Filtern
Erscheinungsjahr
- 2015 (2) (entfernen)
Dokumenttyp
Sprache
- Englisch (2)
Referierte Publikation
- ja (2) (entfernen)
Schlagworte
- Dangerous goods packagings (2)
- Gauge pressure (2)
- Gefahrgutverpackungen (2)
- Überdruck (2)
- Data loggers (1)
- Datenlogger (1)
- Dichtheit (1)
- Frachtcontainer (1)
- Leak testing (1)
- Leakage rate (1)
- Leakproofness (1)
- Leckagerate (1)
- Lower explosion limit (1)
- Normal conditions of carriage (1)
- Normale Beförderungsbedingungen (1)
- Overpressure (1)
- Relative Ausdehnung (1)
- Relative expansion (1)
- Untere Explosionsgrenze (1)
The objective was to find out whether an explosive atmosphere can be created in a freight container by gaseous leakage flow of vapour-air-mixture through leaks in the closures of dangerous goods packagings filled with hazardous liquids. Because of high temperatures during intercontinental carriage, there is a gauge pressure in the free vapour phase inside the packagings which can cause a gaseous leakage flow. Two different methods were applied:
Helium limit leakage rates for 23 quantitatively important hazardous liquids concerning their lower explosion limit (LEL) were calculated for a worst case transport scenario (Method 1).
Helium leakage rates of five closure types of dangerous goods packagings with volumes of approximately 6 l were measured using the pressure technique by accumulation (Method 2).
All types of closures of steel packagings were uncritical. The maximum measured leakage was 33% of the limit leakage rate. The leakage rates of screw closures of plastic jerricans can exceed the LEL if there are production-related patterns such as non-concentricity of the closures and flashes on the neck. Especially for plastic packagings it is important to minimize gaseous leakage flow, because an explosive atmosphere can also be reached by permeation of the individual filling substance or by a combination of both effects. For the assessment of potentially explosive mixtures in freight containers, both mass transfer mechanisms have to be taken into account.
The objective of this work was to determine the maximum gauge pressure in the vapour phase above the liquid in different design types of dangerous goods packagings under normal conditions of carriage. The design types investigated were steel and plastic packagings with a volume of approximately 6 l.
Two different methods were applied. In method 1, the pressure inside the packaging filled with a certain filling substance (dichloromethane) was directly measured under simulated conditions of carriage (degree of filling: 90%; filling temperature: 15°C; temperature during storage: 31°C). The maximum measured gauge pressures were between 89 mbar for a light plastic jerrican and 336 mbar for a steel drum.
In method 2, the gauge pressure was calculated. The consideration of a rigid packaging combined with the assumption of a vapour pressure of zero during filling and sealing can serve as a worst case scenario. The calculated gauge pressure is approximately 1061 mbar. This procedure leads to the highest safety factor and does not require any experimental investigations.
For a more realistic approximation of the gauge pressure of a non-rigid packaging, a packaging-specific function of relative expansion can be used, which is determined by a hydraulic pressure test. The calculated values ranged from 105 to 347 mbar. Method 2 provides conservative results. No hazardous filling substance is needed, and it allows a prediction of gauge pressure for other temperatures, substances and filling degrees. Therefore, this method could serve as alternative to UN Model Regulations 6.1.5.5.4 (a).