5 Werkstofftechnik
Filtern
Dokumenttyp
- Vortrag (121)
- Zeitschriftenartikel (71)
- Beitrag zu einem Tagungsband (24)
- Forschungsdatensatz (21)
- Posterpräsentation (20)
- Buchkapitel (7)
- Dissertation (4)
- Forschungsbericht (4)
- Sammelband (Herausgeberschaft für den kompletten Band) (3)
- Monografie (1)
Sprache
- Englisch (227)
- Deutsch (49)
- Französisch (1)
Schlagworte
- Ontology (33)
- Creep (27)
- Microstructure (23)
- Additive manufacturing (21)
- LCF (16)
- Additive Manufacturing (14)
- Degradation (13)
- Fatigue (13)
- Ti-6Al-4V (13)
- Aluminium (11)
- Alloy 2618A (10)
- Coarsening (10)
- FAIR (10)
- 316L (9)
- Aging (9)
- EN AW-2618A (9)
- Low Cycle Fatigue (9)
- Transmission electron microscopy (9)
- Crystal plasticity (8)
- Digitalization (8)
- Nickel-base superalloys (8)
- Ontologie (8)
- Residual stress (8)
- S-phase (8)
- Semantic Web Technologies (8)
- AGIL (7)
- AISI 316L (7)
- Additive Fertigung (7)
- Aluminium alloy (7)
- Anisotropy (7)
- Kriechen (7)
- Mechanical testing (7)
- Plattform MaterialDigital (7)
- Semantic Interoperability (7)
- Thermomechanical fatigue (7)
- Zugversuch (7)
- Data Interoperability (6)
- Knowledge Representation (6)
- Mikrostruktur (6)
- P92 (6)
- TMF (6)
- Computed Tomography (5)
- Crack growth (5)
- Damage (5)
- Dark-field transmission electron microscopy (DFTEM) (5)
- Data mapping (5)
- Digitalisierung (5)
- FAIR data (5)
- FAIR data management (5)
- Fe-Al alloys (5)
- HIP (5)
- Intermetallics (5)
- Iron aluminides (5)
- Knowledge graph and ontologies (5)
- Laser powder bed fusion (5)
- PMD Core Ontology (5)
- Reference data (5)
- Shear modulus (5)
- Stress relaxation (5)
- Tensile Test (5)
- Tensile testing (5)
- Wissensrepräsentation (5)
- Young's modulus (5)
- Aluminum alloys (4)
- Brinell hardness (4)
- Creep-fatigue (4)
- Data Fusion (4)
- EBSD (4)
- Elastic modulus (4)
- Electron microscopy (4)
- Fatigue crack growth (4)
- Laser Powder Bed Fusion (4)
- Microstrucrue Design (4)
- Ni-Resist (4)
- Normung (4)
- Phase-field simulation (4)
- Plattform Material Digital (4)
- Scale-bridging (4)
- Schädigung (4)
- Superalloy (4)
- Tensile Test Ontology (4)
- Tensile test (4)
- Virtual experiments (4)
- Crack (3)
- Crack propagation (3)
- Crack tip opening displacement (3)
- Creep behavior (3)
- Creep data (3)
- Dark-field transmission electron microscopy (3)
- Diffraction (3)
- Digtial Representation (3)
- Electronic Lab Notebook (3)
- Ferritic-martensitic steels (3)
- Fractography (3)
- Hardness (3)
- Heat treatment (3)
- High temperature mechanical properties (3)
- IN 718 (3)
- Interoperability (3)
- Knowledge graph (3)
- Lebensdauer (3)
- Low cycle fatigue (3)
- Mechanical behavior (3)
- Mechanische Eigenschaften (3)
- Metadata schema (3)
- Microstructure evolution (3)
- Ontologies (3)
- PBF-LB/M/316L (3)
- PMDco (3)
- Phase-field (3)
- Precipitation (3)
- Referenzdaten (3)
- Reproducibility (3)
- Research Data Management (3)
- S-Phase (3)
- Semantic Data (3)
- Semantic Web (3)
- Single-crystals (3)
- Superalloys (3)
- Superlegierung (3)
- Syngle Crystal alloy (3)
- Tempered Martensite Ferritic Steels (3)
- Tempered martensite-ferritic steel (3)
- Tensile data (3)
- Thermo-Mechanical Fatigue (3)
- Al-Cu-Li alloys (2)
- Alterung (2)
- Aluminium Alloy (2)
- Aluminum (2)
- Aluminum alloy (2)
- CALPHAD (2)
- CT (2)
- Casting (2)
- Chemo-mechanical coupling (2)
- Computed tomography (2)
- Concrete (2)
- Continnum damage model (2)
- Copper (2)
- Copper alloys (2)
- Creep-Fatigue (2)
- Cyclic softening (2)
- Data Management (2)
- Data Structures (2)
- Data management (2)
- Dataset (2)
- Density-based Thermodynamics (2)
- Density-based model (2)
- Densty-based Thermodynamics (2)
- Diffraction Elastic Constants (2)
- Diffusion (2)
- Digital material representation (2)
- Digital representation (2)
- Digitization (2)
- Dislocation (2)
- Dislocations (2)
- Elasticity (2)
- Electron Backscatter Diffraction (2)
- Electron backscatter diffraction (2)
- Environmentally assisted cracking (2)
- FAIR Data Management (2)
- Fatigue performance (2)
- Fatigue testing (2)
- Finite element analysis (2)
- Fracture mechanics (2)
- Glass forming (2)
- High Cycle Fatigue (2)
- High Temperature Testing (2)
- Joined nickel-based alloys (2)
- Kleinprobenprüfung (2)
- Knowledge Graph (2)
- Laser Powder Bed fusion (2)
