Filtern
Erscheinungsjahr
- 2017 (2) (entfernen)
Dokumenttyp
Referierte Publikation
- nein (2) (entfernen)
Schlagworte
- AKR (1)
- Accelerated concrete prism test (1)
- Alkali-Kieselsäure-Reaktion (1)
- Alkali-silica reaction (1)
- Baustoffe (1)
- Beton (1)
- Continuous monitoring (1)
- Dauerhaftigkeit (1)
- Ermüdung (1)
- Expansion modelling (1)
Ermüdungsbedingte Degradation und ihre Auswirkungen auf den Stofftransport in Fahrbahndeckenbeton
(2017)
Im Rahmen des Beitrags soll aufgezeigt werden, welchen Einfluss eine mechanisch induzierte Vorschädigung (Ermüdungsbeanspruchung) auf den Ablauf und die Intensität des AKR-Schädigungsprozesses hat. Dies erfordert eine ausführliche Beschreibung der vielfältigen interagierenden Schädigungs- und Transportprozesse und aufbauend eine enge Verknüpfung von Experimenten mit einer mehrskaligen Modellierung.
Die experimentelle Basis bildete die mechanische Vorschädigung (Ermüdungsbeansprochung) großformatiger Balken aus einem Fahrbahndeckenbeton bei Einsatz alkaliempfindlicher Gesteinskörnungen. Aus diesen großformatigen Balken wurden nach erfolgter Ermüdungsbeanspruchung kleinformatige Probekörper gewonnen. An diesen wurde detailliert untersucht wie sich die mechanische Vorschädigung auf das Betongefüge und die daraus resultierenden Transport- und Schädigungsprozesse auswirkt. Von der mechanisch induzierten Vorschädigung bis zum AKR Schädigungsprozess sollten in diesem Kontext die Rissbildungsprozesse und der interagierende Eintrag bzw. die Auslaugung der Alkalien ganzheitlich betrachtet werden. Der Beitrag fokussiert auf die Charakterisierung der infolge der mechanischen Vorschädigung induzierten Rissbildungsprozesse. Ferner wird detailliert auf die Auswirkungen der mechanischen Rissbildung auf den Stofftransport eingegangen.
The accelerated concrete prism test (ACPT-60 °C) facilitates testing of alkali-silica reactivity of aggregates within five months. Manual measurement is usually conducted to determine expansion of test specimen every 28 days. This conventional procedure gives only limited insight to expansion behaviour of ASR-affected prisms. Due to the large time intervals, expansion exceeding the critical value of 0.3 mm/m is likely to be noticed late. Continuous recording resolves this problem and delivers beneficial information on the shape of the expansion curve.
Displacement transducers integrated into a special testing equipment developed at BAM put continuous measurement into practice. Additionally, ultrasonic velocity and acoustic emissions are measured in-situ and provide deeper insights into hydration and crack formation processes during the test.
Aiming for an automated testing method close to the German guideline, the following technical and methodical challenges arise. Changing of the vertical orientation of the prisms with every manual measurement as standardised cannot be implemented. Furthermore, preliminary results already proved true that cooling and heating cycles, as necessarily associated with each manual measurement, can evoke additional expansion. Therefore, interrupted and continuously measured expansions reveal systematic differences, indicating the necessity to adjust the threshold expansion value for automated testing.
Results presented in the paper: Different types of reactive aggregate have been tested applying continuous and manual expansion measurement to the concrete specimens. Development of continuously measured ultrasonic velocity and acoustic emissions of the aggregates tested diverge significantly while the expansion curves vary in shape and maximum strain. Prisms produced from a slowly reacting aggregate do not exhibit noticeable crack formation. It shows that comprehensive measuring helps describing and distinguishing ASR-damage mechanisms.
Models of ASR-induced expansion, available in the open literature, so far are validated with discontinuous data hardly tracing the modelled curve. Continuous measurement improves validation and further model development.