5 Werkstofftechnik
Filtern
Dokumenttyp
- Zeitschriftenartikel (54) (entfernen)
Sprache
- Englisch (54) (entfernen)
Referierte Publikation
- nein (54) (entfernen)
Schlagworte
- Corrosion (7)
- Additive manufacturing (6)
- Additive Manufacturing (4)
- CCS (4)
- Steel (4)
- Corrosion Fatigue (3)
- High alloyed steel (3)
- Alkali zinc borate glasses (2)
- Aquifer (2)
- Binder Jetting (2)
- Carbon storage (2)
- Corrosion fatigue (2)
- Creep (2)
- Damage (2)
- Glass (2)
- Heat treatment (2)
- High Alloyed Steel (2)
- Layerwise Slurry Deposition (2)
- Lead borate glasses (2)
- Nanoparticles (2)
- Pitting (2)
- X-ray diffraction (2)
- 150 Years (1)
- 2PP (1)
- 3D-printing (1)
- ATZ (1)
- Acid-leaching (1)
- Additive manufactured Ni-base superalloys (1)
- Adolf Martens (1)
- Advanced wastewater treatment (1)
- Agglomerates (1)
- Aging (1)
- Al2O3 (1)
- Alkali-activated materials (1)
- Alpha-tricalcium phosphate (1)
- Alumina toughened zirconia (1)
- Aluminosilicate glasses (1)
- Aluminum alloy (1)
- Amorphous silica (1)
- Annealing (1)
- Bio-ceramic engineering (1)
- Blended learning (1)
- Bond energy (1)
- Brown-rot fungi (1)
- CALPHAD (1)
- Cabon capture and storage (1)
- Carbidic austempered ductile iron (1)
- Carbon capture and storage (1)
- Ccs (1)
- Ceramic (1)
- Ceramic nano particles (1)
- Ceramics (1)
- Ceramics 3D printing (1)
- Co2-Storage (1)
- Coating (1)
- Composite (1)
- Concrete 3D-printing (1)
- Coniophora puteana (1)
- Corrosion mechanism (1)
- Coulomb explosion (1)
- CrMnFeCoNi (1)
- Crack propagation (1)
- Critical energy release rate (1)
- Crystal lattice (1)
- Crystal plasticity (1)
- Crystallization (1)
- Cubical shape (1)
- Defect detection (1)
- Density-based Model (1)
- Dentine (1)
- Design of experiment (1)
- Diffusion (1)
- Diffusivity (1)
- Dispersion process (1)
- Diversity (1)
- Ductile iron (1)
- EBSD (1)
- Electrochemical deposition (1)
- Electron beam-induced fragmentation (1)
- Electron diffraction (1)
- Electron microscopy (1)
- Enamel (1)
- Endurance Limit (1)
- Environmentally assisted cracking (1)
- Fatigue (1)
- Fluoride nanoparticles (1)
- Fluorolytic sol−gel (1)
- Fourier transform infrared spectroscopy (1)
- Fracture mechanics (1)
- Fracture surface energy (1)
- Fragility (1)
- Functional fatigue (1)
- Gas flow assisted powder deposition (1)
- General Chemistry (1)
- Geometrical factors (1)
- Glass fiber reinforced polymer (1)
- Glass liner (1)
- Glass powder (1)
- Grain boundary engineering (1)
- High Cycle Fatigue (1)
- High entropy alloy (1)
- Hot isostatic pressing (HIP) (1)
- Hybrid Manufacturing (1)
- Hydrogen permeation (1)
- Hydrogen storage tank (1)
- IR spectroscopy (1)
- Inconel 625 (1)
- Indentation hardness (1)
- Interface (1)
- Interfacial shear strength (1)
- Inverted classroom (1)
- Ionic porosity (1)
- Iron oxide (1)
- Kikuchi diffraction (1)
- Laser ablation in liquid (1)
- Laser-induced slip casting (1)
- Lattice misfit (1)
- Lattices (1)
- Lecture films (1)
- Lifetime prediction (1)
- Lithography-based technologies (1)
- Lorenz transmission electron microscopy (1)
- Martensitic steel (1)
- Mass transport (1)
- Materials Chemistry (1)
- Mechanical Engineering (1)
- Mechanics of Materials (1)
- Metals and Alloys (1)
- Microsegregation (1)
- Microstructure (1)
