Filtern
Erscheinungsjahr
Dokumenttyp
Sprache
- Englisch (56) (entfernen)
Schlagworte
- Drop test (8)
- Transport (6)
- Mechanische Bewertung (5)
- Numerische Analyse (5)
- Radioactive material (5)
- Radioaktives Material (5)
- Ageing (4)
- Dual purpose casks (4)
- Impact limiter (4)
- Spent nuclear fuel (4)
- Drop tests (3)
- Dual purpose cask (3)
- Mechanik (3)
- Package design (3)
- Radioaktive Stoffe (3)
- Safety assessment (3)
- Spent fuel transport cask (3)
- Transport package (3)
- Ageing Management (2)
- Aging (2)
- Aging mechanisms (2)
- Assessment (2)
- Assessment method (2)
- Buckling (2)
- Corrosion (2)
- Dual Purpose Casks (2)
- Ductile cast iron (2)
- Experimental testing (2)
- Fracture initiation (2)
- Gefahrgut (2)
- Großkomponenten (2)
- Interim storage (2)
- Kerntechnische Anlagen (2)
- Metal seals (2)
- Numerical modelling (2)
- Package (2)
- Rückbau (2)
- Stability (2)
- Steel (2)
- Transport Packages (2)
- Transport packages (2)
- Transportation (2)
- Wood (2)
- Ageing mechanisms (1)
- Aging management (1)
- Aluminium (1)
- Antragsverfahren (1)
- Approval certificate (1)
- Approved packages (1)
- BAM-GGR 023 (1)
- Basket design (1)
- Beförderung (1)
- Bruchmechanik (1)
- Cask (1)
- Cesium corrosion (1)
- Closure system (1)
- Containment (1)
- Cylindrical shell (1)
- Cylindrical shells (1)
- Decommissioning (1)
- Design approval (1)
- Design assessment (1)
- Design assessment of RAM packages (1)
- Drop test program (1)
- Drop test results (1)
- Drop testing (1)
- Dual Purpose Cask (1)
- Dynamic simulation (1)
- Dynamics (1)
- Encapsulations for damaged spent nuclear fuel (1)
- European Guide (1)
- Experimental test (1)
- Finite Element Analysis (1)
- Finite element calculation (1)
- Gap analysis (1)
- Guidance material (1)
- Guide (1)
- Half scale model (1)
- High-level waste (1)
- IAEA (1)
- IAEA drop testing (1)
- Internal shock absorber (1)
- Large components (1)
- Large objects (1)
- Long time storage (1)
- Longitudinal stiffeners (1)
- Longiudinal stiffeners (1)
- Management (1)
- Management system (1)
- Material (1)
- Measurement methods (1)
- Measurement procedure (1)
- Mechanical assessment (1)
- Mechanical tests (1)
- Mechanism (1)
- Metal seals reliability (1)
- New package design (1)
- Nuclear power plant (1)
- Numerical analysis (1)
- Numerical calculations (1)
- Package assessment (1)
- Package testing (1)
- Package types (1)
- Packaging (1)
- Periodical Review (1)
- Periodical review (1)
- Periodoc inspection (1)
- Quality Management (1)
- Quality assurance (1)
- Quality management system (1)
- Qualitätsüberwachung (1)
- Radioactiv material (1)
- Radioactive Materials (1)
- Radioactive materials (1)
- Rückbau kerntechnischer Anlagen (1)
- SCO-III (1)
- SNF (1)
- SSR-6 (1)
- Safety (1)
- Safety Analysis (1)
- Safety report (1)
- Sealed sources (1)
- Special encapsulation (1)
- Special form radioactive material (1)
- Spent fuel (1)
- Spent fuel assemblies (1)
- Spent fuel/high-level waste (1)
- Storage (1)
- Strahlenschutz (1)
- Structural analysis (1)
- Thermal Design (1)
- Thermal tests (1)
- Thermik (1)
- Transport and storage casks (1)
- Transport and storage casks for spent nuclear fuel or high level waste (1)
- Transport conditions (1)
- Transport of radaioactive materials (1)
- Transportability (1)
- Transportation of radioactive materials (1)
- Transportbehälter (1)
- Ttransport (1)
- Typ B(U)-Verpackung (1)
- Typ-B Versandstück (1)
- Zulassung (1)
- Zulassungen (1)
- radioaktives Material (1)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (9)
The majority of transports of radioactive materials are carried out in packages which don’t need a package design approval by a competent authority. Low-active radioactive materials are transported in such packages e.g. in the medical and pharmaceutical industry and in the nuclear industry as well. Decommissioning of NPP’s leads to a strong demand for packages to transport low and middle active radioactive waste. According to IAEA regulations the “non-competent authority approved package types” are the Excepted Packages and the Industrial Packages of Type IP-1, IP-2 and IP-3 and packages of Type A. For these types of packages an assessment by the competent authority is required for the quality assurance measures for the design, manufacture, testing, documentation, use, maintenance and inspection (IAEA SSR 6, § 306). In general a compliance audit of the manufacturer of the packaging is required during this assessment procedure. Their regulatory level in the IAEA regulations is not comparable with the “regulatory density” for packages requiring competent authority package design approval. Practices in different countries lead to different approaches within the assessment of the quality assurance measures in the management system as well as in the quality assurance program of a special package design. To use the package or packaging in a safe manner and in compliance with the regulations a management system for each phase of the life of the package or packaging is necessary. The relevant IAEA-SSR6 § 801 requires documentary verification by the consignor concerning package compliance with the requirements.
