Filtern
Erscheinungsjahr
Dokumenttyp
Referierte Publikation
- ja (38) (entfernen)
Schlagworte
- Concrete (6)
- Baustoffe (5)
- Rheology (5)
- UHPC (4)
- Versuche (4)
- AKR (3)
- Alkali-silica reaction (3)
- Durability (3)
- Hochleistungsbeton (3)
- Acoustic emission (2)
- Alkali-Kieselsäure-Reaktion (2)
- Automated expansion measurement (2)
- Betontechnologie (2)
- Cement paste (2)
- Damage analysis (2)
- Degradation (2)
- Korrosion (2)
- Microstructure (2)
- Mineral additions (2)
- Mixture composition (2)
- Polycarboxylate (2)
- Polycarboxylate ether (2)
- Portland cement (2)
- Self-compacting concrete (2)
- Stabilising agent (2)
- Starch ether (2)
- Superplasticizer (2)
- Thermal treatment (2)
- 60 °C-Betonversuch (1)
- ASR (1)
- ASR damage (1)
- ASR modelling (1)
- Accelerated concrete prism test (1)
- Accelerated testing (1)
- Acoustic emissions analysis (1)
- Adsorption (1)
- Alkali silica reaction (1)
- Alkali–silica reaction (1)
- Allgemeines (1)
- Anti-Graffiti (1)
- Anti-graffiti agent (1)
- Auslaugung (1)
- Autogenes Schwinden (1)
- Automatische Dehnungsmessung (1)
- BOFS (1)
- Baustoff (1)
- Behandlungsparameter (1)
- Betonfahrbahndecken (1)
- Biofilm (1)
- Biopolymers (1)
- Bioreceptivity (1)
- Brandschutz (1)
- Brick (1)
- Building Materials (1)
- Building and Construction (1)
- Cement (1)
- Cement hydration (1)
- Cementitious materials (1)
- Chloride attack (1)
- Cleaning efficacy (1)
- Climate simulation concrete prism test (1)
- Coarsely dispersed systems (1)
- Compatibility (1)
- Compressive strength (1)
- Computed tomography (1)
- Computertomographie (1)
- Concentration (1)
- Concrete (E) (1)
- Concrete Prism Test at 60 °C (1)
- Concrete pavement (1)
- Concrete rehabilitation (1)
- Cultural Heritage (1)
- Cyclic loading (1)
- Degradation (C) (1)
- Desiccation (1)
- Developing building materials (1)
- Diutan gum (1)
- EDX (1)
- Elevated temperatures (1)
- Environmental conditions (1)
- Ettringit (1)
- External alkalis (1)
- Fahrbahn (1)
- Fahrbahndeckenbetone (1)
- Fast measurement (1)
- Fatigue loading (1)
- Festigkeitssteigerung (1)
- Fire Spalling (1)
- Fließmittel (1)
- Flow of concrete (1)
- Flow of mortar (1)
- Forschung und Entwicklung (1)
- Fracture energy (1)
- Fresh concrete (A) (1)
- Frischbetoneigenschaften (1)
- General Materials Science (1)
- Graffiti (1)
- Green facades (1)
- HRWRA (1)
- Haltezeit (1)
- High performance concrete (1)
- High resolution (1)
- High strength concrete (1)
- Holistic concept (1)
- Hydratation (1)
- Hydration products (1)
- Hydrogarnet (1)
- Hydrothermal treatment (1)
- Hydroxylellestadite (1)
- In-situ (1)
- Ionentransport (1)
- Laser-induced breakdown spectroscopy (1)
- Leaching of alkalis (1)
- Limestone (1)
- Materials characterisation (1)
- Mechanische Vorschädigung (1)
- Messtechnik (1)
- Micro cracks (1)
- Micro-Crack (1)
- Microcracks (1)
- Mikromechanik (1)
- Mikrorisse (1)
- Mischungsentwurf (1)
- Mitigation strategies (1)
- Modeling (E) (1)
- Modellierung (1)
- Monitoring (1)
- Monitoring of damage (1)
- Nachhaltigkeit (1)
- Nanotechnologie (1)
- Non-destructive testing (1)
- PP-Fasern (1)
- Pavement concrete (1)
- Performance (1)
- Permeability (C) (1)
- Phase development (1)
- Polymer cement concrete (PCC) (1)
- Polypropylen-Fasern (1)
- Polypropylene Fibres (1)
- Polypropylene fibers (1)
- Polypropylene fibres (1)
- Polysaccharides (1)
- Porenstruktur (1)
- Portland cement Initial hydration (1)
- Praxis (1)
- Preparation of thin sections (1)
- Prüfmethoden (1)
- Rasterelektronenmikroskopie (1)
- Repair mortar (1)
- Repair systems (1)
- Rheologie (1)
- Rheology (A) (1)
- Risse (1)
- Road pavement (1)
- Robustheit (1)
- Robustness (1)
- Sample holder (1)
