Filtern
Dokumenttyp
- Zeitschriftenartikel (5)
- Buchkapitel (1)
Schlagworte
- Beton (3)
- Geringer fester Beton (2)
- Instandsetzung (2)
- Polymorphism (2)
- Spritzmörtel (2)
- Wasserbau (2)
- ZTV-LB 219 (2)
- Adsorption (1)
- Baustoffe (1)
- Bindemittel (1)
Organisationseinheit der BAM
Powdered activated carbon (PAC) for organic micro-pollutant (OMP) removal can be applied effectively on wastewater treatment plant (WWTP) effluents by using re-circulation schemes, accumulating the PAC in the system. This technique is complex because several factors are unknown: (i) the PAC concentration in the system, (ii) specific and average contact times of PAC particles, and (iii) PAC particle loadings with target compounds/competing water constituents. Thus, performance projections (e.g. in the lab) are very challenging. We sampled large-scale PAC plants with PAC sludge re-circulation on eight different WWTPs. The PAC plant-induced OMP removals were notably different, even when considering PAC concentrations in proportion to background organic sum parameters. The variability is likely caused by differing PAC products, varying water composition, differently effective plant/re-circulation operation, and variable biodegradation. Plant PAC samples and parts of the PAC plant influent samples were used in laboratory tests, applying multiples (0.5, 1, 2, 4) of the respective large-scale “fresh” PAC doses, and several fixed contact times (0.5, 1, 2, 4, 48 h). The aimwas to empirically identify suitable combinations of lab PAC dose (as multiples of the plant PAC dose) and contact time, which represent the PAC plant
performances in removing OMPs (for specific OMPs at single locations, and for averages of different OMPs at all locations). E.g., for five well adsorbing, little biodegradable OMPs, plant performances can be projected by using a lab PAC dose of twice the respective full-scale PAC dose and 4 h lab contact time (standard deviation of 13 %-points).
The unusually fast crystallization of the organic compound nifedipine has been investigated in detail using different solutions as precursors for the formation of the initial glassy nifedipine films. Starting from these amorphous films the crystallization process was investigated by time-resolved light microscopy at different temperatures around Tg of nifedipine. In all studied cases (acetone, acetonitrile, ethyl acetate, dichloromethane, tetrahydrofuran) the measured mean crystallization rates are, on average, 10000 times higher than rates reported in previous studies. Such high rates cannot be explained by a classical diffusional crystal growth mechanism of nifedipine. Instead, nifedipine shows a strong propensity for diffusionless growth. Solvent assisted or solvent induced preordering of the glassy modification is suggested to be the most probable driving force behind these fast crystallization processes. The nifedipine crystallization rates can be controlled not only by specific solvent–molecule interactions but also by temperature. Below 40 °C, the temperature dependence of the rates is generally small. Above 40 °C, a slowing down of the crystallization rates with increasing temperatures indicates a kinetic competition between different polymorphs. The molecular dynamics of nifedipine molecules in the amorphous phase as well as the relaxation times are studied by dielectric measurements. The dielectric data corroborate the inherently strong propensity of nifedipine to crystallize diffusionlessly under all conditions.
Quinaldine (2-methyl quinoline) is a liquid at room temperature, which can be supercooled to reach finally the glassy state. By heating the glass above the glass transition temperature Tg = 180 K the sample performs two subsequent transitions into, likewise, dielectrically active phases. Thus, the reorientational relaxations of these phases as well as the kinetics of the phase transitions can be tracked in a highly resolved way by dielectric spectroscopy. X-ray diffraction analysis clearly shows two structurally different crystalline phases in addition to the supercooled liquid. Calorimetric measurements support the notion of first order phase transitions, occurring irreversibly in the supercooled regime, and suggest that the intermediate crystalline phase is metastable, too. Analyzing the quite distinct dielectric relaxation strengths, we discuss the possible nature of the two crystalline phases. Additionally, a very similar behavior to quinaldine is observed for 3-methyl quinoline, indicating a broad field of polymorphism among the quinoline derivatives.