Transport of large nuclear power plant components: experiences in mechanical design assessment
(2009)
In the course of decommissioning of power plants in Germany large nuclear components (steam generator, reactor pressure vessel) must be transported over public traffic routes to interim storage facilities, where they are dismantled or stored temporarily. Since it concerns surface contaminated objects or low specific activity materials, a safety evaluation considering the IAEA transport regulations mainly for industrial packages (type IP-2) is necessary. For these types of industrial packages the requirements from normal transport conditions are to be covered for the mechanical proof. For example, a free drop of the package from a defined height, in dependence of its mass, onto an unyielding target, and a stacking test are required. Since physical drop tests are impossible generally due to the singularity of such 'packages', a calculation has to be performed, preferably by a complex numerical analysis. The assessment of the loads takes place on the basis of local stress distributions, also with consideration of radiation induced brittleness of the material and with consideration of recent scientific investigation results. Large nuclear components have typically been transported in an unpackaged manner, so that the external shell of the component provides the packaging wall. The investigation must consider the entire component including all penetration areas such as manholes or nozzles. According to the present IAEA regulations the drop position is to be examined, which causes the maximum damage to the package. In the case of a transport under special arrangement a drop only in an attitude representing the usual handling position (administratively controlled) is necessary. If dose rate values of the package are higher than maximum allowable values for a public transport, then it is necessary that additional shielding construction units are attached to the large component.
Transport of large nuclear power plant components - experiences in mechanical design assessment
(2010)
Transport of large nuclear power plant components - experiences in mechanical design assessment
(2009)
For disposal of the German research reactor of the Technical University Munich FRM II a new transport and storage cask design was under approval assessment by the German authorities. The Bundesanstalt für Materialforschung und -prüfung (BAM) assessed the mechanical and thermal package safety and performed drop tests. The activity release approaches and subjects of quality assurance and surveillance for manufacturing and operation of the package were assessed by BAM as well.
The cask body is made of ductile cast iron and closed by two bolted lid systems with metal seals. The material of the lids is stainless steel. On each end of the cask a wood-filled impact limiter is installed to reduce impact loads to the cask under drop test conditions. In the cavity of the cask a basket for five spent fuel assemblies is arranged.
For the safety case a combination of experimental testing and analytical/numerical calculations were applied. In total, four drop tests were carried out at the BAM large drop test facility. Two tests were carried out as a full IAEA drop test sequence consisting of a 9m drop test onto an unyielding target and a 1m puncture bar drop test. The other two drop test were performed as single 9m drop tests and completed by additional analyses for considering the effects of an IAEA drop test sequence.
The main objectives of the drop tests were the investigation of the integrity of the package and its safety against release of radioactive material as well as the test of the fastening system of the impact limiters. Furthermore, the acceleration and strain signals measured during the tests were used for the verification of Finite-Element-Analysis (FEA) used for the safety analysis of the package design.
The finite-element models incorporated in the package design safety report include the cask body, the lid system, the inventory and the impact limiters with the fastening system. In this context special attention was paid to the modeling of the encapsulated wood-filled impact limiters.
Additional calculations using the verified numerical models were done by the applicant and assessed by BAM to investigate e.g. the brittle fracture of the cask body made of ductile cask iron within the package design approval procedure.
This paper describes the package design assessment from the view of the competent authority BAM including the applied assessment strategy, the conducted drop tests and the additional calculations by using numerical and analytical methods.
For disposal of the research reactor of the Technical University Munich FRM II a new transport and storage cask design was under approval assessment by the German authorities on the basis of International Atomic Energy Agency (IAEA) requirements. The cask body is made of ductile cast iron and closed by two bolted lid systems with metal seals. The material of the lids is stainless steel. On each end of the cask the wood-filled impact limiters are installed to reduce impact loads to the cask under drop test conditions. In the cavity of the cask a basket for five spent fuel elements is arranged.