- Long-term behavior (2)
- Mass transport (2)
- Material digital (2)
- Materials science (2)
- Metal seal (2)
- Micromechanical model (2)
- Microstructure-property-correlation (2)
- Multiaxial deformation (2)
- NFDI (2)
- Neutron diffraction (2)
- Nickel-base alloy (2)
- Notches (2)
- Ontologien (2)
- Ontology development (2)
- Ostwald ripening (2)
- PMD (2)
- Parametric modeling (2)
- Plastic deformation (2)
- Polymer (2)
- Probengrößeneffekt (2)
- Rapid solidification (2)
- Residual Stress (2)
- S355 steel sheet (2)
- Semantic Representation (2)
- Semantic web (2)
- Semantisches Web (2)
- Simulation (2)
- Simulation of concrete (2)
- Single-Crystal (2)
- Standard (2)
- Standardisierung (2)
- Standardization (2)
- Structural steel (2)
- Superconducting magnet (2)
- Symmetric dwell periods (2)
- TEM (2)
- Tensile Properties (2)
- Thermodynamics (2)
- Ti64 (2)
- TiAl5V4 (2)
- Titan (2)
- Titanium (2)
- Under cyclic loading (2)
- Vickers hardness (2)
- Viscoplasticity (2)
- Wall thickness (2)
- Zugeigenschaften (2)
- 316L stainless steel (1)
- 3D-finite element modeling (1)
- 9-12% Cr ferritic-martensitic steels (1)
- 9-12%Cr steel (1)
- 9–12%Cr steel (1)
- AM (1)
- Abgasturbolader Heißteile (1)
- Accelerated integration scheme (1)
- Accelerated temporal integration (1)
- Accessible (1)
- Age hardening (1)
- Ageing (1)
- Al alloys (1)
- Al-Cu alloy (1)
- Al-Cu-Li-alloy (1)
- Al-Li alloys (1)
- Al2CuMg (1)
- Allgemeine Grundlagen (1)
- Alloy 2818A (1)
- Alloy design (1)
- Alloy microstructure (1)
- Aluminiumlegierung (1)
- Aluminum Alloy Aging (1)
- Anwendungen (1)
- Atomistic simulations (1)
- Aufbau von Festkörpern (1)
- Austenite-to-martensite phase transformation (1)
- Austenitic cast iron (1)
- Austenitischer Stahl (1)
- Automatable digital approach (1)
- Automated finite element analysis (1)
- Automated image analysis (1)
- Automation (1)
- Automatische Finite Element Simulation (1)
- Beanspruchung (1)
- Bitter technique (1)
- Bruch (1)
- CKAN (1)
- CMSX4 (1)
- Calibration (1)
- Carbon steel (1)
- Centrifugal casting (1)
- Centrifugal compressor wheel (1)
- Characterisation (1)
- Characterization (1)
- Charpy test (1)
- Chemische Analyse (1)
- Coefficient of thermal expansion (1)
- Complex borides (1)
- Compositionally complex alloys (1)
- Contact mechanics (1)
- Corrosion (1)
- Craze-crack mechanism (1)
- Creep behaviour (1)
- Creep mechanisms (1)
- Creep, Creep Rupture, and Stress Rupture (1)
- Creep-fatigue interaction (1)
- Crystal Defects (1)
- Crystal Plasticity Modelling (1)
- Crystalline defects (1)
- Cyclic loading (1)
- Cyclic oxidation (1)
- DED-L (1)
- DIN (1)
- Damage Behavior (1)
- Damage behavior (1)
- Data Exchange (1)
- Data Integration (1)
- Data Mapping (1)
- Data format (1)
- Data infrastructures (1)
- Data linking (1)
- Data pipeline concept (1)
- Data storage (1)
- Data structure (1)
- Datenfusion (1)
- Datenökosystem (1)
- Defects (1)
- Defects engineering (1)
- Defects phase diagram (1)
- Defects thermodynamics (1)
- Deformation (1)
- Deformation mechanisms (1)
- Demonstrators (1)
- Die casting (1)
- Differential scanning calorimetry (DSC) (1)
- Digital Transformation (1)
- Digital image correlation (1)
- Digital representations (1)
- Digital workflow (1)
- Digital workflows (1)
- Digitalizations (1)
- Domain Ontology Development (1)
- Dwell periods (1)
- Dwell times (1)
- Dwell-Fatigue (1)
- EN AW 2618A (1)
- EN AW 2618A a (1)
- Eigenschaften (1)
- Eigenspannung (1)
- Elastic constants (1)
- Elastic energy (1)
- Elctronic Lab Notebook (1)
- Electrical resistance (1)
- Electrochemical dressing (1)
- Electropolishing (1)
- Elektronisches Laborbuch (ELN) (1)
- Elektrotechnische Grundlagen (1)
- Energiewende (1)
- Energy transition (1)
- Entwicklung (1)
- Environment (1)
- Environmental Stress Cracking (1)
- Environmental stress cracking (ESC) (1)
- Ermüdung (1)
- Expanding cavity model (1)
- FAIR Data (1)
- FAIR data. (1)
- FAIR principles (1)
- FAIR research data management (1)
- FNCT (1)
- Fatigue crack propagation (1)
- Fatigue damage (1)
- Ferritic–martensitic steel (1)
- Finite elmenet simulation (1)
- Finite-Elemente-Methode (1)
- Fourier series (1)
- Full notch creep test (FNCT) (1)
- Full-Notch Creep Test (1)
- Full-notch creep test (1)
- Fullerite (1)
- GMR (1)
- GMR sensors (1)
- Gefügeuntersuchung (1)
