Filtern
Erscheinungsjahr
Dokumenttyp
- Vortrag (75)
- Beitrag zu einem Tagungsband (46)
- Zeitschriftenartikel (18)
- Beitrag zu einem Sammelband (12)
- Posterpräsentation (7)
- Buchkapitel (5)
- Forschungsbericht (4)
- Sonstiges (3)
Referierte Publikation
- nein (170) (entfernen)
Schlagworte
- Phosphor (18)
- Klärschlamm (17)
- Recycling (16)
- Klärschlammasche (14)
- Phosphorus recovery (13)
- Phosphorrückgewinnung (11)
- Sewage sludge (9)
- Sewage sludge ash (8)
- Thermochemical treatment (8)
- Bauschuttaufbereitung (7)
- Rückgewinnung (6)
- Gypsum (5)
- Lichtbogenofen (5)
- Abwasser (4)
- Düngemittel (4)
- Gips (4)
- Klärschlammverordnung (4)
- Phosphat (4)
- Stahlwerksschlacke (4)
- Thermo-chemical treatment (4)
- Zement (4)
- Ökobilanzielle Bewertung (4)
- Abbruch (3)
- CDW processing (3)
- Environmental evaluation (3)
- Gichtgasschlamm (3)
- Monoverbrennung (3)
- Phosphorus (3)
- Pyrometallurgie (3)
- Recycling fertiliser (3)
- Tantal (3)
- Agronomische Effizienz (2)
- Altfett (2)
- Blast furnace sludge (2)
- CDW treatment (2)
- CFK (2)
- Carbonfaser (2)
- Dünger (2)
- Electric arc furnace dust (2)
- Enzymkatalyse (2)
- Fertiliser (2)
- Filterstaub (2)
- LD-Schlacke (2)
- LIBS (2)
- Nutrient recovery (2)
- P-Düngemittel (2)
- P-Recyclingdünger (2)
- P-recovery (2)
- Phopshorus recovery (2)
- Pilotanlage (2)
- Pyrometallurgy (2)
- RC-Beton (2)
- RCA (Recycled concrete aggregates) (2)
- Rare earth elements (2)
- Recycling fertilisers (2)
- Resource recovery (2)
- Ressource (2)
- Ressourcen (2)
- Rotschlamm (2)
- Schlacke (2)
- Sekundärrohstoffe (2)
- Selective dismantling (2)
- Struvit (2)
- Tantalum (2)
- Wertstoffpotential (2)
- Zementersatz (2)
- Zinc (2)
- Zinnschlacke (2)
- ASH DEC (1)
- Abbruchverfahren (1)
- Abwasserbehandlung (1)
- Abwasserreinigung (1)
- Aggregetes (1)
- Alit (1)
- Alite (1)
- Alkalien (1)
- Ash treatment (1)
- Ashes (1)
- BONARES (1)
- Bauschutt (1)
- Betonbrechsand (1)
- Betonherstellung (1)
- Bio-P-Kläranlage (1)
- Bioavailability (1)
- Biokohle (1)
- Bodenfruchtbarkeit (1)
- Building waste (1)
- Cadmiumtellurid (1)
- Carbide formation (1)
- Carbon feeding (1)
- Carbonfasern (1)
- CdTe-Modules (1)
- Chemische Löslichkeit (1)
- Chlorierung (1)
- Chlorination (1)
- Chrom (1)
- Circular economy (1)
- Coatings (1)
- Concrete aggregates (1)
- Construction (1)
- Controlled release fertilisers (1)
- Corrosion (1)
- Critical raw materials (1)
- DGT-Methode (1)
- Demolition/dismantling (1)
- Demolition/selective dismantling (1)
- Diffusive Gradients in thin films (DGT) (1)
- Digestion methods (1)
- Düngemittelanalytik (1)
- Düngemittelgewinnung (1)
- Dünnschichtmodul (1)
- Elektrolichtbogenofen (1)
- Elektroofenstaub (1)
- Elimination (1)
- Environmental LCA (1)
- Environmental pollution (1)
- Extraktion (1)
- Extraktionen (1)
- Fetiliser (1)
- Fluoreszenzlampen (1)
- Fällmittel (1)
- Greenhouse pot experiments (1)
- Heavy metal recycling (1)
- Heavy metal removal (1)
- Heavy metals (1)
- High-grade recycling (1)
- Hochwertiges Recycling (1)
- Hydrogen (1)
- Klimaneutralität (1)
- Kläranlage (1)
- Klärschlammdüngung (1)
- Kritische Rohstoffe (1)
- Landwirtschaft (1)
- Landwirtschaftliche Klärschlammverwertung (1)
- Large scale consideration (1)
- Laser-induced breakdown spectroscopy (1)
- Lead (1)
- Low-temperature-conversion (1)
- Makronährstoffe (1)
- Mass balance (1)
- Meat and bone meal (1)
- Mephrec (1)
- Metal (1)
- Metal recovery (1)
- Mineral phases (1)
