5 Werkstofftechnik
Filtern
Erscheinungsjahr
- 2020 (51) (entfernen)
Dokumenttyp
- Zeitschriftenartikel (51) (entfernen)
Sprache
- Englisch (50)
- Mehrsprachig (1)
Schlagworte
- EBSD (5)
- Additive manufacturing (4)
- Additive Manufacturing (3)
- High entropy alloys (3)
- Electron backscatter diffraction (2)
- Grain boundary (2)
- LPBF (2)
- LTCC (2)
- Orientation precision (2)
- Quasicrystal (2)
- Texture (2)
- Thermodynamics (2)
- X-ray diffraction (2)
- 2PP (1)
- 3D printing (1)
- 3D-printing (1)
- AISI 304L (1)
- AISI 316L (1)
- ATZ (1)
- Aggressive environments (1)
- Alkali aluminosilicate glasses (1)
- Alpha-tricalcium phosphate (1)
- Alumina (1)
- Alumina toughened zirconia (1)
- Angle measurement (1)
- Approximant (1)
- Atom probe tomography (1)
- Automated analysis (1)
- Bacterial attachment (1)
- Binder Jetting (1)
- Bio Ceramics (1)
- Bioactive glass scaffold (1)
- Bone marrow-derived mesenchymal stem cell (1)
- CCUS (1)
- CO2 pipeline transport (1)
- Carbon Fiber Reinforced Plastics (1)
- Carbon Fibre (1)
- Carbon steel (1)
- Cement-based materials (1)
- Ceramic nano particles (1)
- Ceramics (1)
- Chrystal orientation (1)
- Clay ISRU (1)
- Compositionally complex alloys (1)
- Computed Tomography (1)
- Confined catalyst (1)
- Cooling rate (1)
- Corrosion (1)
- Corrosion resistance (1)
- CrCoNi (1)
- CrMnFeCoNi (1)
- Crack evolution (1)
- Cracks (1)
- Cryogenic (1)
- Cryogenic cycling (1)
- Crystal growth velocity (1)
- Crystal orientation (1)
- DCB geometry (1)
- Data processing (1)
- Defect detection (1)
- Degradation (1)
- Degradation signatures (1)
- Densty-based Thermodynamics (1)
- Deuterium (1)
- Differential scanning calorimetry (1)
- Diffraction Enhanced Imaging (1)
- Diffusivity (1)
- Disorientation (1)
- Double notched creep specimen (1)
- EXAFS (1)
- Endothelial progenitor cell (1)
- Epoxy Resin (1)
- Fatigue (1)
- Fatigue striations (1)
- Fibre reinforced plastic (1)
- Fuel sorption (1)
- Gas flow assisted powder deposition (1)
- Glass (1)
- Glass ceramic (1)
- Glass transition (1)
- Gnomonic projections (1)
- Grain Boundary Segregation (1)
- Grain Boundary Spinodal (1)
- Granules (1)
- High - temperature (1)
- High density polyethylene (1)
- High entropy alloy (1)
- High temperature corrosion (1)
- High temperature oxidation (1)
- High-Entropy Alloys (1)
- Hot pressing (1)
- Hot stage microscopy (1)
- Hybrid Manufacturing (1)
- Hydrogen (1)
- Hydrous glass (1)
- Impurities (1)
- In situ tensile test (1)
- In-situ ED-XRD (1)
- Inconel 686 (1)
- Inconel 718 (1)
- Indentation fracture toughness (1)
- Infrared spectroscopy (1)
- Interfacial strength (1)
- Internal friction (1)
- Ionic porosity (1)
- Iron (1)
- Kernel average misorientation (1)
- Kikuchi diffraction (1)
- Kikuchi patterns (1)
- LIBS (1)
- Laser Powder Bed Fusion (1)
- Laser cladding (1)
- Lattice rotation (1)
- Lattices (1)
- Layered manganese oxide (1)
- Layerwise Slurry Deposition (1)
- Low expansion (1)
- Low-loading (1)
- Lunar regolith (1)
- MGS-1 regolith simulant (1)
- Mars (1)
- Matrix residual stress (1)
- Mechanical properties (1)
- Medium entropy alloys (1)
- Melting (1)
- Metal and alloys (1)
- Metallic glass (1)
- Microstrucrue Design (1)
- Microstructure (1)
- Mixed conductors (1)
- Mn-oxides (1)
- Multilayer ceramic technology (1)
- NMR spectroscopy (1)
- Nano-ceramic-additive-manufacturing photoresin (1)
- NanoCAM (1)
- Nanoparticles (1)
- Nb3Sn (1)
- Neutron Diffraction (1)
- Non-serrated inhomogeneous flow (1)
- Online Process Monitoring (1)
- Oxyfuel (1)
- Oxygen evolution reaction (1)
- Packaging (1)
- Particle size (1)
- Pattern matching (1)
- Permeability (1)
- Permittivity reduction (1)
- Phase Diagram (1)
- Phase transformation (1)
- Phase transformations (1)
- Plasma imaging (1)
- Polyethylene (1)
- Polymer analysis/characterization (1)
- Polyolefins (1)
- Porosification (1)