- Scanning electron microscopy (1)
- Schallemissionsanalyse (1)
- Schädigende AKR (1)
- Secondary aggregates (1)
- Secondary materials (1)
- Selbstverdichtender Beton (1)
- Self-consolidating concrete (1)
- Setting (1)
- Simulation (1)
- Spatial analyses (1)
- Sphingan (1)
- Sprayed polymer cement concrete (SPCC) (1)
- Stabilising agents (1)
- Stabilizer (1)
- Starch (1)
- Stofftransport (1)
- Stone (1)
- Straßenbeton (1)
- Structural fire protection (1)
- Sulfate attack (C) (1)
- Sulphate attack (1)
- Sulphate-chloride attack (1)
- Surface interactions (1)
- Sustainability (1)
- Sustainable evaluation (1)
- Synchrotron (1)
- Temperatur (1)
- Temperature (1)
- Tensile strength (1)
- Thermal analysis (1)
- Tobermorite (1)
- Transient strain (1)
- Transport process (1)
- Transportprozesse (1)
- Ultra-Hochleistungsbeton (1)
- Ultrahigh-performance concrete (UHPC) (1)
- Ultrasonic velocity (1)
- Ultrasound (1)
- Vorlagerungszeit (1)
- Vorschädigung (1)
- Wärmebehandlung (1)
- X-Ray diffraction (1)
- X-ray diffraction (1)
- X-ray diffraction (B) (1)
- X-ray diffraction (XRD) (1)
- XRD (1)
- Yield stress (1)
- Zonation (1)
- Zonierung (1)
- Zyklische Belastung (1)
- end-of-life phase (1)
- masonry (1)
- sustainability (1)
- zyklische Belastung (1)
- Äußere Alkalizufuhr (1)
Organisationseinheit der BAM
Paper des Monats
- ja (1)
Auf Grundlage der Zielsetzung der Forschergruppe 1498 beschäftigt sich dieser Beitrag mit den Auswirkungen einer zyklischen mechanischen Belastung im Vierpunktbiegeversuch auf das Transportverhalten in Betongefüge. Hierzu wurde zunächst die Degradation des Mikrogefüges mittels Ultraschallmessungen sowie rissmikroskopischen Untersuchungen an Dünnschliffen charakterisiert. Mit dem Ziel der numerischen Modellbildung wurden Untersuchungen zum Wassereindringverhalten durchgeführt. Es wurden u. a. das Wassereindringverhalten über die Zeit und der Einfluss von Vorschädigungen experimentell geprüft. Basierend auf den gewonnenen Erkenntnissen zu den Einzelprozessen des Ionentransports in poröses Gefüge wurde ein mikromechanisches Mehrskalenmodell entwickelt, welches es ermöglicht, die Wirkung der Vorschädigung auf gekoppelte Feuchte- und Ionentransportprozesse vorherzusagen. Das Modell berücksichtigt die Topologie und räumliche Verteilung der Mikrorisse und deren Einfluss auf die Ionendiffusivität. Die numerische Simulation liefert bei anisotroper Verteilung der Mikrorisse eine erhöhte Alkali-Eindringtiefe. ----------------------------------------------------------------------------------------------------------------------------------
According to the goals of the research group 1498, this paper deals with the effects of cyclic flexural loading in a four-point bending test on the fluid transport processes within a concrete structure. Therefore, the degradation of the microstructure is characterized through ultrasonic wave measurements as well as microscopic crack analysis. In order to numerically model these processes, experiments on the penetration behavior of water into the concrete were carried out. The penetration behavior over time as well as the influence of degradation on the water transport were investigated. To predict the influence of concrete degradation on alkali diffusivity, a multi-scale continuum micromechanics model is incorporated into the numerical model, which accounts for the topology and the three-dimensional distribution of microcracks. As expected, the numerical simulation predicts larger alkali-penetration in pre-damaged concrete. Regarding the micro-crack distribution, an anisotropic distribution of micro-cracks tangential to the direction of the alkali and water flux increases their penetration depth.
