Filtern
Erscheinungsjahr
Dokumenttyp
Schlagworte
- Kolbenring (3)
- Thermal spraying (3)
- Zylinderlaufbahn (3)
- (Ti,Mo)(C,N) (2)
- AlSi (2)
- Cr2O3 (2)
- Cylinder liner (2)
- Dry sliding (2)
- Lubrication (2)
- Magnéli-Phasen (2)
Organisationseinheit der BAM
Thermally sprayed TiO2-x coatings under mixed lubrication and unlubricated sliding conditions
(2004)
Wear tests are often used in engine development in order to characterize the functional profile of surfaces interacting with lubricants. This paper proposes a new test procedure to determine Stribeck-type curves for the tribosystem piston ring/cylinder liner involving test pieces prepared from engine components. The variation of the friction coefficient with sliding speed depends on the structure and constitution of the base oil, the viscosity index, the surface topography of the liner and ring, and the friction modifiers used. Novel organic friction modifiers of low molecular mass not only reduce the friction coefficients under mixed / boundary lubrication, but also in the fluid film regime. In addition, the influence of surface roughness on the wettability of surfaces can be significant for both static and dynamic wetting. For this reason, the interaction of the lubricant with the surfaces was also investigated to enable a correlation between the surface properties of the liquid and solid phases and the tribological behavior.
Einen großen Beitrag zur Gewichtseinsparung leistet die Substitution von Grauguss-Legierungen durch moderne Aluminiumlegierungen für Pkw Kurbelgehäuse. Zur Erhöhung der tribologischen und thermomechanischen Belastungsgrenzen von Aluminiumoberflächen kommen thermisch gespritzte Schichten in Frage. Zielsetzung nachfolgender Untersuchungen ist es außermotorisch unter Misch-/Grenzreibung das tribologische Potenzial von thermisch gespritzten keramischen Schichtwerkstoffen auf Basis der Stoffsysteme Cr2O3, Cr2O3/TiO2, Cr3C2/NiCr, TiO2, TiO2/Al2O3 im Vergleich zu aktuell serienmäßig eingesetzten Graugusswerkstoffen zu ermitteln. Die Oberflächentopographien und die Schmierstoffe determinieren gegenüber GG26Cr die Verschleißsenkungspotenziale der keramischen Schichten. Eine Reduzierung der Reibungszahlen wird nicht durch keramische Oberflächenbeschichtungen, sondern durch den Einsatz von Polyglykolen als Schmiermedium erzielt.
Wear tests are often used in engine development in order to characterize the functional profile of surfaces interacting with lubricants. This paper proposes a new test procedure to determine Stribeck-type curves for the tribosystem piston ring/cylinder liner involving test pieces prepared from engine components. The Variation of the friction coefficient with sliding speed depends on the structure and Constitution of the base oil, the viscosity index, the surface topography of the liner and ring, and the friction modifiers used. Novel organic friction modifiers of low molecular mass not only reduce the friction coefficients under mixed / boundary lubrication, but also in the fluid film regime. In addition, the influence of surface roughness on the wettability of surfaces can be significant for both static and dynamic wetting. For this reason, the interaction of the lubricant with the surfaces was also investigated to enable a correlation between the surface properties of the liquid and solid phases and the tribological behavior.