Filtern
Dokumenttyp
- Beitrag zu einem Tagungsband (4) (entfernen)
Referierte Publikation
- nein (4)
Schlagworte
- Leaching (4) (entfernen)
Organisationseinheit der BAM
Ziel eines laufenden UFOPLAN-Vorhabens ist es, Datendefizite für Bodenmaterialien, die unter die neuen Kriterien der Verwertungsmöglichkeiten außerhalb der durchwurzelbaren Bodenschicht nach den §§ 6 bis 8 der Novelle der BBodSchV fallen, zu schließen und potenzielle Verwertungsmöglichkeiten aufzuzeigen.
Neben den Feststoffwerten wird dabei das Elutionsverhalten zur Bewertung herangezogen. Durch die Umstellung des Elutionsverfahrens von einem W/F von 10 l/kg (bisherige Regelung in der LAGA M 20) auf ein W/F von 2 l/kg bestehen erhebliche Unsicherheiten im Hinblick auf die Einstufung von Bodenmaterialien zur Verwertung.
Neben der Untersuchung relevanter Bodenmaterialien werden auch vorhandene Daten ausgewertet. Der Schwerpunkt der Untersuchungen wurde auf die Schadstoffgruppe der PAK gelegt. Dabei werden auch Probleme der Vergleichbarkeit verschiedener Verfahren der PAK-Analytik angesprochen.
Antimony in incineration bottom ash – Leaching behavior and conclusions for treatment processes
(2020)
Antimony (Sb) is used in industrial products mainly as flame retardant in plastic material. Due to such additives in plastics, about a half of Sb ends up in municipal solid waste incineration at the end-of-life and consequently in relevant amounts in the generated bottom ash. In contact with water, the initial leachability is low, as antimonates form sparingly soluble compounds with Ca2+. Following the carbonation of the incineration bottom ash (IBA) during the proceeding ageing the pH in the leachates decreases. With decreasing concentration of Ca in the eluate the solution equilibrium changes and antimonates dissolve. In Germany it is intended to regulate Sb in IBA with the planned implementation of the so called Mantelverordnung (MantelVO, containing provisions on the utilisation of mineral waste) in the near future. The limit values set in the draft might be critical for IBA and therefore pose a risk for the utilisation of the mineral fraction of IBA in the well-established recycling routes.
Leaching experiments on the release of heavy metals and PAH from C&D waste and MSWI bottom ash
(2010)
Leaching tests are fundamental tools for the assessment of long-term impact of
contaminated waste materials on the soil-groundwater pathway. Waste materials should be
tested under conditions equal to their actual application in re-use scenarios to achieve reliable
results. Since the standards for leaching procedures available on international level so far are
either not validated or considered inadequate in respect to coarse grained materials, new
standards had to be developed. Therefore column percolation and batch test procedures have
been standardized and validated to enable their introduction to new German regulations
concerning waste management. Practical aspects of the test procedures as well as the
boundary conditions compared to the already existing standards will be described. Examples
including round robin test results will be given to justify the selection of the new
specifications.