In Betonbauteilen unter gleichzeitiger zyklischer Beanspruchung und externer Alkalizufuhr ist die Gefahr von Schäden infolge oder unter Mitwirkung einer Alkali-Kieselsäure-Reaktion (AKR) besonders hoch. Dies betrifft insbesondere Fahrbahndecken, bedingt durch den zunehmenden Schwerlastverkehr und den winterlichen Auftrag des Enteisungsmittels NaCl. Speziell die Rolle einer mechanischen Vorschädigung des Betons infolge der Verkehrsbeanspruchungen auf den Ablauf einer AKR ist dabei aber noch nicht in ausreichendem Umfang geklärt. Ein Teil der dazu seit 2012 durchgeführten Untersuchungen im Rahmen der DFG-Forschergruppe 1498 soll im Folgenden vorgestellt werden. Es zeigte sich, dass eine AKR in definiert mechanisch vorgeschädigten Betonprobekörpern mit alkalireaktiven Gesteinskörnungen und unter äußerer Alkalizufuhr vor allem früher beginnt als in äquivalenten Probekörpern ohne Vorschädigung. Grund dafür ist das schnellere und tiefere Eindringen von Wasser und insbesondere gelöstem NaCl in den Beton, wodurch Na-Ionen als Reaktionspartner für eine AKR früher und langfristig auch in größerer Menge verfügbar sind.------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
In concrete elements, simultaneously subjected to cyclic loadings and external alkalis, the risk for damages caused by or under participation of an alkali-silica reaction (ASR) is particularly high. This concerns especially concrete pavements due to the increasing heavy load traffic and the wintry application of NaCl deicer. Notably the role of a mechanical pre-damage of concrete caused by traffic loadings on the course of the ASR is largely unclear. A part of the investigations that has been conducted since 2012 into this issue within the scope of the DFG (German research foundation) funded research group 1498 shall be introduced in the following. It was evident that an ASR in defined mechanically pre-damaged concrete prisms with alkali-reactive aggregates and under an external supply of alkalis started earlier than in equal prisms without a pre-damage. The reason for this is the faster and deeper ingress of water and particularly of dissolved NaCl into the concrete, by what Na ions as reaction partner for an ASR are available earlier and, in the long-term, in greater amounts too.
This paper presents the results of an
experimental study on the transient strain of high
strength concrete (HSC) under heating up to 750 °C
and the impact of polypropylene (PP) fibers. Concerning
this topic only few results are available in the
literature and systematic investigations are missing.
However, basic knowledge is necessary for the
understanding of the internal damage processes in
the material as well as for heated structures. The
transient strain during heating can be separated in two
basic components: the free thermal strain and the
mechanical strain. They were experimentally determined
exemplarily for one HSC. For the determination
of the mechanisms of transient strain and particularly
the influence of PP fibers different techniques were
applied. In this context the monitoring of the microcracking
was done for the first time with acoustic
emission analysis in combination with ultrasonic
measurements. This new approach helps fundamentally
to explain the impact of PP fibers on free thermal
strain and mechanical strain during heating up.
Furthermore weight loss measurements were carried
out to characterize the moisture transport. It was
shown that the PP fibers cause an acceleration of the
moisture transport in the temperature range from 200
to 250 °C which leads to drying shrinkage in opposite
direction to the free thermal strain. Hence this paper is
a contribution to the general understanding of the
impact of PP fibers in HSC at high temperatures and
emphasizes the important influence of PP fibers on the
thermal and mechanical induced strain of HSC.