- Powder diffraction (1)
- Projection center (1)
- Quality assurance (1)
- Reaction Sintering (1)
- Rejuvenation (1)
- Relaxation (1)
- Residual Stress (1)
- Residual stress (1)
- SEM (1)
- Scaffold (1)
- Scanning electron microscopy (1)
- SchwarzP cells (1)
- Schwingstreifen (1)
- Shadowgraphy (1)
- Single crystal (1)
- Single crystal Ni-Base superalloys (1)
- Sintering (1)
- Slow crack growth (1)
- Slurry (1)
- Smectite (1)
- Soda-lime silicate glass (1)
- Solubility (1)
- Split-vacancy defect complexes (1)
- Spray drying (1)
- Stable crack growth (1)
- Stress distribution (1)
- Stress intensity factor (1)
- Structural dynamics (1)
- Synchrotron micro-tomography (1)
- TEM (1)
- Thermal cycling (1)
- Thermal desorption mass spectrometry (1)
- Thermoelectric properties (1)
- Thermography (1)
- Thermoplastic prepreg (1)
- Thermoset composition (1)
- Three-dimensional Bone tissue engineering (1)
- ToF-SIMS (1)
- Transformer (1)
- Transmission electron microscopy (1)
- Transmission electron microscopy (TEM) (1)
- Two-photon polymerization (1)
- UV-irradiation (1)
- Ultrasound (1)
- Unidirectional composites (1)
- Vickers indentation (1)
- Volatiles from thermosets (1)
- Volume changes (1)
- Water content (1)
- Water speciation (1)
- Wet chemical etching (1)
- X-ray Diffraction (1)
- X-ray absorption spectroscopy (1)
- X-ray refraction (1)
- Zirconia (1)
- Zirconia-toughened alumina (1)
- hydrogen storage (1)
Organisationseinheit der BAM
- 5 Werkstofftechnik (51)
- 5.1 Mikrostruktur Design und Degradation (19)
- 5.4 Multimateriale Fertigungsprozesse (13)
- 6 Materialchemie (7)
- 5.3 Polymere Verbundwerkstoffe (6)
- 5.6 Glas (6)
- 5.0 Abteilungsleitung und andere (5)
- 7 Bauwerkssicherheit (4)
- 8 Zerstörungsfreie Prüfung (4)
- 5.2 Metallische Hochtemperaturwerkstoffe (3)
Paper des Monats
- ja (1)
An extensive set of information about the diffracting volume is carried by EBSD patterns: the crystal lattice, the reciprocal lattice, the crystal structure, the crystal symmetry, the mean periodic number of the diffracting phase, the source point from where it has been projected (projection centre), the crystal orientation, the sample topography (local tilt), the (preparation) quality of defect density of the crystal, and possible pattern overlaps. Some of this information is used regularly in conventional EBSD analyses software while others are still waiting for a more widespread application. Despite the wealth of information available, the accuracy and precision of the data that are presently extracted from conventional EBSD patterns are often well below the actual physical limits. Using a selection of example applications, we will demonstrate the gain in angular resolution possible using relatively low-resolution patterns of approximately 20k pixels in combination with pattern matching (PM) approaches. In this way, fine details in a microstructure can be revealed which would otherwise be hidden in the orientation noise.
Calcium alkali metal (potassium and sodium) double and triple phosphates have been synthesized in different ways. Was for the first time used reaction sintering to produce ceramics based on calcium alkali metal mixed phosphates and investigated the densification behavior of mixed phosphate-based multiphase materials during sintering by this method. Was presented the microstructure of polished surfaces of sintered samples differing in phase composition and determined the density of ceramics prepared using reaction mixtures differing in composition. The effect of reaction sintering on the porosity of the ceramics has been assessed. Using stereolithographic printing and reaction sintering, was produced macroporous mixed Calcium phosphate-based ceramic implants. Their compressive strength has been determined to be 0.78 ± 0.21 MPa for two-phase samples and 1.02 ± 0.13 MPa for three-phase samples.