- Microstructure Design (1)
- Molecular Dynamics (1)
- Molecular dynamics (1)
- Nano CRM (1)
- Nano-ceramic-additive-manufacturing photoresin (1)
- Nano-powder (1)
- NanoCAM (1)
- Networking (1)
- Ni-Mn-Ga (1)
- Niobium alloying (1)
- Nucleation tendency (1)
- Particle morphology (1)
- Particle-bed binder jetting (1)
- Pattern matching (1)
- Permeability (1)
- Phase-field (1)
- Physical properties (1)
- Phytolith (1)
- Polyaniline (1)
- Polymer matrix composites (1)
- Polymer-ceramic mixtures (1)
- Porosity (1)
- Portfolio (1)
- Powder bed density (1)
- Powder-based processes (1)
- Powdered activated carbon (1)
- Process (1)
- Pull-out composite materials (1)
- Quality assurance (1)
- Raman spectroscopy (1)
- Reference nanoparticles (1)
- Resistance stress (1)
- Rhodonia placenta (1)
- Roughness (1)
- SAXS (1)
- SEM wood characterization (1)
- Scaffold (1)
- SchwarzP cells (1)
- Segregation Engineering (1)
- Sewage treatment plant (1)
- Shape-memory alloys (1)
- Single crystal superalloys (1)
- Sinter retardation (1)
- Sintering (1)
- Size (1)
- Sliding simulation (1)
- Slip-rolling (1)
- Slurry (1)
- Solubility (1)
- Space (1)
- Steels (1)
- Superelasticity (1)
- Superlattice extrinsic stacking faults (1)
- Surface (1)
- Surface-induced Melting (1)
- Technical Ceramics (1)
- Temperature (1)
- Thermo-mechanics (1)
- Thermoanalysis (1)
- Thermogravimetry (1)
- Thin tribofilm (1)
- Titanium oxide (1)
- Tooth wear (1)
- Transmission electron microscopy (1)
- Two-photon adsorption (1)
- Two-photon polymerization (1)
- Vacancies (1)
- Viscosity (1)
- Viscous sintering (1)
- Wood protection (1)
- Young’s Modulus (1)
- bioactive (1)
- biomaterials (1)
- bone (1)
- corrosion (1)
- high entropy alloys (1)
- hydrogen storage (1)
- oxidation (1)
- scanning electron microscopy (1)
- sulfidation (1)
Organisationseinheit der BAM
- 5 Werkstofftechnik (54) (entfernen)
During capture and storage technology (CCS) as well as in geothermal energy production Steels need to withstand the corrosive environment such as: heat, pressure, salinity of the aquifer and CO2-partial pressure. 1.4542 shows unusual corrosion phenomena, but is still sufficiently resistant in corrosive environments. To better understand its behaviour differently heat treated coupons of 1.4542 and for comparison X20Cr13 and X46Cr13 were kept in the artificial brine of the Northern German Basin at T=60 °C. Ambient pressure as well as p=100 bar for 700 h - 8000 h in water saturated supercritical CO2 and CO2-saturated synthetic aquifer Environment was applied. Fatigue tests were performed via push-pull tests with a series of 30 specimens from 150 MPa to 500 MPa (sinusoidal dynamic test loads, R=-1; resonant frequency ~ 30 Hz). FeCO3 and FeOOH are corrosion products also after dynamic corrosion tests. Martensitic microstructure offers good corrosion resistance in geothermal environment. The S-N-curve showing no typical fatigue strength and very steep slopes of possible fatigue strength for finite life. Possible influencing artefacts, such as Al-inclusions could not be correlated to early rupture despite specimens containing inclusions at the fracture surface and cross section reached lower number of cycles. Applied potential proofed to enhance fatigue life tremendously.
