5 Werkstofftechnik
Filtern
Dokumenttyp
- Vortrag (16)
- Zeitschriftenartikel (14)
- Posterpräsentation (3)
- Buchkapitel (1)
- Beitrag zu einem Tagungsband (1)
Schlagworte
- Ceramics (9)
- Alumina (5)
- NTE (4)
- Ab-initio (3)
- Calcination (3)
- Dielectric breakdown (3)
- Dielectric strength (3)
- Keramik (3)
- Pressure-assisted sintering (3)
- Sol-gel (3)
- Solid-state (3)
- TDEP (3)
- Zirconia (3)
- Biaxial strength (2)
- Calcium cobaltite (2)
- Hard machining (2)
- LTCC (2)
- Reaction-sintering (2)
- Spray drying (2)
- Thermoelectric oxide (2)
- Thermoelectric properties (2)
- 3D materialography (1)
- Breakdown strength (1)
- Calcium Cobaltite (1)
- Ceramic (1)
- Ceramic spring (1)
- Composites (1)
- Creep (1)
- Dental (1)
- Destabilization (1)
- Dielectric breakdown strength (1)
- Durchschlagfestigkeit (1)
- Elastic properties (1)
- Electric field distribution (1)
- Electric field strength (1)
- Electrical insulators (1)
- Electronic (1)
- Faseroptik (1)
- Federkonstante (1)
- Festigkeit (1)
- Fracture toughness (1)
- Gassensorik (1)
- Glass-ceramics (1)
- Granules (1)
- H2Safety@BAM (1)
- Hartbearbeitung (1)
- High-voltage testing (1)
- Hochspannungsprüfung (1)
- Hot pressing (1)
- Implants (1)
- Liquid phase sintering (1)
- Machine Learning (1)
- Metrologie (1)
- Multilayer (1)
- Multilayer technology (1)
- Multilayers (1)
- Optical and Magnetic Materials (1)
- Optical centrifugation (1)
- Permittivity reduction (1)
- Porosification (1)
- Power factor (1)
- Power law (1)
- Pressure assisted sintering (1)
- Sintering additive (1)
- Sintermechanismen (1)
- Slurry optimization (1)
- Solid-State-Synthesis (1)
- Solid-state-synthesis (1)
- Spring constant (1)
- Spring constant (1)
- Synchrotron CT (1)
- Synchrotron Tomography (1)
- TEM (1)
- Technische Keramik (1)
- Texture (1)
- Thermal expansion (1)
- Thermoelectric generator (1)
- Thermoelectric oxides (1)
- Thermoelectrics (1)
- Ultraschall (1)
- Ultrasound (1)
- Weibull distribution (1)
- Wet chemical etching (1)
- Withstand voltage tests (1)
- X-ray-diffraction (1)
- Zerstörungsfreie Prüfung (1)
- Zirconia-toughened alumina (1)
- alumina (1)
- ceramics (1)
- volume resistivity (1)
- zertifizierte Referenzmaterialien (1)
- Überblick (1)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (16)
The sintering behavior and the thermoelectric performance of Ca3Co4O9 multilayer laminates were studied, and a multilayer thermoelectric generator was fabricated. Compacts and multilayer samples with anisotropic microstructure and residual porosity were obtained after conventional sintering at 920 °C, whereas dense and isotropic multilayer samples were prepared by firing at 1200 °C and reoxidation at 900 °C. A hot-pressed sample has a dense and anisotropic microstructure. Samples sintered at 920 °C exhibit low electrical conductivity due to the low density, whereas the Seebeck coefficient is not sensitive to preparation conditions. However, thermal conductivity of multilayers is very low, and, hence acceptable ZT values are obtained. A ransversal multilayer thermoelectric generator (TMLTEG) was fabricated by stacking layers of Ca3Co4O9 green tapes, AgPd conductor printing, and co-firing at 920 °C. The TMLTEG has a power output of 3 mW at ΔT =200 K in the temperature interval of 25 °C to 300 °C.
Dielectric strength testing of ceramics is simple and yet challenging. The execution of a breakthrough voltage measurement of a given sample is fast and straightforward. ASTM D149 describes the standardized procedure. But, there are versatile effects of test conditions and sample properties that affect the result of such a measurement. As one example, ASTM D149 allows different sizes of test electrodes and does not unambiguously prescribe the condition of the electrodes. Thus, different electrode configurations are used in the field. We conducted several test series on alumina samples to comprehensively quantify the effect of test conditions and sample properties on dielectric strength results. In our study, testing of alumina substrates using different electrode configurations resulted in differences of mean values of up to 20%. Further test series on alumina focused on the effect of voltage ramp rate. The results are complemented by calculations of failure probability at different voltage levels and corresponding withstand voltage tests. We conclude that a communication and comparison of single dielectric strength values is insufficient and may be misleading. A meaningful comparison of dielectric strength studies from different sources requires a thorough consideration of test conditions.
Sintern
(2018)
Unter Sintern versteht man allgemein die Überführung eines aus Pulver geformten Rohlings in ein Formteil mit angestrebter Mikrostruktur bzw. gewünschten Gebrauchseigenschaften durch thermische Prozesse. In diesem Kapitel werden die Grundlagen zu Triebkräften und Kinetik sowie die prinzipiellen Mechanismen für Stofftransport und Verdichtung vorgestellt. Die verschiedenen Sintermechanismen Festphasensintern, Flüssigphasensintern und Reaktionssintern werden erläutert und mit einem Überblick über Drucksinterverfahren ergänzt. Abschließend wird ein Überblick über technologische Einflussfaktoren auf die Sinterung gegeben.
A wide range of solid-state synthesis routes for calcium manganate is reported in the literature, but there is no systematic study about the influence of the solid-state synthesis conditions on thermoelectric properties. Therefore, this study examined the influence of calcination temperature and calcination cycles on the Seebeck coefficient, electrical conductivity, and thermal conductivity. Higher calcination temperatures and repeated calcination cycles minimized the driving force for sintering of the synthesized powder, leading to smaller shrinkage and lower densities of the sintered specimens. As the electrical conductivity increased monotonously with increasing density, a higher energy input during calcination caused deterioration of electrical conductivity. Phase composition and Seebeck coefficient of sintered calcium manganate were not influenced by the calcination procedure. The highest thermoelectric properties with the highest power factors and figures of merit were obtained by means of reaction-sintering of uncalcined powder.
The granules commonly yielded by spray drying procedures exhibit a hard shell and an irregular, dimpled shape, which is often described as donut-like morphology. Sintered parts produced from such granules suffer from microstructural defects and reduced mechanical properties resulting from these disadvantageous granule properties.
Using the example of alumina, zirconia and zirconia-toughened alumina (ZTA) batches, this paper shows that the morphology of the granules can be tuned by adjusting slurry stability. High zeta potential is essential to optimally disperse the particles. But to achieve spherical and soft granules the electrostatic repulsion forces between the particles should be reduced before spray granulation. Electrostatic repulsion forces were changed with the addition of nitric acid. Measurements of zeta potential and viscosity, as well as sedimentation investigations with an optical centrifuge were used for precise slurry assessment as a major precondition for optimal and reproducible adjustment of slurries before spray drying. Sedimentation analysis using an optical centrifuge was performed to investigate different influences like that of additive composition, solids content or pH-value on the sedimentation behavior. Adequately flocculated slurries lead to homogeneous, soft granules that can be easily deformed and pressed. The fraction of donut-shaped particles and the rigidity of granules were reduced. Consequently, the sintered parts produced from these granulates show improvements regarding porosity, pore size distribution, sintered density and biaxial strength.