Fatigue failure of a component can occur at service loads considerably lower than the yield strength of the material. Under fatigue loading condition, the material in the vicinity of the tip of a propagating crack repeatedly deforms plastically, leaving microscopic marks on the crack surface, commonly known as fatigue striations. Counting and measuring fatigue striations is a method in estimating the number of loading cycles a component went through until fracture. Some studies suggest a one-to-one relation between the number of fatigue striations and the number of load cycles, but this relation is still debatable, given that there are many factors influencing the formation of those striations. The main purpose of this work is to analyze the influence of microstructure and mechanical strength on the formation of fatigue striations in structural steels, in order to understand how these material properties are related to the fatigue crack behavior. For such, standard Charpy-V samples were subjected to hardness, fatigue and impact testing. Metallography was performed to characterize the microstructure, and a fractographic analysis by using optical and scanning electron microscopy was carried out to investigate the fracture surface. This study shows that steels with higher ductility have a closer one-to-one relation than those with a higher tensile strength. Above a certain level of tensile strength, fatigue striations do form rarely or completely disappear.
Segregation to grain boundaries affects their cohesion, corrosion, and embrittlement and plays a critical role in heterogeneous nucleation. In order to quantitatively study segregation and low-dimensional phase separation at grain boundaries, here, we apply a density-based phase-field model. The current model describes the grain-boundary thermodynamic properties based on available bulk thermodynamic data, while the grain-boundary-density profile is obtained using atomistic simulations. To benchmark the performance of the model, Mn grain-boundary segregation in the Fe–Mn system is studied. 3D simulation results are compared against atom probe tomography measurements conducted for three alloy compositions. We show that a continuous increase in the alloy composition results in a discontinuous jump in the segregation isotherm. The jump corresponds to a spinodal Phase separation at grain boundary. For alloy compositions above the jump, we reveal an interfacial transient spinodal phase separation.
The transient spinodal phenomenon opens opportunities for knowledge-based microstructure design through the chemical manipulation of grain boundaries. The proposed density-based model provides a powerful tool to study thermodynamics and kinetics of segregation and phase changes at grain boundaries.
The wireless high-frequency technology requires a robust, cost-effective, and highly integrated substrate technology offering the capability for areas of tailored permittivity. The wet-chemical porosification of low temperature co-fired ceramics (LTCC) substrates offers such an approach by locally embedding air. Porosification of LTCC in both extremely acidic and alkaline media has been investigated in previous works. However, for improving the available knowledge on the porosification of LTCC with H3PO4 as a standard and a widely used etching solution, the impact of solution concentration was systematically investigated and a substantial improvement in the etching performance was achieved. Moreover, in the present study, for the first time, the intermediate pH values, and the impact of pH as a key parameter on the etching process have been investigated. For this purpose, the applicability of phosphate buffer solution (PBS) as a prospective novel etchant mixture for the porosification of a commercially available LTCC tape (Ceramtape GC) was explored. Valuable information about surface morphology, crystalline composition, and the pore structure of the etched LTCCs was gathered employing scanning electron microscopy, transmission electron microscopy, X-ray diffraction analysis, and mercury porosimetry measurements. Based on these findings, the performance of PBS-based etchant systems towards the generation of porous LTCCs combining high depths of porosification with acceptable surface characteristics for subsequent metallization is demonstrated. Based on the obtained results, by application of a 0.2 mol L−1 solution of PBS, the effective relative permittivity of test samples with a thickness of approximately 600 µm and a porosification depth of 186 µm from each side, could be reduced up to 10% of its initial “as fired” value. Also, based on the measurement results and by measuring the depth of porosification, the permittivity of the etched layer was estimated to show a reduction of up to 22% compared to the initial “as fired” value.
Surface degradation phenomena of two model equiatomic alloys from the CrMnFeCoNi alloy system were investigated in 2% O2 and 10% H2O (pO2 = 0.02 and 10−7 atm, respectively) at 800 °C for times up to 96 h. The crystallographic structures, morphologies, and chemical compositions of the corrosion layers developing on CrMnFeCoNi and CrCoNi were comparatively analyzed by mass gain analysis, X-ray diffraction, and scanning electron microscopy combined with energy-dispersive X-ray spectroscopy and electron backscatter diffraction. The oxidation resistance of CrMnFeCoNi is relatively poor due to the fast growth of porous Mnoxide(s). CrCoNi forms an external chromia layer that is dense and continuous in a dry 2% O2 atmosphere. This layer buckles and spalls off after exposure to 10% H2O atmosphere. Beneath the chromia layer, a Cr-depleted zone forms in the CrCoNi alloy in both environments. As the oxide scale spalls off in the H2O-containing
atmosphere, a secondary chromia layer was observed and correspondingly enlarges the Cr-depleted zone. In contrast, as the chromia layer remains without significant spallation when CrCoNi is exposed to a dry oxidizing atmosphere, the region depleted in Cr is narrower.