- Monitoring (1)
- Mono-Verbrennung (1)
- Mono-incineration (1)
- Nasschemische Aufschluss-/Leachingverfahren (1)
- Nassmechanische Aufbereitung (1)
- Natural resources (1)
- Niobium (1)
- Nährstoffe (1)
- On-line analysis (1)
- Online-Analyse (1)
- Online-RFA (1)
- P-Recyclate (1)
- P-Rückgewinnung (1)
- P-fertiliser (1)
- P-fractionation (1)
- P-plant-availability (1)
- Permeat (1)
- Perowskit (1)
- Pflanzenverfügbarkeit (1)
- Pflanzenwurzel (1)
- Phoshorrückgewinnung (1)
- Phosphataufbereitungsanlage (1)
- Phosphor-Recycling (1)
- Phosphor-Rückgewinnung (1)
- Phosphorous (1)
- Phosphorous recovery (1)
- Phosphorus fertilizer (1)
- Phosphorus recycling (1)
- Photonenaktivierungsanalyse (1)
- Photovoltaic (PV) (1)
- Photovoltaik (1)
- Plasma (1)
- Portland Cement (1)
- Prozessoptimierung (1)
- Pyrolyse (1)
- Recovery (1)
- Recyclingdüngemittel (1)
- Red mud (1)
- Reduction (1)
- Reduction of sulphates (1)
- Reduction process (1)
- Reductive smelting (1)
- Reduktionsprozess (1)
- Relative agronomische Effizienz (RAE) (1)
- Resource recovery potential (1)
- Resources (1)
- Ressourcenrückgewinnung (1)
- Ressourcenschutz (1)
- Reststoffe (1)
- Retentat (1)
- Ringversuch P-Gehalt in Klärschlamm (1)
- Robustheitstests (1)
- Sekundärrohstoff (1)
- Sekundärrohstoffdüngemittel (1)
- Selective chlorination (1)
- Seltene Erden (1)
- Seltenerdmetalle (1)
- Separation techniques (1)
- Sewage sludge ordinance (1)
- Sewage sludges (1)
- Sludge disposal (1)
- Solar energy (1)
- Stalwerksschlacke (1)
- Steelmaking slag (1)
- Stofftrennung (1)
- Sulfatentfachtung (1)
- Sustainability (1)
- Technologiemetalle (1)
- Technology metals (1)
- Thermochemisch (1)
- Thermochemische Behandlung (1)
- Thermochemische Prozesse (1)
- Thermochemische Verfahren (1)
- Thermochemistry (1)
- Thermodynamics (1)
- Treatment of C&D wastes (1)
- Tricalcium-silicate (1)
- Tricalciumsilikat (1)
- Vegetationsversuche (1)
- Verbrennung (1)
- Vergasung (1)
- WEEE (1)
- Wasserstoffplasma (1)
- Waste management (1)
- Waste materials (1)
- Waste water (1)
- Waste water treatment (1)
- Wastewater (1)
- XANES spectroscopy (1)
- XRD (1)
- Zementklinker (1)
- Zentrat (1)
- Zink (1)
- thermochemical substance separation (1)
- thermochemische Behandlung (1)
- Ökobilanzielle Betrachtung (1)
Organisationseinheit der BAM
- 4 Material und Umwelt (55)
- 4.4 Thermochemische Reststoffbehandlung und Wertstoffrückgewinnung (55)
- 7 Bauwerkssicherheit (3)
- 7.1 Baustoffe (2)
- 1 Analytische Chemie; Referenzmaterialien (1)
- 1.4 Prozessanalytik (1)
- 4.2 Material-Mikrobiom Wechselwirkungen (1)
- 4.3 Schadstofftransfer und Umwelttechnologien (1)
- 7.4 Baustofftechnologie (1)
CFK-Abfälle werden trotz der bestehenden Verfahren zur Rückgewinnung der Carbonfasern zukünftig vermehrt anfallen. Für diese Abfälle wird nach technischen Lösungen der energetischen oder stofflichen Verwertung gesucht. Eine Möglichkeit ist die Nutzung der CFK-Abfälle als Primärkohleersatz im Lichtbogenofen bei der Stahlherstellung.
