Filtern
Erscheinungsjahr
Dokumenttyp
- Zeitschriftenartikel (10)
- Beitrag zu einem Tagungsband (4)
- Vortrag (3)
Sprache
- Englisch (17) (entfernen)
Schlagworte
- Fatigue (6)
- Concrete (2)
- Constitutive modeling (2)
- Contact mechanics (2)
- Continnum damage model (2)
- Crystal plasticity (2)
- Finite element analysis (2)
- Fourier series (2)
- Simulation of concrete (2)
- Superalloy (2)
Organisationseinheit der BAM
Paper des Monats
- ja (1)
Eingeladener Vortrag
- nein (3)
An extension of the constitutive viscoplastic model of Meric and Cailletaud is presented. The new model
accounts for coupling of plasticity and viscoplasticity to describe the rate dependence at low and moderate
temperatures. The model contains two boundaries: an elastic one and a viscoplastic one. Between the
boundaries, the only contribution to yielding is the rate dependent viscoplastic mechanism. Once the viscoplastic
boundary is reached, an additional rate independent flow mechanism becomes active. However, the extended
model is not able to predict properly both creep and long-term relaxation tests simultaneously. Therefore, a
deformation-induced softening is assumed, which is supposed to mainly affect static recovery.
The model has been calibrated with the mechanical tests on a single crystal nickel-basis superalloy. The uniaxial
tests have been carried out in the temperature interval 600°C – 1100°C in [001], [011] and [111] specimens.
The predicted creep, relaxation and non-isothermal cyclic tests exhibit reasonable agreement with the
experimental observations.
A computationally efficient solution scheme is presented for the mechanical problems whose formulations include the Kuhn–Tucker or Signorini–Fichera conditions. It is proposed to reformulate these problems replacing inequalities in these conditions by equations with respect to new unknowns. The solutions of the modified problems have simple physical meanings and determine uniquely the unknowns of the original problems. The approach avoids application of multi-valued operators (inclusions or inequalities) in formulation of the problems. Hence, the modified formulations are suitable for numerical analysis using established powerful mathematical methods and corresponding solvers developed for solving systems of non-linear equations.
To demonstrate the advantages of the proposed approach, it is applied for solving problems in two different areas: constitutive modeling of single-crystal plasticity and mixed boundary value problems of elastic contact mechanics with free boundaries. The original formulations of these problems contain respectively the Kuhn–Tucker and Signorini–Fichera conditions. A problem of the former area is integrated using an implicit integration scheme based on the return-mapping algorithm. The derived integration scheme is free of any update procedure for identification of active slip systems. A problem of the latter area is reduced to solution of non-linear integral boundary equations (NBIEs). Numerical examples demonstrate stability and efficiency of the solution procedures and reflect the mathematical similarities between the both non-linear problems.
A phase field model of brittle fracture has been developed to simulate the Hertzian crack induced by penetration of a rigid sphere to an isotropic linear-elastic half-space. The fracture formation is regarded as a diffusive field variable, which is zero for the intact material and unity if there is a crack. Crack growth is assumed to be driven by a strain invariant. The numerical implementation is performed with the finite element method and an implicit time integration scheme. The mechanical equilibrium and the phase field equations are solved in a staggered manner, sequentially updating the displacement field and the phase field variable. Numerical examples demonstrate the capability of the model to reproduce the nucleation and growth of the Hertzian cone crack.
A crystallographic constitutive model is developed, which accounts for both rate-sensitive and rate-insensitive flow. Single-crystal plasticity and viscoplasticity are the limiting cases of the model, so that it properly reflects the material response over a wide temperature range. A non-linear dynamic recovery is included to properly describe ratchetting. We provide a robust integration scheme based on generalization of the return-mapping algorithm and of the procedure for active set search.
The implicit integration and consistent tangent are implemented through the UMAT subroutine in the ABAQUS finite element program. The capability of the model to account for both high and low strain rates is demonstrated in numerical examples. Finally, the stability of integration scheme and quadratic convergence of the global NewtonRaphson equilibrium iterations are demonstrated on the example of a notched bar under tension.
The onset of plasticity in a single crystal C60 fullerite was investigated by nanoindentation on the (111) crystallographic plane. The transition from elastic to plastic deformation in a contact was observed as pop-in events on loading curves. The respective resolved shear stresses were computed for the octahedral slip systems ⟨011¯¯¯⟩{111}, supposing that their activation resulted in the onset of plasticity. A finite element analysis was applied, which reproduced the elastic loading until the first pop-in, using a realistic geometry of the Berkovich indenter blunt tip. The obtained estimate of the C60 theoretical shear strength was about 1/11 of the shear modulus on {111} planes.
