Filtern
Erscheinungsjahr
Dokumenttyp
- Beitrag zu einem Tagungsband (19) (entfernen)
Schlagworte
- Analyse (2)
- Bewertung (2)
- Digitale Detektoren (2)
- Image quality (2)
- POD (2)
- Röntgen (2)
- Schweißnähte (2)
- TomoCAR (2)
- Tomographie (2)
- Zerstörungsfreie Prüfung (2)
Organisationseinheit der BAM
Speicherfoliensysteme werden seit den 80-iger Jahren in der Röntgendiagnostik
eingesetzt. Die technische Modifizierung der anfänglich im medizinischen Bereich
genutzten Speicherfoliensysteme ermöglichte die Einführung der Computer-Radiographie
(CR) in die Digitale Industrielle Röntgenprüfung mit dem Ziel des Filmersatzes. Die Speicherfolien
detektieren im Vergleich zum Röntgenfilm einen wesentlich größeren
Dosisbereich. Die daraus resultierende Dynamik befähigt die Speicherfoliensysteme zur
Abbildung eines großen Objektumfanges und verringert zugleich das Risiko einer Fehlbelichtung.
Vor allem die Möglichkeit, unmittelbar nach dem Belichten das virtuell im Speicherleuchtstoff
gespeicherte Durchstrahlungsbild auszulesen, in digitalisierter Form im PC
zu speichern und auf dem Bildschirm betrachten zu können, verdeutlicht die Vorteile von
CR Systemen beim Gebrauch in der Durchstrahlungsprüfung. Eine vollständige Ablösung
des Röntgenfilmes durch digitale Techniken ist jedoch erst dann zu erwarten, wenn es gelingt,
eine Bildqualität zu erreichen, die besser oder gleichwertig zu der vom jeweiligen
Röntgenfilmsystem geforderten ist. Mit diesem Ziel hat in den letzten Jahren eine technische
Weiterentwicklung von CR Systemen für den industriellen Einsatz stattgefunden. Im
gleichen Zeitraum wurden mehrere Standards zur Bewertung von CR Systemen und zu
deren richtigen Gebrauch in der Durchstrahlungsprüfung entwickelt.
Heutzutage ist die Herstellung von Durchstrahlungsbildern mit einer entsprechend gewünschten
Bildgüte sichergestellt, was in den letzten Jahren zum verstärkten Einsatz von
CR Systemen in der Durchstrahlungsprüfung führte.
Im Rahmen einer von der EU finanzierten Studie (Filmfree) wurden anfänglich systematische
Untersuchungen zu den Einsatzmöglichkeiten und grenzen von CR Systemen für die
Durchstrahlungsprüfung von aluminothermischen Schweißnähten in Schienen durchgeführt.
Anhand der Ergebnisse ließen sich optimale Bedingungen und Strategien für die Durchstrahlungsprüfung
von Schienen ableiten, die anschließend im vor Ort Einsatz auf der
Teststrecke der Deutschen Bahn verifiziert wurden.
Im vorgestellten Beitrag werden die Vorteile des Einsatzes von CR Systemen bei der
Durchstrahlungsprüfung von aluminothermischen Schweißnahtverbindungen dargestellt
und deren Verwendung unter realen Verkehrsbedingungen im Schienenverkehr beschrieben.
Es wird gezeigt, wie unter den bestehenden Fahrbetriebsbedingungen die Durchstrahlungsprüfung
von Schweißungen in verlegten Schienen umgesetzt werden kann.
Grouting defects, e.g. in post-tensioned structures or piped anchors may be identified by ultrasonic imaging. Since several years experiences are carried out with false color displayed phase values, which enable distinct localization of ungrouted regions.
In this contribution we report on progress in localizing grouting defects in tendon ducts, when they are only partly grouted and the unfilled part is not orientated into the direction of the measuring surface. This is frequently the case e.g. for box girder structures.
Düring the project specimens containing different types of grouting faults are investigated in Order to optimize measuring and evaluation techniques. A handheld linear array System (commercially available) is applied for fast 2D-measurement and subsequent phase sensitive 3D-imaging (new Software development).
In a large concrete wall specimen tendon ducts and real prestressing Systems containing grouting defects were built in. The ducts are partly covered by non prestressed reinforcement bars in order to investigate its disturbing influence. These included objects were investigated afterwards with the described methods. We report on large area measuring results, which were partly verified by y-radiography. In the frame of practical application results of measuring the position and extend of a blockade within a posttensioned structure are presen ted.
