finite Element Method (1)
- Finite element (FE) (1)
- Finite element analysis (1)
- Finite element method (1)
- Finite element method (FEM) (1)
- Flange width (1)
- Flaw detection (1)
- Flüssigmetallinduzierte Rissbildung (1)
- Formation (1)
- Fractography (1)
- Fracture Mechanics (1)
- Frequency domain (1)
- Frequenzanalyse (1)
- Friction stir welding (1)
- Fuel Technology (1)
- Fusion zone size (1)
- Galvanized steel (1)
- General analytical solutions (1)
- Geteilte Infrastruktur (1)
- Green Deal (1)
- HAZ-softening (1)
- HCF (1)
- HSLA steel (1)
- Hard metals (1)
- Hardly separable problem (1)
- Harmonisation (1)
- Hastelloy X (1)
- Heat Treatment (1)
- Heat source models (1)
- Heat-affected zone (1)
- High power laser beam welding (1)
- High process speeds (1)
- High strength steel (1)
- High-entropy alloys (1)
- High-pressure hydrogen environment (1)
- High-strength filler metals (1)
- High-strength steel filler metal (1)
- High-strength steels (1)
- Hochfester Stahl (1)
- Hollow Specimen Technique (1)
- Hollow specimen (1)
- Hollow specimen technique (1)
- Hot Cracks (1)
- Hot cracking test (1)
- Hot tensile test (1)
- Hot working tool steel (1)
- Hybrid Laser arc Welding (1)
- Hybrid repair (1)
- Hydraulic reactivity (1)
- Hydrogen Transfer Film (1)
- Hydrogen diffusion (1)
- Hydrogen measurement (1)
- IBESS (1)
- IBESS Approach (1)
- IN 718 (1)
- IN725 (1)
- ISO 12108 (1)
- Image processing (1)
- Image registration (1)
- Impact Absorbed Energy (1)
- Implants (1)
- In situ (1)
- In-situ process monitoring (1)
- In-situ tensile test (1)
- Inconel 625 (1)
- Industrial and Manufacturing Engineering (1)
- Instumented indentation test (1)
- Integrated alignment features (1)
- Intelligent tribological material characterization (1)
- Intelligente tribologische Werkstoffcharakterisierung (1)
- Inter-layer time (1)
- Interoperability (1)
- Iron aluminide (1)
- Joining dissimilar materials (1)
- Joining technology (1)
- Kernel average misorientation (1)
- Keyhole collapse (1)
- Keyhole dynamics (1)
- Kitagawa-Takahashi diagram (1)
- L-PBF IN718 material (1)
- LCF (1)
- LIBS TIG welding (1)
- LMD (1)
- LTT Weld Filler Materials (1)
- LTT filler metal (1)
- LTT weld filler materials (1)
- Lab-to-field up-scaling (1)
- Lab-to-field upscaling (1)
- Lack-of-fusion (1)
- Lamé curves (1)
- Large-scale test (1)
- Laser Metal Deposition (LMD) (1)
- Laser Powder Bed Fusion (L-PBF) (1)
- Laser Powder Bed Fusion (LPBF) (1)
- Laser Powder Bed Fusion (PBF-LB/M, L-PBF) (1)
- Laser Welding (1)
- Laser beam melting (1)
- Laser cutting (1)
- Laser energy absorption (1)
- Laser implantation (1)
- Laser metal deposition (LMD) (1)
- Laser powder-based directed energy deposition (1)
- Laser welding (1)
- Laser-based additive manufacturing (1)
- Laser-induced oxide layer (1)
- Laser-induced periodic surface strctures (LIPSS) (1)
- Laser-induced periodic surface structures (LIPSS) (1)
- Laser-plasma hybrid (1)
- Lead-free ceramics (1)
- Life cycle assessment (1)
- Lifetime (1)
- Liquid Metal Embrittlement (1)
- Liquid phase sintering (1)
- Local Weld Geometry (1)
- Local critical strain (1)
- Local fatigue approaches (1)
- Local fatigue spproaches (1)
- Localized laser dispersing (1)
- Lorentz force (1)
- Lorentz forces (1)
- Low-cycle fatigue (1)
- L‐PBF (1)
- MVT (1)
- MWIR (1)
- Machine learning (1)
- Machine vision (1)
- Magnesium Alloy (1)
- Magnesium alloy (1)
- Magnetic bath support (1)
- Magnetic field (1)
- Martensite (1)
- Matching ferritic filler metal (1)
- Materials database (1)
- Mechanical anisotropy (1)
- Mechanical mismatching (1)
- Mechanical property (1)
- Melt pool depth (1)
- Melt pool dynamics (1)
- Metal (1)
- Metal mixing (1)
- Microalloying influences (1)
- Microbiologically influenced corrosion (1)
- Microcracking (1)
- Microfocus X-ray computer tomography (μCT) (1)
- Mild steels (1)
- Minimum Waiting Time (1)
- Mining head gear (1)
- Misalignment of edges (1)
- Model calibration (1)
- Model order reduction (1)
- Modellierung (1)