- Gefügte Nickelbasislegierungen (1)
- General Chemistry (1)
- General Computer Science (1)
- General Engineering (1)
- General Materials Science (1)
- Glas (1)
- Gleichgewicht (1)
- Grade S960QL steel (1)
- Gradient-enhanced fatigue model (1)
- Grain Boundary Phase Diagram (1)
- Grain Boundary Segregation (1)
- Grain Boundary Spinodal (1)
- Grain boundaries (1)
- Grain boundary (1)
- Grain boundary phase diagram (1)
- Grain boundary thermodynamics (1)
- Graphic design (1)
- Grundlagen des Maschinenbaus (1)
- HCF (1)
- Hardness test (1)
- Heat Treatment (1)
- Hertzian cracks (1)
- High cycle fatigue (1)
- High entropy alloy (1)
- High entropy alloys (1)
- High-Entropy Alloys (1)
- High-entropy alloys (1)
- High-strength steel (1)
- High-temperature corrosion (1)
- Hochentropie-Legierung (1)
- Hochtemperatur (1)
- Hochtemperaturermüdung (1)
- Honing (1)
- Honing Stone (1)
- Hot isostatic pressing (HIP) (1)
- IN718 (1)
- In-Situ Testing (1)
- In-situ Process Monitoring (1)
- In-situ SEM micro shear deformation (1)
- In-situ diffraction (1)
- Inconel 718 (1)
- Incremental lifetime models (1)
- Indentation (1)
- Industrial and Manufacturing Engineering (1)
- Informationstechnische Grundlagen (1)
- Interfacial Spinodal (1)
- Interfacial anisotropy (1)
- Interfacial free energy (1)
- Intermetallische FeAl-Legierungen (1)
- Interoperable (1)
- Inverse ostwald ripening (1)
- Investment casting (1)
- Irregular topography (1)
- Isostatic hot pressing (HIP) (1)
- Kennwertermittlung (1)
- Keramik (1)
- Knowledge Graphs (1)
- Knowledge graphs (1)
- Knowledge representation (1)
- Korrosion (1)
- Kreislaufwirtschaft (1)
- Kriechermüdung (1)
- Kristallsystem (1)
- Kupfer (1)
- L-PBF 316L (1)
- LMD (1)
- Laser Poeder Bed Fusion (1)
- Laser Powder Bed Fusion (LPBF) (1)
- Laser Scanning Microscopy (1)
- Laser beam melting (LBM) (1)
- Laser powder-based directed energy deposition (1)
- Laser scanning microscopy (LSM) (1)
- Laser-Pulverbettschmelzen (1)
- Layering misalignment (1)
- Lebensdauervorhersage (1)
- Legierung mit komplexer Zusammensetzung (1)
- Life cycle (1)
- Lifetime prediction (1)
- Linked open data (1)
- Long-term aging (1)
- Low Cycle Fatigue (LCF) (1)
- Low carbon steel (1)
- Low strain (1)
- Low-Cycle Fatigue (LCF) (1)
- Low-Cycle-Fatigue (1)
- Low-cycle fatigue (1)
- Low-cycle fatigue. (1)
- Low-cycle-fatigue behaviour (1)
- Lötverbindung (1)
- Machine learning (1)
- Magnetic domain distribution (1)
- Magnetic domains (1)
- Magnetic stray field (1)
- Magnetic stray fields (1)
- Magnetische Domänen (1)
- Magnetoelastic effect (1)
- Magnetoelastischer Effekt (1)
- Magnetomechanical effect (1)
- Martensitic transformation (1)
- Mat-o-lab (1)
- Material Life Cycle (1)
- Material degradation (1)
- Material modeling (1)
- MaterialDigital (1)
- Materialcharakterisierung (1)
- Materialentwicklung (1)
- Materialkreislauf (1)
- Materialprüfung (1)
- Materials Chemistry (1)
- Materials Science (1)
- Materials Testing (1)
- Materials and Processes Data Reusability (1)
- Materials informatics (1)
- Materials science and engineering (1)
- Materials testing (1)
- Mathematisch-naturwissenschaftliche Grundlagen (1)
- Mechanical Engineering (1)
- Mechanical Properties (1)
- Mechanical anisotropy (1)
- Mechanics of Materials (1)
- Mechanisches Verhalten (1)
- Mechanistic Modelling (1)
- Mehrachsige Verformung (1)
- Mehrskalenmodell (1)
- Metal Magnetic Memory (1)
- Metal magnetic memory (1)
- Metall (1)
- Metals and Alloys (1)
- Micro computed tomography (1)
- Microstructural evolution (1)
- Microstructure analysis (1)
- Microstructure characterisation (1)
- Microstructure modification (1)
- Mid-Level Ontology for MSE (1)
- Mikro-Computertomographie (1)
- Mikrostrukturentwicklung (1)
- Mikrostrukturuntersuchung (1)
- Miniature specimens (1)
- Misfitting precipitate (1)
- Missing acknowledgment (1)
- Model (1)
- Modeling (1)
- Modell (1)
- Molecular dynamics (1)
- NFDI-MatWerk (1)
- NIST (1)
- Nanocrystalline alloys (1)
- Nanoindentation (1)
- NiTi (1)
- Nickel alloys (1)
- Nickel-base superalloy (1)
- Nimonic 75 (1)
- Non-destructive Materials (1)
- Non-destructive testing (1)
- Notch (1)
- Number density (1)
- Numerische Simulation (1)
- Ordering (1)
- Orowan Mechanism (1)
- Overaging (1)
- P92 steels (1)
- PE-HD (1)
- Phase Diagram (1)
- Phase field crystal (1)