The rare earth elements (REEs) are a group of 17 elements from the lanthanide series including scandium and yttrium that share similar physical and chemical properties. They are progressively important for transition to a green, low-carbon economy due to their vital role in electric cars, permanent magnets, fluorescent lamps, rechargeable NiMH batteries, catalysts and other applications. In reality, the term “rare” is misleading as these elements are widely present in the earth’s crust. However, even if not rare, REEs have a high supply risk due to the geopolitical situation e.g. resulting from limited Chinese exports. This, along with their importance in various clean and high-tech applications, has led the EU and the U.S. to label certain REEs, especially europium, terbium and yttrium as critical elements. Recycling is often considered as one of the ways to reduce REEs criticality, especially the import dependency.
A recycling strategy for REE requires reliable analytical data of different types of waste streams. The REE bearing waste matrices can be completely different depending on its origin. Digestion methods prior to ICP-OES / -MS analysis must be optimized for the different matrices to guarantee reliable results. We present two examples of different REE bearing waste streams - fluorescence lamp shredder waste and red mud - and show how the analytical procedures were optimized.
Zukünftig werden vermehrt P-Recyclate auf den Düngemittelmarkt kommen. Diese müssen ausreichend charakterisiert werden, um Sicherheit und Wirksamkeit beurteilen zu können. Mit dem Vortrag wurde der wissenschaftliche Beirat für Düngungsfragen des Bundesministeriums für Ernährung und Landwirtschaft beraten.
Die Reduktion von Metalloxiden zum Metall in einer schmelzflüssigen mineralischen Matrix stellt die Grundlage vieler metallurgischer Verfahren dar.
Eine Prozessoptimierung und -kontrolle setzt allerdings die genaue Kenntnis der chemischen Zusammensetzung der Schmelze voraus.
Im Beitrag wird LIBS als Methode zur Online-Analyse von Hochtemperaturschmelzen vorgestellt.
One of the key elements in the transformation towards a circular economy (CE) is providing more sustainable practices for resources and waste management. Improvement actions focused on transformation towards a CE should be targeted at all groups of materials and waste. As water is essential for human survival and well-being and plays a significant role in sustainable development (SD), the actions related to the reuse of water and the recovery of raw materials from wastewater and other water-based waste should be taken. The paper presents a proposition for a new CE model framework in the water and wastewater sector, which includes the six following actions: reduction—prevent wastewater generation in the first place by the reduction of water usage and pollution reduction at source; reclamation (removal)—an application of effective Technologies for the removal of pollutants from water and wastewater; reuse—reuse of wastewater as an alternative source of water supply (non-potable usage), recycling—recovery of water from wastewater for potable usage; recovery—recovery of resources such as nutrients and energy from water-based waste, and rethink—rethinking how to use resources to create a sustainable economy, which is `free` of waste and emissions. The novelty of the proposed CE model framework is that it presents possible ways of implementing CE principles in the water and wastewater sector, with a strong emphasis not only technological but also organisational and societal changes. Application of the proposed model may help to further transform the European economy to the CE model. Moreover, the indicated model can be significant tool supporting an assessment of local or regional progress towards CE in the water and wastewater sector and further environmental management and planning.