- Modelling studies (1)
- Modification of structural morphology (1)
- Molten pool (1)
- Multi-materials joining (1)
- Multi-physical modelling (1)
- Multi-principal element alloy (1)
- Multi-principal element alloys (1)
- Multiple principal element alloy (1)
- Multiple reflections (1)
- NIR (1)
- Nanotribology (1)
- Nanowear (1)
- Natural silver wires (1)
- Near-surface X-ray diffraction (1)
- Neutron Diffraction (1)
- Neutron and X-ray diffraction (1)
- Ni alloy (1)
- Ni-based austenitic filler metal (1)
- Nickel (1)
- Notch stress approach (1)
- Novel metrology (1)
- Numerical Simulation (1)
- Numerical investigation (1)
- Numerical welding simulations (1)
- Offshore steel grade (1)
- Online Process Monitoring (1)
- Online monitoring (1)
- Open science (1)
- Open source (1)
- Optical Tomography (1)
- Optical tomography (1)
- Oscillating ball-on-disc test (1)
- Oscillating magnetic field (1)
- Oscillating vapor plume (1)
- Oxidation (1)
- PBF-LB/M (1)
- PBF-LB/M/316L (1)
- Parabolic flight (1)
- Partial penetration (1)
- Particle transfer (1)
- Path planning (1)
- Peak stress method (1)
- Peak stress method (PSM) (1)
- Penetration depth (1)
- Periodic solidification pattern (1)
- Piezoresistive (1)
- Piezoresistive cantilever (1)
- Pipe weld preparation (1)
- Plasma cutting (1)
- Plasma-cut samples (1)
- Plasma-transferred-arc (1)
- Plastic deformation (1)
- Polymer (1)
- Polymere (1)
- Polyurethan (1)
- Position detection (1)
- Post Weld Heat Treatment (PWHT) (1)
- Potential drop technique (1)
- Potentiodynamic measurements (1)
- Ppreheating temperature (1)
- Precipitation hardening aluminum alloys (1)
- Pressure-dependent solubility (1)
- Prevention (1)
- Probabilistic assessment (1)
- Process chain (1)
- Process simulation (1)
- Projekt AGIL - Alterung additiv gefertigter metallischer Materialien und Komponenten (1)
- Proper generalized decomposition (1)
- Properties (1)
- Prostheses (1)
- Pulsed laser beam welding (1)
- Quality monitoring (1)
- Ray teacing (1)
- Ray-tracing methods (1)
- Reactor conditions (1)
- Reference data (1)
- Reference standards (1)
- Refraction (1)
- Renewable Energy, Sustainability and the Environment (1)
- Repair welding (1)
- Repair-welding (1)
- Research data management (1)
- Residual Stresses (1)
- Residual stress in AM (1)
- Residual stress state (1)
- Ripples (1)
- Rissbildung in Stahl (1)
- Roughness (1)
- S-N curve (1)
- S-Phase (1)
- SEM (1)
- SIMS (1)
- SLM printed plasma torch (1)
- SWIR (1)
- SWIR thermography (1)
- Sample random results (1)
- Scan strategy influence (1)
- Scanning kelvin probe force microscopy (1)
- Scattering (1)
- Schallemission (1)
- Seam geometry (1)
- Selective laser beam melting (1)
- Selektive-laser-melting (1)
- Shared infrastruture (1)
- Shear modulus (1)
- Ship building (1)
- Shipbuilding steel (1)
- Sicherheit (1)
- Single asperity (1)
- Single asperity contact (1)
- Single-pass welding (1)
- Sliding wear (1)
- Small-scale specimens (1)
- Solidification (1)
- Solubility (1)
- Spark plasma sintering (1)
- Stainless Steel (1)
- Stainless steel (1)
- Stainless steels (1)
- Staircase method (1)
- Statistical analysis (1)
- Steel and aluminium (1)
- Steelmaking slag (1)
- Stochastic sample functions (1)
- Strain fields prediction (1)
- Strain measurement (1)
- Strain-free lattice references (1)
- Strain-free lattice spacing (1)
- Stress Relief Cracking (SRC) (1)
- Stress balance (1)
- Stress balance condition (1)
- Structural stress approach (1)
- Structure analysis (1)
- Sub-oxide (1)
- Supermartensitic steel (1)
- Surface Integrity (1)
- Surface preparation (1)
- Surface processing (1)
- Surface structures (1)
- Synchrotron radiation (1)
- TEKKEN (1)
- Temperature (1)
- Temperature dependence (1)
- Tensile Strength (1)
- Tensile loading (1)
- Tensile resistance spot welding experiment (1)
- Tensile strength (1)
- Tensile testing (1)
- Thermal analysis (1)
- Thermal cycles (1)
- Thermodynamic modelling (1)
- Thermodynamic simulation (1)