Gas turbines are widely used for a variety of purposes including power generation, compression or as jet engines in aircrafts. The critical components of a gas turbine are the high-pressure turbine blades which operate under severe conditions. These include thermo-mechanical loadings over temperatures ranging from room temperature up to 1100°C.
While a large number of constitutive models for single crystals have been proposed, most applications are restricted to special loading scenarios, temperature range and deformation mechanisms. In particular, a number of models are focused on pure creep. Only a few papers consider application of both creep and fatigue. Applications of the constitutive models to long-term stress relaxation are even scarcer. The new model assumes deformation-induced softening and can properly reproduce the viscous behavior at different time scales.
The model has been calibrated with the uniaxial tests at 800°C and 950°C in [001], [011] and [111] specimens of a nickel-basis superalloy. The predicted creep, short- and long-term relaxation and cyclic tests are in reasonable agreement with the experimental observations.
Computational methods for lifetime prediction of metallic components under high-temperature fatigue
(2019)
The issue of service life prediction of hot metallic components subjected to cyclic loadings is addressed. Two classes of lifetime models are considered, namely, the incremental lifetime rules and the parametric models governed by the fracture mechanics concept. Examples of application to an austenitic cast iron are presented. In addition, computational techniques to accelerate the time integration of the incremental models throughout the fatigue loading history are discussed. They efficiently solve problems where a stabilized response of a component is not observed, for example due to the plastic strain which is no longer completely reversed and accumulates throughout the fatigue history. The performance of such an accelerated Integration technique is demonstrated for a finite element simulation of a viscoplastic solid under repeating loading–unloading cycles.
Mean-field modeling and phase-field simulation of grain growth under directional driving forces
(2024)
Directional grain growth is a common phenomenon in the synthetic and natural evolution of various polycrystals. It occurs in the presence of an external driving force, such as a temperature gradient, along which grains show a preferred, yet competitive, growth. Novel additive manufacturing processes, with intense, localized energy deposition, are prominent examples of when directional grain growth can occur, beneath the melting pool. In this work, we derive a phenomenological mean-field model and perform 3D phase-field simulations to investigate the directional grain growth and its underlying physical mechanisms. The effect of the intensity of driving force is simulated and systematically analyzed at the evolving growth front as well as various cross-sections perpendicular to the direction of the driving force. We found that although the directional growth significantly deviates from normal grain growth, it is still governed by a power law relation <R> α tⁿ with an exponent n ~ 0.6–0.7. The exponent n exhibits a nontrivial dependence on the magnitude of the directional driving force, such that the lowest growth exponent is observed for intermediate driving forces. We elaborate that this can originate from the fact that the forces at grain boundary junctions evolve out of balance under the influence of the directional driving force. With increasing the driving forces, the growth exponent asymptotically approaches a value of n ≈ 0.63, imposed by the largest possible grain aspect ratio for given grain boundary energies. The current combined mean-field and phase-field framework pave the way for future exploration in broader contexts such as the evolution of complex additively manufactured microstructures.
Constitutive modeling of creep-fatigue interaction for normal strength concrete under compression
(2015)
Conventional approaches to model fatigue failure are based on a characterization of the lifetime as a function of the loading amplitude. The Wöhler diagram in combination with a linear damage accumulation assumption predicts the lifetime for different loading regimes. Using this phenomenological approach, the evolution of damage and inelastic strains and a redistribution of stresses cannot be modeled. The gradual degration of the material is assumed to not alter the stress state. Using the Palmgren–Miner rule for damage accumulation, order effects resulting from the non-linear response are generally neglected.
In this work, a constitutive model for concrete using continuum damage mechanics is developed. The model includes rate-dependent effects and realistically reproduces gradual performance degradation of normal strength concrete under compressive static, creep and cyclic loading in a unified framework. The damage evolution is driven by inelastic deformations and captures strain rate effects observed experimentally. Implementation details are discussed. Finally, the model is validated by comparing simulation and experimental data for creep, fatigue and triaxial compression.
Concrete is a complex material. Its properties evolve over time, especially at early age, and are dependent on environmental conditions, i.e. temperature and moisture conditions, as well as the composition of the material.
This leads to a variety of macroscopic phenomena such as hydration/solidification/hardening, creep and shrinkage, thermal strains, damage and inelastic deformations. Most of these phenomena are characterized by specific set of model assumptions and often an additive decomposition of strains into elastic, plastic, shrinkage and creep components is performed. Each of these phenomena are investigated separately and a number of respective independent models have been designed. The interactions are then accounted for by adding appropriate correction factors or additional models for the particular interaction. This paper discusses the importance of reconsider even in the experimental phase the model assumptions required to generalize the experimental data into models used in design codes. It is especially underlined that the complex macroscopic behaviour of concrete is strongly influenced by its multiscale and multiphyscis nature and two examples (shrinkage and fatigue) of interacting phenomena are discussed.