Methods and materials are presented here, which enable the manufacturing of fine structures using a 3D-printing method known as two-photon polymerization (2PP). As traditional photolithography methods for structuring ceramic slurries do not function with 2PP, due to light scattering on ceramic particles, a novel water-based photoresist with high ceramic loading of extremely well dispersed ceramic nano particles was developed. This photoresist is basically a ceramic slurry containing a photocurable agent and a photoinitiator to be crosslinkable with the 780 nm wavelength femtosecond laser light source of the 2PP machine. It is demonstrated that it is possible to gain a highly transparent and low viscous slurry suitable for 2PP processing. This work shows the development of the slurry, first printing results and the post-printing processes required to form three dimensional ceramic microstructures consisting of alumina toughened zirconia (ATZ).
Calcium cobaltite Ca3Co4O9, abbreviated Co349, is a promising thermoelectric material for high‐temperature applications in air. Its anisotropic properties can be assigned to polycrystalline parts by texturing. Tape casting and pressure‐assisted sintering (PAS) are a possible future way for a cost‐effective mass‐production of thermoelectric generators. This study examines the influence of pressure and dwell time during PAS at 900°C of tape‐cast Co349 on texture and thermoelectric properties. Tape casting aligns lentoid Co349. PAS results in a textured Co349 microstructure with the thermoelectrically favorable ab‐direction perpendicular to the pressing direction. By pressure variation during sintering, the microstructure of Co349 can be tailored either toward a maximum figure of merit as required for energy harvesting or toward a maximum power factor as required for energy harvesting. Moderate pressure of 2.5 MPa results in 25% porosity and a textured microstructure with a figure of merit of 0.13 at 700°C, two times higher than the dry‐pressed, pressureless‐sintered reference. A pressure of 7.5 MPa leads to 94% density and a high power factor of 326 µW/mK2 at 800°C, which is 11 times higher than the dry‐pressed reference (30 MPa) from the same powder.
One of the most ubiquitous and important defects in solids is oxygen. Knowledge about the solubility and diffusivity of oxygen in materials is crucial to understand a number of important technological processes, such as oxidation, corrosion, and heterogeneous catalysis. Density-functional theory calculations of the thermodynamics and kinetics of oxygen in cobalt show that oxygen diffusing into the two close-packed phases, namely α (hcp) and β (fcc), strongly interacts with vacancies.We observe the formation of oxygen split-vacancy centers (V-Oi-V) in both phases, and we show that this defect complex exhibits a similar migration energy barrier to the vacancy and oxygen interstitials. In contrast to the vacancy and oxygen interstitials, the oxygen split-vacancy centers exhibit an anisotropic strain field that couples to applied stress, making it possible to observe them through an internal friction experiment on quenched cobalt.
Modern air-liners and wind turbine rotor blades are made up primarily of fiber reinforced plastics. Failure of these materials heavily impairs the serviceability and the operational safety. Consequently, knowledge of the failure behavior under static and cyclic loads is of great interest to estimate the operational strength and to compare the performance of different materials. Ideally, the damage evolution under operational load is determined with in situ non-destructive testing techniques. Here, we report in-situ synchrotron X-ray imaging of tensile stress induced cracks in carbon fiber reinforced plastics due to inter-fiber failure. An inhouse designed compact tensile testing machine with a load range up to 15 kN was integrated into the beamline. Since conventional radiographs do not reveal sufficient contrast to distinguish cracks due to inter-fiber failure and micro cracking from fiber bundles, the Diffraction Enhanced Imaging (DEI) technique is applied in order to separate primary and scattered (refracted) radiation by means of an analyzer crystal. This technique allows fast measurements over large fields-of-view and is ideal for in-situ investigations. Imaging and the tensile test are run at the highest possible frame rate (0.7 s-1 ) and the lowest possible strain rate (5.5∙10-4 s -1 ). For 0°/90° non-crimp fabrics, the first inter-fiber cracks occur at 380 MPa (strain 0.8 %). Prior to failure at about 760 MPa (strain 2.0 %), we observe the evolution of nearly equidistant (1 mm distance) cracks running across the entire sample in the fully damaged state.