This design has been assessed by the Bundesanstalt für Materialforschung und -prüfung (BAM) in view to the mechanical and thermal safety analyses, the activity release approaches, and subjects of quality assurance and surveillance for manufacturing and operation of the package.
For the mechanical safety analyses of the package a combination of experimental testing and analytical/numerical calculations were applied. In total, four drop tests were carried out at the BAM large drop test facility. Two tests were carried out as a full IAEA drop test sequence consisting of a 9m drop test onto an unyielding target and a 1m puncture bar drop test. The other two drop tests were performed as single 9m drop tests and completed by additional analyses for considering the effects of an IAEA drop test sequence.
The main objectives of the drop tests were the investigation of the integrity of the package and its safety against release of radioactive material as well as the test of the fastening system of the impact limiters. Furthermore, the acceleration and strain signals measured during the tests were used for the verification of finite-element (FE) models applied in the safety analysis of the package design.
Storage of spent nuclear fuel and high-level waste in dual purpose casks (DPC) is related with the challenge of maintaining safety for transportation over several decades of storage. Beside consideration of aging mechanisms by appropriate design, material selection and operational controls to assure technical reliability by aging management measures, an essential issue is the continuous control and update of the DPC safety case. Not only the technical objects are subject of aging but also the safety demonstration basis is subject of “aging” due to possible changes of regulations, standards and scientific/technical knowledge. The basic document, defining the transport safety conditions, is the package design safety report (PDSR) for the transport version of the DPC. To ensure a safe transport in future to a destination which is not known yet (because of not yet existing repository sites) periodical reviews of the PDSR, in connection with periodic renewals of package design approval certificates, have to be carried out. The main reviewing tool is a gap analysis. A gap analysis for a PDSR is the assessment of the state of technical knowledge, standards and regulations regarding safety functions of structures, systems and components.
For disposal of the German research reactor of the Technical University Munich FRM II a new transport and storage cask design was under approval assessment by the German authorities. The Bundesanstalt für Materialforschung und -prüfung (BAM) assessed the mechanical and thermal package safety and performed drop tests. The activity release approaches and subjects of quality assurance and surveillance for manufacturing and operation of the package were assessed by BAM as well.
The cask body is made of ductile cast iron and closed by two bolted lid systems with metal seals. The material of the lids is stainless steel. On each end of the cask a wood-filled impact limiter is installed to reduce impact loads to the cask under drop test conditions. In the cavity of the cask a basket for five spent fuel assemblies is arranged.
For the safety case a combination of experimental testing and analytical/numerical calculations were applied. In total, four drop tests were carried out at the BAM large drop test facility. Two tests were carried out as a full IAEA drop test sequence consisting of a 9m drop test onto an unyielding target and a 1m puncture bar drop test. The other two drop test were performed as single 9m drop tests and completed by additional analyses for considering the effects of an IAEA drop test sequence.
The main objectives of the drop tests were the investigation of the integrity of the package and its safety against release of radioactive material as well as the test of the fastening system of the impact limiters. Furthermore, the acceleration and strain signals measured during the tests were used for the verification of Finite-Element-Analysis (FEA) used for the safety analysis of the package design.
The finite-element models incorporated in the package design safety report include the cask body, the lid system, the inventory and the impact limiters with the fastening system. In this context special attention was paid to the modeling of the encapsulated wood-filled impact limiters.
Additional calculations using the verified numerical models were done by the applicant and assessed by BAM to investigate e.g. the brittle fracture of the cask body made of ductile cask iron within the package design approval procedure.
This paper describes the package design assessment from the view of the competent authority BAM including the applied assessment strategy, the conducted drop tests and the additional calculations by using numerical and analytical methods.
In Germany the concept of dry interim storage of spent fuel in dual purpose metal casks is implemented, currently for periods of up to 40 years. The casks being used have an approved transport package design in accordance with the international IAEA transport regulations as well. The storage of spent nuclear fuel and high-level waste in dual purpose casks (DPC) is related with the challenge of maintaining safety for transportation over several decades of storage.
Besides consideration of aging mechanisms by appropriate design, material selection and operational controls to assure technical reliability by aging management measures, an essential issue is the continuous control and update of the DPC safety case.
Not only the technical objects are subject of aging but also the safety demonstration basis is subject of “aging” due to possible changes of regulations, standards and scientific/technical knowledge.
To ensure a safe transport in future to a destination which is not known yet (because of not yet existing repository sites) periodical reviews of the Package Design Safety Report (PDSR), in connection with periodic renewals of package design approval certificates, have to be carried out.