- Phase field method (1)
- Phase field model (1)
- Phase field simulation (1)
- Phase stability (1)
- Phase-field model (1)
- Plasticity (1)
- Platform Material Digital (1)
- Platform Material Digital (PMD) (1)
- Platform MaterialDigital (1)
- Platform MaterialDigital (PMD) (1)
- Plattform Material Digital (PMD) (1)
- Polyethylene (1)
- Pore (1)
- Pores (1)
- Porosity (1)
- Positron annihilation spectroscopy (1)
- Power plant (1)
- Precipitate shape (1)
- Precipitates (1)
- Precipitation Analysis (1)
- Precipitation hardening (1)
- Process development (1)
- Quantitative Precipitation Analysis (1)
- Quantitative image analysis (1)
- Radii distribution (1)
- Rafting (1)
- Reference Data (1)
- Reference Dataset (1)
- Reference material BCR-425 (1)
- Referenzmaterial (1)
- Referenzorganismus (1)
- Referenzverfahren (1)
- Reheating (1)
- Relaxation fatigue (1)
- Relaxation tests (1)
- Resonance testing (1)
- Reusability (1)
- Reusable data (1)
- Rissausbreitung (1)
- Risse (1)
- Rissform (1)
- Rissfortschritt (1)
- Rissverlauf (1)
- SEN-Probe (1)
- Safety (1)
- Schadenskunde (1)
- Selective laser melting (1)
- Selective laser melting (SLM) (1)
- Semantic Data Integration (1)
- Semantic Interioerability (1)
- Semantic Web technologies (1)
- Semantic data integration (1)
- Semantic interoperability (1)
- Semantic structuring (1)
- Semantische Daten (1)
- Shape memory alloy (1)
- Shape memory alloys (1)
- Shear testing (1)
- Simulationsgestützte Gießkonzepte (1)
- Single crystal superalloys (1)
- Single-crystal (1)
- Slow crack growth (SCG) (1)
- Solidification (1)
- Spinodal Decomposition (1)
- Spinodal decomposition (1)
- Standardisation (1)
- Strain difference (1)
- Strain energy (1)
- Strength (1)
- Stress-strain behavior (1)
- Stress-strain-behavior (1)
- Structured Data (1)
- Struktur (1)
- Superalloy single crystals (1)
- T1 precipitate (1)
- TIG-welding (1)
- TMF experiments (1)
- Temperature dependence (1)
- Tempered martensite ferritic steels (1)
- Tensile properties (1)
- Tensile strength (1)
- Tensile stress relaxation (1)
- Tensile stress relaxation testing (1)
- Tensile tests (1)
- Texture (1)
- Thermal Cycling (1)
- Thermal expansion (1)
- Thermo-mechanical fatigue (1)
- Thermographie (1)
- Thermomechanical Fatigue (TMF) (1)
- Thermomechanische Ermüdung (1)
- Thermophysikalische Eigenschaften (1)
- Thesaurus (1)
- Thickening (1)
- Tools (1)
- Topography (1)
- Transmission electron microscopy (TEM) (1)
- Tribologie (1)
- Ungleichgewicht (1)
- Unlegierter Baustahl (1)
- Vacancies (1)
- Verbundwerkstoff (1)
- Vernetzung (1)
- Vickers Hardness (1)
- Virtueller Materialdatenraum (1)
- Viskoplastisch (1)
- Visual ontology development (1)
- Vocabulary providers (1)
- Volume fraction (1)
- Werkstoffauswahl (1)
- Werkstoffkennwerte (1)
- Werkstoffmechanische Prüfung (1)
- Werkstoffprüfung (1)
- Workshop (1)
- X-ray computed tomography (CT) (1)
- Young`s modulus (1)
- Young´s modulus (1)
- Zerstörungsfreie Prüfung (1)
- Zugversuchsontologie (1)
- coarsening (1)
- hardness (1)
- microstructural changes (1)
- γ″ phase (1)
- θ′ phase (1)
- θ′-(Al2Cu) precipitate phase (1)
Organisationseinheit der BAM
- 5.2 Metallische Hochtemperaturwerkstoffe (277) (entfernen)
Paper des Monats
- ja (1)
Rapid solidification leads to unique microstructural features, where a less studied topic is the formation of various crystalline defects, including high dislocation densities, as well as gradients and splitting of the crystalline orientation. As these defects critically affect the material’s mechanical properties and performance features, it is important to understand the defect formation mechanisms, and how they depend on the solidification conditions and alloying. To illuminate the formation mechanisms of the rapid solidification induced crystalline defects, we conduct a multiscale modelling analysis consisting of bond-order potential-based molecular dynamics (MD), phase field crystal-based amplitude expansion simulations, and sequentially coupled phase field–crystal plasticity simulations. The resulting dislocation densities are quantified and compared to past experiments. The atomistic approaches (MD, PFC) can be used to calibrate continuum level crystal plasticity models, and the framework adds mechanistic insights arising from the multiscale analysis.