The current lack of quantitative knowledge on processing-microstructure–property relationships is one of the major bottlenecks in today’s rapidly expanding field of additive manufacturing. This is centrally rooted in the nature of the processing, leading to complex microstructural features. Experimentally-guided modeling can offer reliable solutions for the safe application of additively manufactured materials. In this work, we combine a set of systematic experiments and modeling to address creep anisotropy and its correlation with microstructural characteristics in laser-based powder bed fusion (PBF-LB/M) additively manufactured Inconel-738LC (IN738LC). Three sample orientations (with the tensile axis parallel, perpendicular, and 45° tilted, relative to the building direction) are crept at 850 °C, accompanied by electron backscatter secondary diffraction (EBSD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) investigations. A crystal plasticity (CP) model for Ni-base superalloys, capable of modeling different types of slip systems, is developed and combined with various polycrystalline representative volume elements (RVEs) built on the experimental measurements. Besides our experiments, we verify our modeling framework on electron beam powder bed fusion (PBF-EB/M) additively manufactured Inconel-738LC. The results of our simulations show that while the crystallographic texture alone cannot explain the observed creep anisotropy, the superlattice extrinsic stacking faults (SESF) and related microtwinning slip systems play major roles as active deformation mechanisms. We confirm this using TEM investigations, revealing evidence of SESFs in crept specimens. We also show that the elongated grain morphology can result in higher creep rates, especially in the specimens with a tilted tensile axis.
This paper investigates fast and inexpensive measurement methods for defect detection in parts produced by Additive Manufacturing (AM) with special focus on lattice parts made of ceramics. By Lithography-based Ceramic Manufacturing, parts were built both without defects and with typical defects intentionally introduced. These defects were investigated and confirmed by industrial X-ray Computed Tomography. Alternative inexpensive methods were applied afterwards on the parts such as weighing, volume determination by Archimedes method and gas permeability measurement. The results showed, that defects resulting in around 20% of change in volume and mass could be separated from parts free of defects by determination of mass or volume. Minor defects were not detectable as they were in the range of process-related fluctuations. Permeability measurement did not allow to safely identify parts with defects. The measurement methods investigated can be easily integrated in AM process chains to support quality control.
Degradation of AISI 630 exposed to CO2-saturated saline aquifer at ambient pressure and 100 bar
(2018)
In general high alloyed steels are suitable as pipe steels for carbon capture and storage technology (CCS), because they provide sufficient resistance against the corrosive environment of CO2-saturated saline aquifer which serves as potential CCS-site in Germany. High alloyed martensitic steel AISI 630 has been proven to be sufficient resistant in corrosive environments, e.g. regarding heat, pressure, salinity of the aquifer, CO2-partial pressure), but reveals a distinct corrosion pattern in CCS environment. Therefore coupons of AISI 630 heat treated using usual protocols were kept at T=60 °C and ambient pressure as well as p=100 bar up to 8000 h in an a) water saturated supercritical CO2 and b) CO2-saturated synthetic aquifer environment similar to on-shore CCS-sites in the Northern German Basin. AISI 630 precipitates a discontinuous ellipsoidal corrosion layer after being exposed for more than 4000 hours. Best corrosion resistance in the CO2-saturated synthetic aquifer environment phase is achieved via normalizing prior to exposure. In water saturated supercritical CO2 tempering at medium temperatures after hardening gives lowest corrosion rates. Corrosion fatigue via push-pull tests with a series of 30 specimens was evaluated at stress amplitudes between 150 MPa and 500 MPa (sinusoidal dynamic test loads, R=-1; resonant frequency ~ 30 Hz). The endurance limit of AISI 630 is reduced by more than 50% when exposed to CCS environment (maximum number of cycles (10 x 106) at a stress amplitude of 150 MPa).
Recently, additive manufacturing of ceramics has achieved the maturity to be transferred from scientific laboratories to industrial applications. At the same time, research is progressing to expand the boundaries of this field into the territory of novel materials and applications. This feature issue addresses current progress in all aspects of additive manufacturing of ceramics, from parts design to feedstock selection, from technological development to characterization of printed components.
Electrochemical deposition of polyaniline on carbon steel for corrosion study in geothermal solution
(2019)
Polyaniline has been widely developed for many applications, e.g. sensor, supercapacitor components, electrochromic devices, and anticorrosion pigments. Although the addition of polyaniline pigment in organic coatings has been an alternative for corrosion protection in industrial applications, the protection mechanism is still not fully understood. Herein in this study, as a part of the development of polyaniline/silicon dioxide coating for geothermal application, polyaniline has been deposited electrochemically on carbon steel surface in oxalic acid medium and tested in geothermal solution to understand the contribution of polyaniline to the corrosion protection of a polyaniline-based composite in the geothermal system. To observe the surface/interface reaction between the electrolyte and electrode surface during the electrochemical polymerization, electrochemical impedance spectroscopy (EIS) was applied after each cycle. For corrosion study in the geothermal application, an artificial geothermal solution was used with the composition of 1,500 mg/l Cl⁻, 20 mg/l SO₄²⁻, 15 mg/l HCO₃⁻, 200 mg/l Ca²⁺, 250 mg/l K⁺, and 600 mg/l Na⁺, and pH 4 to simulate a geothermal brine found in Sibayak, Indonesia. An electrochemical measurement was performed by monitoring the open circuit potential over seven days, with the interruption by EIS every 22 hours. The experiments were performed at room temperature and 150 °C (1 MPa) in an oxygen-free environment. Impedance spectra showed a reduction of the total impedance value of approximately 10 times for specimens measured at 150 °C compared to the specimens measured at room temperature, suggesting a less stable layer at high temperature.
