Filtern
Dokumenttyp
- Zeitschriftenartikel (12)
Sprache
- Englisch (10)
- Deutsch (1)
- Mehrsprachig (1)
Referierte Publikation
- ja (12)
Schlagworte
- Thermal analysis (3)
- ESR spectroscopy (2)
- Mössbauer (2)
- 1,4-Dimethylpiperazinium chloroferrate(II,III) (1)
- A. Inorganic compounds (1)
- Activation/deactivation processes (1)
- Al2O3 (1)
- Altenuene (1)
- Alternariol (1)
- Alternariol monomethyl ether (1)
Organisationseinheit der BAM
The 57Fe-Moessbauer spectrum of (dmpipzH2)2[FeIII(H2O)2Cl4][FeIII Cl4]Cl2 (1) consists of two doublets caused by a strongly distorted octahedral and a non-distorted tetrahedral component. Both (dmpipzH2)[FeIIIBr4]2 (2) and (trienH2)[FeIIIBr4]Br (3) show only one doublet indicating a more strongly distorted iron(III) species for 2 and a less-distorted one in the case of 3. For all compounds investigated, the ESR spectra reveal the existence of ground states with predominant antiferromagnetic coupling. The Néel temperatures amount to <4.2 K for 1, 4 K for 3 and 48 K for 2. In the case of 2, both the Moessbauer and the ESR spectra reveal the formation of exchange-coupled {FeBr4} units which has been attributed to a significant cation influence. The fine structure of residual paramagnetic [FeBr4]- subunits remaining in the crystalline matrix could be directly determined. Temperature dependent AC and DC susceptibility measurements of 2 and 3 confirmed the results.
Conventional simultaneous thermal analysis, capillary-coupled TGMS, in situ and ex situ Raman and Mössbauer spectroscopy, as well as chemical analysis have been used for the investigation of the first decomposition step of the mixed valence chloroferrate (dmpipzH2)6[Fe(II)Cl4]2[Fe(III)Cl4]2[Fe(II)Cl5][Fe(III)Cl6]. Under argon at ca. 200°C, an almost complete reduction proceeds in a solid state reaction forming Fe(II). It is accompanied by the release of HCl and, to a minor degree, carbon containing species. A multi-phase product with at least two chloroferrate species, coke, and C,H,N-containing polymers is formed. Binuclear iron complexes, such as (dmpipzH)2[Fe(II)2Cl6], and small amounts of (dmpipzH)[Fe(III)Cl4] have been proposed to be the major and minor component of the product mixture, respectively.
The role of Fe3+ ions in the transformations from boehmites and pseudoboehmite xerogels via transition aluminas to corundum was studied here. Especially, the active iron species responsible for the decrease of the temperature of transformation to corundum were looked for. To enable the formation of various Fe3+
and Fe2+ species, samples were subjected to thermal treatments in different atmospheres as well as mechanically activated. Thermal analysis and ESR spectroscopy served to follow the processes and to characterise the resulting products. It was found that (i) isolated Fe3+ ions can indicate local structural changes but have (almost) no influence on the temperature of corundum formation, (ii) the temperature of corundum formation decreases in the result of action of small
α-Fe2O3 particles and (iii) during thermal treatments Fe3+ ions are distributed between different phases or precursors thereof: transition aluminas, corundum, Fe2O3, and a Fe3+ pool.
The Goldschmidt reaction (2Al+α-Fe2O3) was investigated both under mechanical and thermal activation by employing a combination of analytical methods such as ESR and Mössbauer spectroscopy, magnetic susceptibility, X-ray powder diffraction, and thermal analysis (TA). Both the mechanical treatment and the TA runs under air caused the reaction conditions of 'quiet redox reactions' due to a retarding effect and enabled a reaction study in a 'slow motion mode'. This allowed to establish distinct partial steps of the integral reaction process depending on the intensity of the mechanical impact, the educt composition, the gas phase composition, and, finally, the thermal excitation in the TA runs. Particular attention was payed to the role of the gas phase and to the reaction of aluminum with differently activated oxygen species. The phlegmatizing effect was traced back to the formation of Al2O3 coverages of the Al particles.