This article is part of the theme issue ‘Transport phenomena in complex systems (part 2)’.
Laser powder bed fusion (LPBF) is an additive manufacturing process for materials which inherently tends to yield various degrees of metastable hierarchical microstructures, defects and high residual stresses in the as-built condition depending on the process parameters. The understanding of the evolution of these typical features during heat treatment and subsequent thermal and mechanical ageing is crucial for the wider acceptance for safety critical structures. A multi-disciplinary research project at BAM studying the development of the microstructure, defects, residual stresses typical of LPBF 316L and their evolution during thermal and mechanical ageing has led to insights into the stability of these inherent features. This presentation aims to give a broad overview of the project with a few specific cases of investigation. Firstly, the formation of residual stresses, the nature of the initial microstructure, the tensile properties and a modelling approach to understand the anisotropy will be presented. This will be followed by examples of studies of their evolution during heat treatment, long term thermal exposure, and room temperature and high temperature mechanical testing compared to a baseline of conventional wrought variant of the same alloy.
Die Entwicklung digitaler Prozesse für die Materialwissenschaft und Werkstofftechnik muss naturgemäß auch die Charakterisierungsmethoden der Werkstoffprüfung abbilden, die oft durch eine hohe Komplexität gekennzeichnet sind. Als vorteilhaft erweist sich dabei der hohe Standardisierungsgrad, der sich z.B. in klaren Anforderungen an die eingesetzten Prüfmittel und festgelegten Vorgehensweisen ausdrückt. Diese können (und müssen) in entsprechenden digitalen Versuchsbeschreibungen abgebildet werden, wobei sich die klaren Datenstrukturen und Terminologien als vorteilhaft erweisen.
Porosity in single-crystal nickel-base superalloys is removed by hot isostatic pressing (HIP) at temperatures above gamma’-solvus where the material is very soft and ductile. For example, single-crystal nickel-base superalloy CMSX-4 is HIPed at temperature 1288 °C, which is slightly higher than the gamma’-solvus temperature of this alloy equal to about 1280 °C. It is assumed that pore shrinking during HIP is mostly due to dislocation creep. Such a modelling of HIP of CMSX-4 was started in our group on the base of results of creep tests of [001] single-crystals at 1288 °C [1]. However, it was found later [2] that the alloy CMSX-4 shows very strong creep anisotropy at 1288 °C. Therefore, for calibration of the creep law, creep tests of different orientations under different stress levels are required at the HIP temperature. This was the main task of present work. Single-crystals of CMSX-4 of axial orientations [001], [011], [123] and [111] were cast by VIAM Moscow and tested by BAM Berlin under creep conditions at 1288 °C and stress levels between 4 MPa and 16 MPa. At all stress levels, the creep rate increases by an order of magnitude when changing the orientation from [001] to [111] with [011] and [123] orientations in between. Such a character of creep anisotropy corresponds to the orientation dependence of the Schmid factor for octahedral glide.
The crystal viscoplasticity model developed in [1] was improved to better represent the time induced softening observed during creep. The creep tests for different stresses and orientations as well as pore closure were simulated. The results of pore closure simulation are compared with measurements of porosity decrease during Hiping.