Time-resolved in situ investigation of Portland cement hydration influenced by chemical admixtures
(2016)
Numerous admixtures are used in the building practice to customize the properties of the cement paste during application. The influences of admixtures on the course of cement hydration and formation of hydrate phases have to be considered. Polycarboxylate ether (PCE) based polymeric superplasticizers (SPs) are known to retard the setting of the cement paste. The extent of the retardation differs depending on the molecular structure of the SP. Additionally, the presence of a stabilizing agent (SA) in the cement paste has a retarding side effect on the setting. The initial cement hydration processes and the detailed mechanisms of the retardation influenced by PCEs, as well as their interactions with particular SAs, are insufficiently understood. Up to now, only the results of phenomenological studies were taken into account to describe this retardation process. A detailed structure analysis monitoring the change of the phase composition during the hydration was never applied. Both SP and SA affect the adsorption of the sulphate ions on the clinker particles, causing changes in the formation of ettringite during the initial hydration, and are therefore a crucial part of the setting process itself. Here, the initial hydration of cement influenced by the interaction of SP and SA was monitored in situ by synchrotron X-ray diffraction. The high time resolution of the measurements allowed a continuous detection of the hydrates formed. The hydration was followed from the starting point of water addition and for couple of hours afterwards. The hydration of the levitated cement pellets containing starch as SA was initialized by adding aqueous solutions of different commercial SPs. Changes in the ettringite formation were detected in comparison to the reference hydration of pure cement.
Several studies show that thermal and hydrothermal treatment can further improve the excellent properties of UHPC in terms of mechanical strength and durability. While for the thermal treatment the increase in strength is attributed to an intensified pozzolanic and hydraulic reaction, for the hydrothermal treatment previous studies accredited it mostly to the formation of tobermorite. In the presented study thermal and hydrothermal treatment of UHPC samples was systematically varied and the phase formation analysed related to the strength development of a reference sample cured for 28 days in water. For the thermal treatment the results show that the strength increase depends on the protection against desiccation and can be ascribed to an improved pozzolanic reaction of the siliceous fillers. To achieve a significant enhancement of strength, a pre-storage time of few days and a long dwell time at elevated temperature/pressure are required. For the hydrothermal treatment already heating the specimens up to 185 °C in saturated steam followed by an immediate cooling leads to a substantial increase in compressive strength. Pre-storage time did not affect the result as far as a minimum of several hours is guaranteed. The improved performance is due to an increase in the pozzolanic and hydraulic reaction. Surprisingly, tobermorite was only found within a very thin layer at the surface of the sample, but not in the bulk. Sulphate and aluminium stemming from the decomposition of the ettringite are bound in the newly formed phases hydroxylellestadite and hydrogarnet.
Polysaccharides provide high potential to be used as rheology modifying admixtures in mineral binder systems for the construction industry such as concrete or mortar. Since superplasticizers have become state of technology, today, concrete is more and more adjusted to flowable consistencies. This often goes along with the risk of segregation, which can be effectively avoided by adding stabilising agents supplementary to superplasticizers. Stabilising agents are typically based on polysaccharides such as cellulose, sphingan gum, or starch. Starch clearly distinguishes in its effect on rheology from other polysaccharides, mainly due to the strong influence of amylopectin on the dispersion and stabilisation of particles. Based on rheometric investigations on cementitious and limestone based dispersions with different volumetric water to solid ratios, the mode of operation of modified potato starch is explained in comparison to a sphingan gum. It is shown that the stabilising effect of starch in a coarsely dispersed system is mainly depending upon the water to solid ratio and that above a certain particle volume threshold starch mainly affects the dynamic yield stress of dispersions, while plastic viscosity is affected only to a minor degree. Sphingans operate more independent of the particle volume in a coarsely dispersed system and show significantly higher effect on the plastic viscosity than on the yield stress. In systems incorporating superplasticizers, influences of both stabilising agents on yield stress retreat into the background, while both observed polysaccharides maintain their effect on the plastic viscosity.
Basic oxygen furnace slags (BOFS) are by-products of the steelmaking process. Several researchers have studied the production of Portland cement clinker and metallic iron from BOFS via a reductive treatment.