- Thick materials (1)
- Thick plate welding (1)
- Thick-plate welding (1)
- Thick-walled (1)
- Titanium (1)
- Trapping (1)
- Tribo-Analytik (1)
- Tribo-analytics (1)
- Tungsten carbide (WC) (1)
- Two-dimensional solidification (1)
- Two-run welding technique (1)
- UV-blocker addition (1)
- Ultraschall-Echoverfahren (1)
- Ultraschall-Messtechnik (1)
- Ultrasonic Assisted Machining (1)
- Ultrasonic machining (1)
- Upscaling (1)
- V-notch impact toughness (1)
- Vaporization (1)
- Varestraint testing (1)
- Verschlussbauwerk (1)
- WRC 1992 diagram (1)
- Wear particles (1)
- Weathering tests (1)
- Weld metal cracking (1)
- Weld pool (1)
- Weldability (1)
- Welded Joints (1)
- Welded joint (1)
- Welded joints (1)
- Welding Simulation (1)
- Welding simulation (1)
- Welding thermal cycle (1)
- Weldx (1)
- Werkstoffdatenbank (1)
- White light interferometry (1)
- Widerstandspunktschweißen (1)
- Wind energy (1)
- Wire electron beam additive manufacturing (1)
- Wire feed laser beam welding (1)
- Wire-based additive manufacturing (1)
- X-ray Diffraction (1)
- X-ray and Neutron Diffraction (1)
- X-ray and neutron diffraction (1)
- X-ray computed tomography (XCT) (1)
- X-ray refraction (1)
- Young's modulus (1)
- Zero wear (1)
- Zerstörungsfreie Prüfung (1)
- Zink (1)
- contact resonance (1)
- infrared Thermography (1)
- µ-gravity (1)
- µCT (1)
- µCT-analysis (1)
- μCT-analysis (1)
Organisationseinheit der BAM
- 9 Komponentensicherheit (215) (entfernen)
Paper des Monats
- ja (9)
Various test methods are available for assessing the susceptibility of materials to solidification cracking during welding. In the widely used Varestraint test, the crack length is selected as a criterion as a function of the applied bending strain.
Unfortunately, the crack length does not characterize the material behavior alone but depends to varying degrees on the individual test parameters used, which makes the interpretation of the results difficult. In addition, the crack length is not comparable under different test conditions. To overcome these disadvantages, we have developed a novel evaluation methodology that decouples the machine influence from the material behavior. The measured crack length is related to the maximum possible value specified by welding speed and deformation time. This relative crack length is calculated numerically, considering the orientation of the cracks. Experiments on two high-alloy martensitic welding consumables show that, in contrast to the conventional evaluation, a comparison of different welding parameters becomes possible. Furthermore, the strain rate proved to be a suitable crack criterion in agreement with Prokhorov's hot cracking model.
Duplex stainless steels combine the positive properties of its two phases, austenite and ferrite. Due to its good corrosion resistance, high tensile strength, and good ductility, it has multiple applications. But laser beam welding of duplex steels changes the balanced phase distribution in favor of ferrite. This results in a higher vulnerability to corrosion and a lower ductility. Herein, different powder combinations consisting of duplex and nickel for coating layers by laser metal deposition (LMD) are investigated. Afterward, laser tracks are welded, and the temperature cycles are measured. The ferrite content of the tracks is analyzed by feritscope, metallographic analysis, and electron backscatter diffraction. The goal is the development of a powder mixture allowing for a duplex microstructure in a two-step process, where first the edges of the weld partners are coated with the powder mixture by LMD and second those edges are laser beam welded. The powder mixture identified by the pretests is tested in the two-step process and analyzed by metallographic analysis, energy-dispersive X-ray spectroscopy, and
Vickers hardness tests. The resulting weld seams show a balanced duplex microstructure with a homogenous nickel distribution and a hardness of the weld seam similar to the base material.