A femto-second pulsed laser ablation in liquid (PLAL) procedure for the generation of titanium oxide nanoparticles (NP) is reported with the purpose of understanding morphology and structure of the newly generated NPs. Ablation duration was varied for optimization of NP generation processes between 10 and 90 min. Surface morphology of NPs as well as their size and shape (distribution) were analysed by various complementary electron microscopy techniques, i.e. SEM, TSEM and TEM. The crystalline structure of titanium oxide particles was investigated by XRD(two instruments operated in different geometries) and HR-TEM. Concentration of generated titanium oxide NPs in liquid was analysed by ICP-MS. A mix of crystalline (mainly anatase), partly crystalline and amorphous spherical titanium oxide NPs can be reported having a mean size between 10 and 20 nm, which is rather independent of the laser ablation (LA) duration. A second component consisting of irregularly shaped, but crystalline titanium oxide nanostructures is co-generated in the LA water, with more pronounced occurrence at longer LA times. The provenance of this component is assigned to those spherical particles generated in suspension and passing through the converging laser beam, being hence subject to secondary irradiation effects, e. g. fragmentation.
Methods and materials are presented here, which enable the manufacturing of fine structures using a 3D-printing method known as two-photon polymerization (2PP). As traditional photolithography methods for structuring ceramic slurries do not function with 2PP, due to light scattering on ceramic particles, a novel water-based photoresist with high ceramic loading of extremely well dispersed ceramic nano particles was developed. This photoresist is basically a ceramic slurry containing a photocurable agent and a photoinitiator to be crosslinkable with the 780 nm wavelength femtosecond laser light source of the 2PP machine. It is demonstrated that it is possible to gain a highly transparent and low viscous slurry suitable for 2PP processing. This work shows the development of the slurry, first printing results and the post-printing processes required to form three dimensional ceramic microstructures consisting of alumina toughened zirconia (ATZ).
The possibility of creating patient-specific individual implants makes Additive Manufacturing technologies of special interest for the medical sector. For substitution of bone defects, powder based Additive Manufacturing by Binder Jetting is a suitable method to produce complex scaffold-like structures made of bioceramics with easily adapted geometries and controlled porosity. The process inherent residual porosity in the printed part, even though desired as it supports bone ingrowth, also leads to limited mechanical strength. Currently, bioceramic scaffolds made by Binder Jetting feature suitable biocompatible and biodegradable properties, while a sufficient mechanical stability is rather challenging. The purpose of this work is to apply the gas flow assisted powder deposition introduced in 2014 by Zocca et al., to the powder bed during printing of bioceramic tablets and scaffolds using α-TCP powder as feedstock. This enables exploiting the advantages of an increased powder bed density, thereby improving the mechanical properties of the printed parts.
A giant Zn segregation transition is revealed using CALPHAD-integrated density-based modeling of segregation into Fe grain boundaries (GBs). The results show that above a threshold of only a few atomic percent Zn in the alloy, a substantial amount of up to 60 at.% Zn can segregate to the GB. We found that the amount of segregation abruptly increases with decreasing temperature, while the Zn content in the alloy required for triggering the segregation transition decreases. Direct evidence of the Zn segregation transition is obtained using high-resolution scanning transmission electron microscopy. Base on the model, we trace the origin of the segregation transition back to the low cohesive energy of Zn and a miscibility gap in Fe-Zn GB, arising from the magnetic ordering effect, which is confirmed by ab-initio calculations. We also show that the massive Zn segregation resulting from the segregation transition greatly assists with liquid wetting and reduces the work of separation along the GB. The current predictions suggest that control over Zn segregation, by both alloy design and optimizing the galvanization and welding processes, may offer preventive strategies against liquid metal embrittlement.