The fate of doped iron species during various mechanically and thermally initiated redox reactions and aggregation processes in crystalline and amorphous AlO(OH) or Al2O3 matrices was investigated. The amorphization of the matrix was performed by chemical (i.e., via sol-gel processes) or mechanochemical treatment (high-energy ball milling). Thermal analysis, coupled with mass spectrometry (TA-MS), Mössbauer spectroscopy, and electron spin resonance (ESR), was used. The TA under various gas atmospheres allowed preparing samples under a controlled temperature regime, together with a controlled gas influence. Both the effect of mechanical activation and the influence of the iron doping could be followed macroscopically via the down-shift of the peak temperature of the corundum formation. The ESR data characterize the Fe3+ ions and their interaction with the magnetic surrounding based on the fine structure parameters. The Mössbauer data allowed the characterization of the Fe(0), Fe2+, and Fe3+ species, together with providing information about their coordinative surrounding. Both methods provided general complementary spectroscopical information.
Unexpectedly, (FeOx)n and (FexAl1-x)2O3 aggregates could also be detected in the range of low Fe concentrations. It was demonstrated that even in the low-level doped systems [(FexAl1-x)2O3 with x ≥ 0.01], all the essential spectroscopic phenomena occur. At higher Fe concentrations, they were discovered to be caused by magnetic and spin exchange interactions as well as by solid-state reactions during and after the mechanical activation.
Ultrashort pulse laser processing can result in the secondary generation of unwanted X-rays if a critical laser irradiance of about 10^13 W/cm^2 is exceeded. Spectral X-ray emissions were investigated during the processing of tungsten and steel using three complementary spectrometers (based on CdTe and silicon drift detectors) simultaneously for the identification of a worst-case spectral scenario. Therefore, maximum X-ray photon energies were determined, and corresponding dose equivalent rates were calculated. An ultrashort pulse laser workstation with a pulse duration of 274 fs, a center wavelength of 1030 nm, pulse repetition rates between 50 kHz and 200 kHz, and a Gaussian laser beam focused to a spot diameter of 33 µm was employed in a single pulse and burst laser operation mode. Different combinations of laser pulse energy and repetition rate were utilized, keeping the average laser power constant close to the maximum power of 20 W. Peak irradiances ranging from 7.3 × 10^13 W/cm^2 up to 3.0 × 10^14 W/cm^2 were used. The X-ray dose equivalent rate increases for lower repetition rates and higher pulse energy if a constant average power is used. Laser processing with burst mode significantly increases the dose rates and the X-ray photon energies. A maximum X-ray photon energy of about 40 keV was observed for burst mode processing of tungsten with a repetition rate of 50 kHz and a peak irradiance of 3 × 10^14 W/cm^2.
The investigation of iron-doped AlO(OH)/Al2O3 systems revealed that the combined employment of Mössbauer and ESR spectroscopies together with thermal analysis yields meaningful data with complementary information. This mutual complementarity is based on the coexistence of Fe point defects with the corresponding aggregated FeOx species which has been observed even for very low Fe concentrations. Competing redox processes between the dopant, the AlOx matrix, and the gas atmosphere during the thermal treatment enable the generation of solid phases exhibiting specific chemical properties. The entire reaction process is influenced by a specific mechanical and thermal pre-treatment that affects predominantly oxydative processes in the matrix. A protecting influence of the matrix preventing further reductive attack of the Fe3+ Fe2+ ions by hydrogen has been established.
The stability of the Alternaria mycotoxins alternariol, alternariol monomethyl ether, and altenuene upon bread baking was investigated by model experiments using a spiked wholemeal wheat flour matrix. For alternariol and alternariol monomethyl ether, but not for altenuene, degradation products, formed through a sequence of hydrolysis and decarboxylation, could be identified in pilot studies. The simultaneous quantification of alternariol, alternariol monomethyl ether, altenuene, and the degradation products was achieved by a newly developed high performance liquid chromatography tandem mass spectrometry (HPLC-MS/MS) multimethod. The obtained quantitative data indicate that the Alternaria mycotoxins are barely degraded during wet baking, while significant degradation occurs upon dry baking, with the stability decreasing in the order alternariol monomethyl ether > alternariol > altenuene. The novel degradation products could be detected after the wet baking of flour spiked with alternariol and in a sample survey of 24 commercial cereal based baking products.