The Directed Energy Deposition process is used in a wide range of applications including the repair, coating or modification of existing structures and the additive manufacturing of individual parts. As the process is frequently applied in the aerospace industry, the requirements for quality assurance are extremely high. Therefore, more and more sensor systems are being implemented for process monitoring. To evaluate the generated data, suitable methods must be developed. A solution, in this context, was the application of artificial neural networks (ANNs). This article demonstrates how measurement data can be used as input data for ANNs. The measurement data were generated using a pyrometer, an emission spectrometer, a camera (Charge-Coupled Device) and a laser scanner. First, a concept for the extraction of relevant features from dynamic measurement data series was presented. The developed method was then applied to generate a data set for the
quality prediction of various geometries, including weld beads, coatings and cubes. The results were compared to ANNs trained with process parameters such as laser power, scan speed and powder mass flow. It was shown that the use of measurement data provides additional value. Neural networks trained with measurement data achieve significantly higher prediction accuracy, especially for more complex geometries.
size limitations and high production costs of L-PBF make it competitive for smaller, highly complex components, while the less complex elements of an assembly are manufactured conventionally. This leads to scenarios that use L-PBF only where it’s beneficial, and it require an integration and joining to form the final product. For example, L-PBF combustion swirlers are welded onto cast parts to produce combustion systems for stationary gas turbines. Today, the welding process requires complex welding fixtures and tack welds to ensure the correct alignment and positioning of the parts for repeatable weld results. In this paper, L-PBF and milled weld preparations are presented as a way to simplify the Tungsten inert gas (TIG) welding of rotationally symmetrical geometries using integrated features for alignment and fixation. Pipe specimens with the proposed designs are manufactured in Inconel 625 using L-PBF and milling. The pipe assembly is tested and TIG welding is performed for validation. 3D scans of the pipes before and after welding are evaluated, and the weld quality is examined via metallography and computed tomography (CT) scans. All welds produced in this study passed the highest evaluation group B according to DIN 5817. Thanks to good component alignment, safe handling, and a stable welding process, the developed designs eliminate the need for part-specific fixtures, simplify the process chain, and increase the process reliability. The results are applicable to a wide range of components with similar requirements.
As onshore installation capacity is limited, the increase in the number of offshore wind turbines (OWT) is a major goal. In that connection, the OWTs continuously increase in size and weight and demand adequate foundations concepts like monopiles or tripods. These components are typically manufactured from welded mild steel plates with thickness up to 200 mm. The predominant welding technique is submerged arc welding (SAW). In accordance with the standards, the occurrence of hydrogen-assisted cracking is anticipated by either a minimum waiting time (MWT, before non-destructive testing of the welded joint is allowed) at ambient or a hydrogen removal heat treatment (HRHT) at elevated temperatures. The effectiveness of both can be estimated by calculation of the diffusion time, i.e., diffusion coefficients. In this study, these coefficients are obtained for the first time for a thick-walled S420G2+M offshore steel grade and its multi-layer SAW joint. The electrochemical permeation technique at ambient temperature is used for the determination of diffusion coefficients for both the base material and the weld metal. The coefficients are within a range of 1025 to 1024 mm2/s (whereas the weld metal had the lowest) and are used for an analytical and numerical calculation of the hydrogen diffusion and the related MWT. The results showed that long MWT can occur, which would be necessary to significantly decrease the hydrogen concentration. Weld metal diffusion coefficients at elevated temperatures were calculated from hydrogen desorption experiments by carrier gas hot extraction. They are within a range of 1023 mm2/s and used for the characterization of a HRHT dwell-time. The analytical calculation shows the same tendency of long necessary times also at elevated temperatures. That means the necessary time is strongly influenced by the considered plate thickness and the estimation of any MWT/HRHT via diffusion coefficients should be critically discussed.
Influence of Surface Preparation on Cracking Phenomena in TIG-Welded High and Medium Entropy Alloys
(2022)
Multi-element systems with defined entropy (HEA—high entropy alloy or MEA—medium entropy alloy) are rather new material concepts that are becoming increasingly important in materials research and development. Some HEA systems show significantly improved properties or combinations of properties, e.g., the overcoming of the trade-off between high strength and ductility. Thus, the synthesis, the resulting microstructures, and properties of HEA have been primarily investigated so far. In addition, processing is crucial to achieve a transfer of potential HEA/MEA materials to real applications, e.g., highly stressed components. Since fusion welding is the most important joining process for metals, it is of vital importance to investigate the weldability of these materials. However, this has rarely been the subject of research to date. For that reason, in this work, the weldability depending on the surface preparation of a CoCrFeMnNi HEA and a CoCrNi MEA for TIG welding is investigated. The fusion welding of longer plates is described here for the first time for the CoCrNi alloy. The welds of both materials showed distinct formation of cracks in the heat affected Zone (HAZ). Optical and scanning electron microscopy analysis clearly confirmed an intergranular fracture topography. However, based on the results, the crack mechanism cannot be conclusively identified as either a liquid metal embrittlement (LME) or hot cracking-like liquid film separation.