Creep and creep damage behavior of stainless steel 316L manufactured by laser powder bed fusion
(2022)
This study presents a thorough characterization of the creep properties of austenitic stainless steel 316L produced by laser powder bed fusion (LPBF 316L) contributing to the sparse available data to date. Experimental results (mechanical tests, microscopy, X-ray computed tomography) concerning the creep deformation and damage mechanisms are presented and discussed. The tested LPBF material exhibits a low defect population, which allows for the isolation and improved understanding of the effect of other typical aspects of an LPBF microstructure on the creep behavior. As a benchmark to assess the material properties of the LPBF 316L, a conventionally manufactured variant of 316L was also tested. To characterize the creep properties, hot tensile tests and constant force creep tests at 600 °C and 650 °C are performed. The creep stress exponents of the LPBF material are smaller than that of the conventional variant. The primary and secondary creep stages and the times to rupture of the LPBF material are shorter than the hot rolled 316L. Overall the creep damage is more extensive in the LPBF material. The creep damage of the LPBF material is overall mainly intergranular. It is presumably caused and accelerated by both the appearance of precipitates at the grain boundaries and the unfavorable orientation of the grain boundaries. Neither the melt pool boundaries nor entrapped gas pores show a significant influence on the creep damage mechanism.
Zur Bewältigung der Herausforderung bei der Digitalisierung von Materialien und Prozessen ist eine mit allen Stakeholdern konsistente Kontextualisierung von Materialdaten anzustreben, d.h. alle erforderlichen Informationen über den Zustand des Materials einschließlich produktions- und anwendungsbezogener Änderungen müssen über eine einheitliche, maschinenlesbare Beschreibung verfügbar gemacht werden. Dazu werden Wissensrepräsentationen und Konzeptualisierungen ermöglichende Ontologien verwendet. Erste Bemühungen in den beiden Projekten Plattform Material Digital und Materials-open-Laboratory führten zur Erstellung von Anwendungsontologien, die Prozesse und Testmethoden explizit beschreiben. Dabei wurde u.a. der Zugversuch an Metallen bei Raumtemperatur nach DIN EN ISO 6892-1 ontologisch beschrieben. Diese als Beispiel dienende Ontologieentwicklung wird in dieser Präsentation vorgestellt.
From molecular dynamics simulations and the capillary fluctuation method, the solid-liquid interfacial free energy has been computed for the B2-liquid interface in the Cu-Zr system. Consistent with previous results for the FCC-liquid interface in Cu-Zr and Al-Sm but atypical of most alloys, was found to increase as the temperature is lowered. In addition, the temperature dependence was obtained for model Lennard-Jones B2-liquid alloys. In all cases the unusual temperature dependence of is correlated with an atomic structure of the interfacial region characterized by a misalignment of the number density peaks between solvents and solutes. In cases where the number density peaks are aligned, the typical temperature dependence is observed. The results are discussed in terms of the Gibbs theory of the thermodynamics of interfaces. It is proposed that the unique interfacial structure and the atypical temperature dependence of are hallmarks of an easy glass forming alloy.
Iron aluminides depict a sustainable and light-weight material class which could be employed in many applications requiring high strength at intermediate to high temperatures. According to first results, the alloy Fe-26Al-4Mo-0.5Ti-1B surpasses conventional materials in wet corrosion resistance and creep resistance up to 650 °C. For these reasons, the AiF research project “WAFEAL – Materials applications for iron aluminides” was initiated to transfer these findings into a standardised materials dataset and to derive best practices for processing. In the first place, a set of different microstructures adjusted by varying casting methods, wall thicknesses and heat treatments was investigated and correlated with hardness on macro and micro scale. Correlations were drawn between solidification rates and resulting grain sizes and hardness. The effect of vacancy hardening was only verified for wall thickness as low as 2.5 mm. Moreover, a common decrease of macrohardness after a heat treatment at 1000 °C for 100 h was observed irrespective of casting process or wall thickness. This effect was linked with an unexpected decrease of the complex boride phase fraction which acts as a hardening phase.
Die Digitalisierung von Materialien und Prozessen stellt eine große Herausforderung dar, die nur durch eine Bündelung der Bemühungen aller Beteiligten in diesem Bereich erreicht werden kann. Bei einer derartigen digitalen Beschreibung spielen Datenanalysemethoden, eine Qualitätssicherung von Prozessen inklusive Input- und Output-Daten sowie die Interoperabilität zwischen Anwendungen nach den FAIR-Prinzipien eine wichtige Rolle. Dies umfasst das Speichern, Verarbeiten und Abfragen von Daten in einer vorzugsweise standardisierten Form (Beteiligung von Normungsgremien).
Zur Bewältigung dieser Herausforderung ist eine mit allen Stakeholdern konsistente Kontextualisierung der Materialdaten anzustreben, d.h. alle erforderlichen Informationen über den Zustand des Materials einschließlich produktions- und anwendungsbezogener Änderungen müssen über eine einheitliche, maschinenlesbare Beschreibung verfügbar gemacht werden. Dazu werden Wissensrepräsentationen und Konzeptualisierungen ermöglichende Ontologien verwendet. Eine zentrale Betrachtungsweise in diesem Zusammenhang ist die Realisierung von (automatisierten) Datenpipelines, die eine Beschreibung und Verfolgung von Daten ausgehend von ihrer Erzeugung, bspw. in einem Messgerät, bis zu ihrer globalen Verwendung in möglicherweise verschiedenen Kontexten beinhalten.