Recycled fertilizers produced using processes for the recovery of phosphate from residual materials such as wastewater, sewage sludge and sewage sludge ashes show very good bioavailability, but it is still a product largely unknown to the market. The aim of CLOOP is therefore to document the properties and effects of such fertilizers through chemical, mineralogical and ecological analyses as well as analytical method development and pot and field plant growth trials.
Outotec focused on 3 points in CLOOP: Experimental campaigns, process simulations as well as economic analyses with focus on the AshDec process, respectively the design of a large-scale AshDec plant for phosphorus recovery. The laboratory scale trials as well as the semi-industrial scale campaign provided valuable insights into the operating parameters of the process and the plant. As a result, for example, the temperature range could be significantly lowered, and the additive addition reduced by approx. 20 %. They have further shown that the AshDec process is not susceptible to operating fluctuations and that the product can be consistently produced at high quality. With the selection of suitable operating parameters, heavy metals (As, Pb, Cd, (Zn)) can be removed. Within the campaign, about 1.5 t of fertilizer for the plant trials in CLOOP could be produced. An AshDec plant process was digitally created in simulation software, allowing valuable process parameters to be simulated at various operating parameters. On this basis, a full-scale plant was designed. The data obtained in the project were used for a detailed economic analysis including a sensitivity analysis. It was possible to show under which conditions this plant can be operated economically.
At BAM, the AshDec fertilizer was synthesized with different additives and then applied to plant experiments at Uni Bonn. The goal hereby was to check differences in plant uptake. Because of the promising results of AshDec synthesized with sodium-carbonate and because this AshDec version does not require special off gas treatment for sulfur recovery (compared to AshDec synthesized with sodium-sulfate), all project partners agreed on continuing working with this AshDec variation. It was then used as a raw P-source for formulating it into NPK-fertilizers, by granulation with ammonium-sulfate and straw ash as potassium source. These recycling fertilizers were applied to plant- and field experiments by project partners in Brazil (University of Sao Paulo) and Australia (University of Queensland). Furthermore, in leaching experiments, the solubility of phosphorus in AshDec was compared to triple super phosphate. The experiments were carried out on soils with a varying phosphorus buffering index. Results show, that the phosphorus form in AshDec is way less soluble in water. This indicates that AshDec has the potential for a so-called next generation fertilizer – a fertilizer which’s nutrients remain in the soil and supply the plant according to its needs. At the moment, this behavior gets examined more in depth in lysimeter experiments in cooperation with University of Technology Berlin.
The focus of KWB is the Life Cycle Assessment (LCA) of different NextGen fertilizers to evaluate the entire process chain from recovery to fertilizer application. The NextGen fertilizer is credited by the amount of plant available nutrients in the product, which replace nutrients from conventional fertilizer. The LCA covers N-struvite precipitation from municipal wastewater, K-struvite precipitation from industrial wastewater and the AshDec-product from sewage sludge. The LCA task is almost complete. It could be shown that struvite precipitation has comprehensive environmental benefits, mainly since positive side effects occur in sewage sludge treatment (e.g. reduced sludge volume). In principle, the energetic and ecological profile of the AshDec process compared to direct use of sewage sludge ash cannot be assessed as being generally beneficial or negative. Regarding the global warming potential, the Ashdec process shows that the expenses (e.g. energy, chemicals) cannot be covered by the P fertilizer credit. In contrast, the impact categories “terrestrial acidification potential”, and “freshwater eutrophication potential” show positive results as the credits for conventional fertilizer are higher than the burdens for the process.