The effect of the environmental conditions on the threshold against fatigue crack propagation
(2022)
The threshold against fatigue crack propagation (ΔKth) is a crucial parameter for the damage tolerance assessment of engineering components subjected to cyclic loading and it is composed by two distinct components, one intrinsic, dependent on the elastic material properties and the lattice type, and one extrinsic, related to the occurrence of crack closure effects. An important issue is that several factors can influence ΔKth and, in general, the fatigue crack propagation behavior. In this work, the influence of the experimental procedure, air humidity, stress ratio and test frequency on da/dN-ΔK data has been investigated. Results are discussed with their potential causes and consequences on the calculations of the residual lifetime.
The Kitagawa-Takahashi (KT) diagram is a proven concept for describing the fatigue limit in presence of a defect or crack. It can be determined empirically with great experimental effort. It can also be estimated by means of the El Haddad relationship if the endurance limit and the long fatigue crack propagation threshold are available in reasonable accuracy. A third option is the determination using the cyclic R-curve, which describes the dependency of the fatigue crack propagation threshold on the crack growth at the short crack propagation stage. This can be experimentally determined using a closure-free initial pre-crack. It can then be applied to the determination of crack arrest for a given applied load and a given defect or crack size. Compared to the other two methods mentioned above, this option has considerable advantages: It can be applied to any component and any stress ratio. It allows the treatment of multiple cracks and provides estimations of the S-N curve in the finite life regime as well as at the endurance limit. Compared to the empirical determination of the KT diagram, the experimental effort is significantly lower and compared to the El Haddad approach it avoids problems such as the use of non-conservative long fatigue crack propagation thresholds (when the conventional load reduction method is applied to materials prone to corrosion) and the mathematical predetermination of the curve shape. The work introduces the method and provides a critical discussion as well as quantitative comparison between the different methods.
Al-Si alloys produced by Laser Powder Bed Fusion (L-PBF) techniques allow the fabrication of lightweight free-shape components that find space in aerospace, automotive, biomedical and military applications. Due to the high cooling rates occurring during the building process, L-PBF AlSi10Mg alloys exhibit an ultra-fine microstructure that leads to superior mechanical properties in the as-built condition compared to conventional cast Al-Si materials. Nevertheless, L-PBF processing induces high thermal gradients, leading to deleterious residual stress levels that must be considered to avoid part distortion and unpredicted failures. In order to relax detrimental residual stress and to increase the ductility, post-processing stress relief treatments are generally performed. In as-built condition the hypoeutectic AlSi10Mg microstructure consist of fine α-Al cells containing uniformly dispersed silicon nanoparticles, which are, in addition, surrounded by a eutectic Si network. Above 260°C the silicon interconnectivity starts to breakdown into spheroidized particles and to coarsen. At the same time, the heating residual stresses are relieved.
The objective of the contribution is to investigate, under different heat treatment conditions, the evolution of microstructure and residual stresses in view of optimizing the fatigue performance of the alloy. To this purpose various heat treatments in a range of temperatures between 265°C and 300°C for a duration between 15 minutes and 2 hours are performed. The microstructure modifications are analysed using a scanning electron microscope and the residual stress state is measured by laboratory X-ray diffraction.
Additive manufacturing (AM) is becoming increasingly important in engineering applications due to the possibility of producing components with a high geometrical complexity allowing for optimized forms with respect to the in-service functionality. Despite the promising potential, AM components are still far from being used in safety-relevant applications, mainly due to a lack of understanding of the feedstock-process-properties-performance relationship. This work aims at providing a full characterization of the fatigue behavior of the additively manufactured AISI 316L austenitic stainless steel and a direct comparison with the fatigue performance of the wrought steel. To this purpose, a set of specimens has been produced by laser powder bed fusion (L-PBF) and subsequently heat treated at 900 °C for 1 hour for complete stress relief, whereas a second set of specimens has been machined out of hot-rolled plates. Low cycle fatigue (LCF) and high cycle fatigue (HCF) tests have been conducted for characterizing the fatigue behavior. The L-PBF material had a higher fatigue limit and better finite life performance compared to wrought material. Both, LCF and HCF-testing revealed an extensive cyclic softening.