Erste Bemühungen und Ansätze zu diesen Problemstellungen führten im Projekt Innovations-Plattform Material Digital (PMD, materialdigital.de) zur Erstellung von Anwendungsontologien, die Prozesse und Testmethoden explizit beschreiben. Dabei wurde u.a. der Zugversuch an Metallen bei Raumtemperatur nach ISO 6892-1 ontologisch beschrieben. Diese als Beispiel dienende Ontologieentwicklung wird in dieser Präsentation vorgestellt. Weiterhin wurde, ausgehend von der domänenspezifischen Entwicklung von Anwendungsontologien, eine Kernontologie erstellt, die eine übergeordnete Verbindung von ontologischen Konzepten aufgrund der Verwendung gleichen Vokabulars und semantischer Verknüpfungen erlaubt. Diese sowie die das PMD-Projekt selbst werden ebenfalls in dieser Präsentation vorgestellt.
The Gibbs free energy of a grain boundary is a complex thermodynamic function of temperature, pressure, and composition. These complexities add to the intrinsic crystallographic and chemical constraints imposed by the adjacent bulk phase. Recently we have proposed a density-based model for assessing grain boundary thermodynamics that enables a CALPHAD-informed description of the grain boundary. As such, the Gibbs free energy of the grain boundary is directly linked with available CALPHAD thermodynamic data. In this talk, new aspects of interfacial segregation and phase transformation are revealed by benchmarking the current model for various experimental cases, including several steels, high-entropy alloys and aluminum alloys. The effects of elastic interactions on the grain boundary segregation and the application of the model to a nanocrystalline Pt-Au alloy, with numerous grain boundaries of various characters, will be discussed.
Due to the diversity of materials and the processes associated with their production and use, the complexity of the lifecycles of materials and the multitude of academic and industrial researchers participating in generation of data for material design impose a huge challenge. The topical goal of digitalizing materials and processes can only be adequately addressed by consolidating the efforts of all stakeholders in this field. There are many scattered activities, but there is a demand for an elimination of redundancies as well as an advance in acceptance and a common basis in the digitalization of materials. Furthermore, data analysis methods play an important role in both, the experimental and simulation-based digital description of materials, but they have been poorly structured so far.
Therefore, the two joint projects Platform Material Digital (PMD, materialdigital.de) and Materials open Laboratory (Mat-o-Lab, matolab.de) aim to contribute to a standardized description of data processing methods in materials research. Besides stimulating the formation of a collaborative community in this respect, their main technical goals are the quality assurance of the processes and the output data, the acquisition and definition of their accuracy as well as the interoperability between applications. In this regard, data management in accordance with the FAIR (findability, accessibility, interoperability, reuseability) principles is addressed. There is a common agreement in the scientific community following current discussions that data is supposed to be conform to these principles. This includes storage, processing and querying of data in a preferably standardized form.
To meet the challenge to contextualize material data in a way that is consistent with all stakeholders, all necessary information on the condition of the material including production and application-related changes have to be made available via a uniform, machine-readable description. For this purpose, ontologies are to be used since they allow for machine-understandable knowledge representations and conceptualizations that are needed for data management and the digitalization in the field of materials science.
As first efforts in PMD and Mat-o-Lab, application ontologies are created to explicitly describe processes and test methods. Thereby, the well-known tensile test of metals at room temperature was described ontologically in accordance with the respective ISO standard 6892-1:2019-11.
The efforts in creating this tensile test application ontology are shown in this presentation. Especially, the path of ontology development based on standards to be pursued is focused, which is in accordance with the generic recommendations for ontology development and which is supposed to be exemplary for the creation of other application ontologies.
The large number of TEM investigations and the regular microstructure
of single-crystal nickel-base superalloys has boosted the development of a number of physically motivated constitutive laws. In contrast to the more phenomenological models discussed in the next chapter, these models use dislocation densities as internal variables. Obvious advantages are that the computed densities can be compared to TEM observations and the Deformation mechanisms can be easier translated into mathematical equations.
The elastic constants are the most basic mechanical properties of a material and are needed for any structural analysis of a component. For example, they have a major influence on the eigenfrequencies of vibrating parts. Single crystals of Ni-base superalloys are strongly anisotropic, which means that the observed properties are orientation dependent. Tensor algebra is then required to mathematically formulate the elastic properties and their relations to the crystal orientation. Hence, this chapter first summarizes some basic definitions and calculation rules for Rotation matrices, including the definition of the Euler angles, which are most commonly used to define the relative orientations of the crystal and the component. Parts of this chapter closely follow the lines of the excellent exposition of the topic by Olschewski.
The elastic energy of mixing for multi-component solid solutions is derived by generalizing Eshelby's sphere-in-hole model. By surveying the dependence of the elastic energy on the chemical composition and lattice misfit, we derive a lattice strain coefficient λ*. Studying several high-entropy alloys and superalloys, we propose that most solid solution multi-component alloys are stable when λ*<0.16, generalizing the Hume-Rothery atomic-size rule for binary alloys. We also reveal that the polydispersity index δ, frequently used for describing strain in multi-component alloys, directly represents the elastic energy e with e=qδ², q being an elastic constant. Furthermore, the effects of (i) the number and (ii) the atomic-size distribution of constituting elements on the phase stability of high-entropy alloys were quantified. The present derivations and discussions open for richer considerations of elastic effects in high-entropy alloys, offering immediate support for quantitative assessments of their thermodynamic properties and studying related strengthening mechanisms.