At University Bonn, the standardized pot experiments were conducted with several AshDec variations, using ryegrass, soybean, and spinach on a slightly acidic sandy soil and an organic-free standard substrate. P-uptake and biomass production of different AshDec variations were generally like those of triple super phosphate and struvite, and clearly outperformed untreated sewage sludge ash and rock phosphate. Field trials in Australia and Brazil with sugarcane on acidic soils are still ongoing and results are expected by the end of 2021.
This report gives technological information about processes for the recovery of phosphorus from sewage sludge ash including mass- and energy balance, process conditions and product quality.
The information in this report aim at giving an overview on different concepts for the recovery of phosphorus from sewage sludge ash and are intended to allow a general qualitative comparison between the different technical approaches. This report also describes the technological backgrounds of the processes that were furthermore investigated by life cycle assessment (LCA) and life cycle cost (LCC) analysis. However, most process data stated in this report are site specific data. The LCA/LCC study includes the definition of a common base line for all processes, detailed process modeling and plausibility assessments. Results of the LCA/LCC-studies are reported in deliverables D9.2 und D10.1.
Complete survey of German sewage sludge ashes - phosphorous and technology metal recovery potential
(2014)
Sewage sludge ashes (SSA) are a possible source for recovery of phosphorous (P) and technology metals. Phosphorous is essential for all animate beings. So far, its sole external source is rock phosphate, which is a finite resource. The EU import dependency on P from regions with high domestic demands or political instabilities is almost complete. Furthermore, rock phosphate often contains high amounts of heavy metals like Cd and U that might lead to health and environmetal hazards. P recovered from SSA might diminish these problems. We analyzed SSA from German mono incineration facilities in terms of their elemental composition and respective recovery potential. More than 97% of the emerging SSA is monitored, enabling the determination of complete mass flows of the ashes and their components. Results indicate a P recovery potential of 19,000 t/a (more than 12% of the annual P demands for fertilizer production). The concentrations of Cd and U in SSA are significantly lower than in rock phosphate and thus might help to reduce possible envrionmental and health hazards.
Complete Survey of German Sewage Sludge Ashes - Phosphorous and Technology Metal Recovery Potential
(2014)
The environmental concerns about availability of fossil fuels and greenhouse gas effect increase and alternative renewable fuels for power plants are gaining significantly of importance. One of the alternative renewable fuels is biomass but it is a difficult fuel because of its diversity and complexity. It can contain high percentages of K and Cl responsible for corrosion together with sand that have additionally an abrasive effect during combustion. Because of permanently extending the surface reaction due to abrasion the corrosion of the materials increases. In particular in power plants, the superheater tubes are exposed to a corrosive abrasive attack that is one of the main sources of concern. The development of new alloys for multilayer surface, which combines corrosive and abrasive resistance is therefore of high importance. Those new technical approaches must be at the same time cost-effective to be an alternative to conventional materials. This paper presents the principle of experimental methods developed for the investigations of high temperature corrosion combined with abrasion in thermochemical processes with high hydrochloric acid concentrations like during biomass combustion. The aim of the presented investigation methods it to test and develop suitable alloys for coatings for the super heater tubes of biomass power plants. First results of abrasion investigations show improved abrasion resistance compared to the multi-component reference material Alloy 625.