Zur Durchstrahlung großer, dichter Objekte reichen die Energien, die mit normalen Röntgenröhren erzielt werden können, ab gewissen Schichtdicken nicht mehr aus. Als hochenergetische Strahlenquellen stehen Kobalt-60 und Elektronenbeschleuniger zur Verfügung. Als Einschränkung der Hochenergieradiographie ist der geringere Kontrast besonders beim Vorhandensein leichterer Objekte umgeben von Körpern bestehend aus schweren Elementen anzusehen. Es ist daher zu erwarten, dass Objekte aus organischen Substanzen hinter dicken Schwermetallwänden oder in Bohrungen von Metallblöcken schwer zu erkennen sind. Im Gegensatz zu einem Gammastrahler wie Kobalt-60 mit den beiden Spektrallinien um 1,3 MeV besitzt die Bremsstrahlung aus einem Beschleuniger einen wesentlichen Anteil an niederenergetischer Strahlung, der fließend zu höheren Energien übergeht. Es wird hier untersucht, welche Signaturen von leichten Materialien in einer Umgebung aus Schwermetall bis zu welcher Dicke und bis zu welchem Komplexizitätsgrad erkennbar sind. Mit einem Betatron (JME X-ray Betatron 7,5 MeV) und einem Matrixdetektor (Perkin Elmer XRD 1621) wurden Aufnahmen von unterschiedlichen leichten Objekten angefertigt, die zunehmend in eine Umgebung aus Schwermetallen gestellt wurden. Mit unterschiedlichen Energieeinstellungen wurde untersucht, inwieweit eine Materialerkennung hinter welcher Abschirmung möglich ist. Die experimentellen Ergebnisse werden mit Simulationen verglichen, die mit einer Software zur Modellierung von Durchstrahlungsverfahren (aRTist) erzeugt wurden. Dabei wird dem Problem der Aufhärtung bei Anwendung von Bremsstrahlung Rechnung getragen. Die Ergebnisse können sowohl zur Erkennung von Fremdkörpern in Maschinen oder Pumpen als auch zur Überprüfung von Frachtladungen im Bereich der öffentlichen Sicherheit und bei Zollkontrollen dienen.
Reinforced concrete (RC) is used as structural material in most diverse civil engineering applications. For the variability of its physical properties it is still an engineering challenge to meet all necessary requirements for the prediction of dynamic effects under impact loading. In this paper, investigations are shown within the scope of quantifying and evaluating the damage caused by an impact. The experimental investigations are performed in the field of low- and medium-velocity impact. The chosen flat nose shape results in small penetrations on the top side and scabbing on the bottom side. The plate is scanned with an adapted planar tomographic examination after the impact, and the damage is analysed, afterwards. Cracks and spalling are made visible with a reconstruction. The numerical model validated on the tomographic results justifies the application for further predictions of the damage description.
The structural integrity of outer reinforced concrete (RC) containments of nuclear power plants provides an essential shield against external hazards. If this containment is damaged by an impact event, such as an aircraft crash, the question arises to which degree the reinforced concrete containment still has its protective capability. This concerns both purely structural protection and protection against liquids penetrating the interior of the containment. Due to the dimensions of the containment structures, it is difficult to perform real scale impact experiments, so in the past decades plate geometries at medium scale have been used for investigations. Detailed investigations on the structural behaviour of RC members or RC plates subjected to impact loading have already been presented in Just et al., Hering, Hering et al., Bracklow et al., Hille et al. and Nerger et al.
The following investigations deal with the single and multiple impact event (first hard impact and/or subsequent soft impact) on a RC specimen, which provides the basis for further investigations. A description of the test setup and the test procedure as well as a presentation of the test results from the impact tests are provided.
Furthermore, the experimental program is presented, which the damaged RC specimens are to undergo to deal with the question of how much the impact-damaged RC structure has become permeable to liquid media, such as water and kerosene, depending on the intensity of the impact. The aim of these following investigations is to develop a test setup that can be applied to investigate the liquid penetration behaviour (LPB) of small, medium, and large-scale RC members.
In addition to the liquid penetration experiments, the damaged specimens are to be examined by planar tomography to obtain the damage inside the specimen. The combination of damaging event, fluid penetration behaviour and tomography should enable a comprehensive understanding of the damage to the RC specimen.
The research and development (R&D) in the field of safety and security of sea-freight Containers has gained more importance after the U.S. house resolution 1 (H.R.1). According to this law, all the freight Containers which are transported from non-U.S. port of origin to U.S. ports should be inspected 100% against explosive and contraband materials using non-intrusive imaging equipment and radiation detectors. As the port of Hamburg and Bremerhaven are the leading Container ports in Europe, it is essential to develop reliable and high-resolution detection technologies for the non-destructive inspection of large sea-freight Containers.
One of the most important tasks for in-service weld inspection of Circumferential welds is the detection of planar defects and its sizing. The information about the shape, length and depth of defects like cracks and lack of fusion can be measured quantitatively with a mechanised system for manipulation of X-ray source and line camera. The well adjusted manipulation system allows the testing of pipes with a
diameter between 176 mm and 500 mm. The system is based on several modules, which can be adjusted to the testing problem. The energy of the X-ray tube amounts 225 keV. The pixel resolution of the line camera is 50µm for 2048 pixels per line. The camera and the X-ray tube are separated on the pipe by an angle of 180°. They are moved line by line around the circumference to acquire the radiometric image.
The basic problem of radiography as well as of the radiometric scan technique is the dependence of the measured crack contrast on the radiation direction in relation to the crack location. Only parallel transmission to the crack plane provides sufficient contrast. This requires application of the multi-angle technique. The developed scanner enables modification of the radiation direction. It is possible to set up the system for a special inspection of side wall flaws. Scanning the weld under different angles provides multi -angle projections which improve the probability of detection for planar inhomogeneities in the material like cracks and lack of fusion.
Furthermore, the multi-angle technique provides enough information for a 3D-reconstruction of the weld structure. New methods of digital laminography and tomosynthesis permit the measurement of the shape and depth of the indications.
The developed system, which is applicable for mobile in service inspection, is presented together with the results of the measurement techniques like planar scan, coplanar laminography, tomosynthesis and cross-sectional planar tomography.