Thermal cycling of a Ni-excess NiTi alloy was conducted between 50 °C and liquid nitrogen temperature to induce martensitic transformations and to reverse them after. The starting point was an annealed and slowly cooled state, the end point a sample thermally cycled 1500 times. Positron annihilation lifetime spectra and Coincidence Doppler Broadening profiles were obtained in various states and at various tem- peratures. It was found that the initial state was low in defects with positron lifetimes close to that of bulk NiTi. Cycling lead to a continuous build-up of a defect structure up to 20 0 −50 0 cycles after which saturation was reached. Two types of defects created during cycling were identified, namely pure dislo- cations and vacancies attached to dislocations.
Ti-6Al-4V alloy is intensively used in the aerospace industry because of its high specific strength. However, the application of Laser Powder Bed Fusion (LPBF) Ti-6Al-4V alloy for structurally critical load-bearing components is limited. One of the main limiting factors affecting the structural integrity, are manufacturing defects. Additionally, the high cooling rates associated with LPBF process result in the formation of large residual stress (RS) with complex fields. Such RS can cause cracking and geometrical distortions of the part even right after production. Also, the microstructure of LPBF Ti-6Al-4V in the as-built condition is significantly different from that of the conventionally produced alloy. All these factors affect the mechanical behavior of the material. Therefore, to improve the material performance it is important to evaluate the individual effect of RS, defects, and microstructure on fatigue life. To this aim Ti-6Al-4V LPBF material in as-built condition and subjected to different post-processing, including two heat treatments (for stress relief and microstructural modification) and Hot Isostatic Pressing (HIP, for densification), were investigated.
Prior to fatigue tests at elevated temperature, the microstructure, the mesostructure, and subsurface RS on the fatigue samples were investigated. It was found that the fatigue performance of HIPped samples is similar to that of conventionally produced Ti-6Al-4V. The tensile RS found at the surface of as-built samples decreased the fatigue life compared to heat-treated samples. Additionally, the modification of the microstructure (by heat treatment) did not affect the fatigue performance in the regime of mostly elastic strain. This shows that in the absence of tensile RS the manufacturing defects solely control the failure of LPBF components and densification has the strongest effect on the improvement of the mechanical performance.
A γ-analogue of the superalloy CMSX-4 that does not contain the strengthening γ′ -phase and only consists of the γ-solid solution of nickel has been designed, solidified as single-crystals of different orientations, and tested under creep conditions in the temperature range between 1150 and 1288 °C. The tests have revealed a very high creep anisotropy of this alloy, as was previously found for CMSX-4 at supersolvus temperature of 1288 °C. This creep anisotropy could be explained by the dominance of 〈011〉{111} octahedral slip. Furthermore, the analysis of the creep data has yielded a high value of the creep activation energy, Qc≈442 kJ/mol, which correlates with the high activation energy of Re diffusion in Ni. This supports the hypothesis that dislocation motion in the γ-matrix of Re-containing superalloys is controlled by the diffusion of the Re atoms segregating at the dislocation core. The Norton stress exponent n is close to 5, which is a typical value for pure metals and their alloys. The absence of γ′ -reprecipitation after high-temperature creep tests facilitates microstructural investigations. It has been shown by EBSD that creep deformation results in an increasing misorientation of the existing low angle boundaries. In addition, according to TEM, new low angle boundaries appear due to reactions of the a/2 〈011〉 mobile dislocations and knitting of new networks.
The phase-like behavior of grain boundaries (GBs), recently evidenced in several materials, is opening up new possibilities in the design of alloy microstructures. In this context, GB phase diagrams are contributing to a predictive description of GB segregation and (interfacial) phase changes. The influence of chemo-mechanical solute-GB interactions on the GB phase diagram remains elusive so far. This is particularly important for multi-component alloys where the elastic interactions among solute atoms, of various sizes and bonding energies, can prevail, governing a complex co-segregation phenomenon. Recently, we developed a density-based model for GB thermodynamics that intrinsically accounts for GB elasticity in pure elements. In this work, we incorporate the homogeneous and heterogeneous elastic energies associated with the solutes into the density-based framework. We derive the multi-component homogeneous elastic energy by generalizing the continuum misfitting sphere model and extend it for GBs. The density-based free energy functional directly uses bulk CALPHAD thermodynamic data. The model is applied to binary and ternary Al alloys. We reveal that the elastic energy can profoundly affect the GB solubility and segregation behavior, leading to Cu segregation in otherwise Cu-depleted Al GBs. Consequently, GB segregation transition, i.e., a jump in the GB segregation as a function of alloy composition, is revealed in Al-Cu and Al-Cu-Mg alloy systems with implications for subsequent GB precipitation in these alloys. CALPHAD-informed elasticity-incorporated GB phase diagrams enable addressing a broader range of GB phenomena in engineering multi-component alloys.