Über den derzeitigen und zukünftigen Umgang mit Klärschlamm wird in Deutschland seit Jahren kontrovers diskutiert. Zum einen enthalten kommunale Klärschlamme Nährstoffe, die sinnvoller Weise wieder in die landwirtschaftliche Nahrungsmittelproduktion eingebracht werden sollten. In diesem Zusammenhang steht Phosphor im Vordergrund, da diese Ressource begrenzt ist und deren zukünftig zu erwartende Knappheit neben der geringen Anzahl an Exportländern für Rohphosphate zu unberechenbaren Preissprüngen am Weltmarkt führen können. Zum anderen stellt Klärschlamm die Schadstoffsenke in der Abwasserreinigung dar, was den direkten landwirtschaftlichen Einsatz dieses Abfalls bedenklich macht. Zwar nahm die Konzentration der umweltrelevanten Schwermetalle in Klärschlämmen in den vergangenen Jahren deutlich ab (Wiechmann, Dienemann et al. 2012), die Belastung mit organischen Schadstoffen (z.B. Pharmazeutika, endokrin wirksame Substanzen, persistente organische Stoffe etc.) ist jedoch unüberschaubar und dürfte sich einem sinnvollen „Monitoring“ weitgehend entziehen. Das daraus resultierende Risiko für Mensch und Umwelt ist schwer einschätzbar und wird aufgrund der Beschaffenheit der diffusen Schadstoffquellen (z.B. Eintrag von Pharmaka und deren Metabolite über menschliche Ausscheidungen) unkalkulierbar bleiben.
Determination of P-Fertiliser-Soil Reactions by Raman and Synchrotron Infrared Microspectroscopy
(2012)
Die agronomische Effizienz von Düngemitteln wird üblicherweise in Vegetationsversuchen geprüft. Diese erlauben die es, unterschiedliche Kulturpflanzen und deren Strategien der Nährstoffmobilisierung und -aneignung zu betrachten und verschiedene Substrattypen und deren Eigenschaften im Hinblick auf Nährstofffixierung und -freisetzung zu berücksichtigen. Solche Versuche, selbst wenn sie nicht im Feld, sondern nur im Gefäß durchgeführt werden, sind jedoch sowohl zeit- als auch kostenintensiv. In erster Näherung wird die Pflanzenverfügbarkeit insbesondere von Phosphor (P)-Düngemitteln daher in der Regel mit Hilfe standardisierter chemischer Extraktionsmethoden abgeschätzt, deren Durchführung in der deutschen ebenso wie in der europäischen Düngemittelverordnung normiert ist. Diese Methoden werden auch bei der staatlichen Düngemittelverkehrskontrolle genutzt, um zu überprüfen, ob die düngemittelrechtlichen Vorgaben eingehalten werden. Wie jüngere Arbeiten gezeigt haben, ist es jedoch schwierig, herkömmliche Standardextraktionsmethoden auf neue Dünger aus Recyclingmaterialien wie Klärschlamm zu übertragen. Korrelationen zwischen P-Aufnahme im Vegetationsversuch und chemischer Löslichkeit im Standardextrakt sind oft nur mäßig bis schwach oder überhaupt nicht signifikant. Die vorliegende Literaturübersicht gibt einen Überblick zum aktuellen Stand des Wissens über die chemische Löslichkeit von klärschlammbasierten P-Recyclingdüngern, deren Effizienz im Vegetationsversuch und statistische Relationen zwischen beiden Parametern. Anschließend werden alternative Methoden zur Abschätzung der P-Verfügbarkeit von Recyclingdüngern vorgestellt, die derzeit Gegenstand der wissenschaftlichen Diskussion sind.
Sewage sludge has one of the highest phosphorus (P) recovery potentials of all waste materials.
Therefore, P-recycling from sewage sludge could contribute to closing the P-cycle. Recently, various thermal processes for P-recovery have been developed, but there is still a demand for information on the effect of different process parameters (e.g. additives and temperature) on P-speciation and especially on the fertilization performance. In the present study, two common methods (low-temperature conversion at 400–500° C and thermochemical treatment at 950° C) were investigated and combined to produce highly bioavailable P-fertilizers from two different types of sewage sludge based on chemical phosphorus precipitation (Chem-P) and enhanced biological phosphorus removal (Bio-P). The results of P-fractionation, X-ray diffraction analysis, and pot experiments with maize showed that Bio-P sludges attain high P-plant-availability after treatment at low temperatures (400° C). In contrast, Chem-P sludges can adequately be treated at higher temperatures under reductive conditions with sodium additives to form highly bioavailable calcium-sodium-phosphate. Additionally, also highly heavy-metal contaminated sludges can be thermochemically treated at high temperatures to achieve the legal requirements for fertilizers.