In this study, we applied a carbothermal reduction of BOFS in a technical-scale electric arc furnace and characterised the clinker-like products. Those clinker-like non-metallic products (NMPs) had a chemical and mineralogical composition comparable to clinker for ordinary Portland cement (OPC) and contained large elongated alite crystals as major component. The pure NMPs reacted more slowly and achieved a lower degree of hydration compared with commercial OPC.
If the reactivity of the products can be further increased by employing specific adaptations, it can be used as a full clinker substitute for OPC. Nevertheless, it is also an option to use the material without further modifications as a cement component or concrete addition, which contributes to the strength development in both cases.
Powder X-ray diffraction is a time-consuming and challenging task, especially for preparation of sensitive phases like ettringite and calcium-silicate-hydrate (C-S-H) phases. Fine-grained ultrahigh-performance concrete (UHPC) with an average grain size <100 μm could be investigated directly without time-consuming milling. As a proof of concept, small UHPC cylinders with plain surfaces were investigated with a newly designed sample holder. The comparison with conventionally prepared powder shows the feasibility of fast qualitative phase analysis using this approach. As a great benefit, a depth-dependent analysis, as well as a comparison of surface layers and core material, was carried out.
Though, concrete in general is a non-combustible building material, modern High Performance Concrete (HPC) is very susceptible to violent explosive spalling during a fire attack. This requires protective measures for fire safety design of concrete structures. The current most worthwhile method to prevent explosive spalling is the addition of monofilament Polypropylene fibres (PP-fibres). However, since it has become common knowledge that PP-fibres are suitable for fire safety design, a variety of theories concerning the mode of action of PP-fibres have been suggested. The present article summarizes the most important hypothesis and presents an innovative method for the analysis of micro structural processes in heated specimens. The results show that due to the thermal decomposition of PP-fibres capillary channels are created. Simultaneously, a netlike micro crack formation occurs, which connects these capillary channels. This enables the relief of internal stresses (mechanical effect) and the formation of a permeable transport system for the escaping water vapour (permeation effect).
Bauteile bzw. Tragwerke aus Hochleistungsbetonen müssen in der Regel gegen brandinduzierte Abplatzungen mit geeigneten Maßnahmen geschützt werden, um einen ausreichenden Feuerwiderstand im Brandfall zu gewährleisten. Die bisher wirtschaftlich und technologisch sinnvollste Methode zur Verhinderung von explosionsartigen Betonabplatzungen im Brandfall ist die Zugabe von Polypropylen-Fasern. Die Wirksamkeit der Fasern konnte zwar empirisch gezeigt werden, es stellt sich allerdings die Frage, welche Mechanismen zur Verhinderung der Abplatzungen führen. Der vorliegende Beitrag fasst bisherige Theorien zur Wirkungsweise von Polypropylen-Fasern in brandbeanspruchten Hochleistungsbetonen zusammen und stellt eine innovative Methodologie zur Erforschung der mikrostrukturellen Prozesse vor. Die Ergebnisse zeigen, dass die nach dem Schmelzen und Zersetzen der Polypropylen-Fasern frei werdenden Mikrokanäle durch eine gleichzeitig einsetzende Mikrorissbildung netzartig verbunden werden. Die Mikrorissbildung ermöglicht somit den Abbau von Eigen- und Zwangsspannungen im Beton (mechanischer Effekt) und die Entstehung eines Transportwegesystems für den ausströmenden Wasserdampf (Permeationseffekt).--------------------------------------------------------------------------- Structural members and bearing structures of high performance concrete generally have to be protected against explosive spalling due to fire exposure to guarantee a sufficient fire resistance. Up to now, the economically and technologically most worthwhile method to prevent explosive spalling is the addition of polypropylene fibres. Though the effectiveness of the fibres could be shown empirically, the mechanisms preventing explosive spalling are still debatable. The present article summarizes the existing theories concerning the mode of action of polypropylene fibres in fire exposed high performance concretes and presents an innovative methodology for analysing the micro structural processes. The results show that due to the thermal decomposition of the polypropylene fibres micro channels are created and simultaneously connected due to a netlike micro crack formation. This enables the relief of internal stresses (mechanical effect) and the formation of a permeable transport system for the escaping water vapour (permeation effect).