Filtern
Dokumenttyp
- Zeitschriftenartikel (15) (entfernen)
Sprache
- Englisch (15) (entfernen)
Schlagworte
- Mechanochemistry (3)
- Affinity chromatography (2)
- Pectin (2)
- Absolute adsorption (1)
- Affinity extraction (1)
- Antibodies (1)
- Azobenzene (1)
- BET specific surface area (1)
- Consolidated materials (1)
- Corundum (1)
Organisationseinheit der BAM
The mechanochemical synthesis of the zinc N-(phosphonomethyl)glycinate Zn(O₃PCH₂NH₂CH₂CO₂) H₂O is presented. The structure was solved from powder X-ray diffraction (PXRD) data. In the three-dimensional pillared structure, the Zn atoms are coordinated tetrahedrally. In situ investigations of the reaction process with synchrotron PXRD and Raman spectroscopy reveal a two-step process including the formation of an intermediate.
Nonporous corundum powder, known as an abrasive material in the industry, was functionalized covalently with protein binders to isolate and enrich specific proteins from complex matrices. The materials based on corundum were characterized by TEM, ESEM, BET, DLS, EDS, and zeta potential measurements. The strong Al-O-P bonds between the corundum surface and amino phosphonic acids were used to introduce functional groups for further conjugations. The common crosslinker glutaraldehyde was compared with a hyperbranched polyglycerol (PG) of around 10 kDa. The latter was oxidized with periodate to generate aldehyde groups that can covalently react with the amines of the surface and the amino groups from the protein via a reductive amination process. The amount of bound protein was quantified via aromatic amino acid analysis (AAAA). This work shows that oxidized polyglycerol can be used as an alternative to glutaraldehyde. With polyglycerol, more of the model protein bovine serum albumin (BSA) could be attached to the surface under the same conditions, and lower non-specific binding (NSB) was observed. As a proof of concept, IgG was extracted with protein A from crude human plasma. The purity of the product was examined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). A binding capacity of 1.8 mg IgG per gram of corundum powder was achieved. The advantages of corundum include the very low price, extremely high physical and chemical stability, pressure resistance, favorable binding kinetics, convenient handling, and flexible application.
In order to identify the best porous materials for the cryogenic physisorption of hydrogen, high-throughput calculations are performed starting, i.e., from the collected information in crystallographic databases. However, these calculations, like molecular simulations, require specific training and significant computational cost. Herein, a relatively simple procedure is proposed to estimate and compare hydrogen uptakes at 77 K and pressure values from 40 bar starting from the porous properties of MOF materials, without involving simulation tools. This procedure uses definitions for adsorption and considers the adsorbed phase as an incompressible fluid whose pressure-density change is that for the liquid phase at 19 K. For the 7000 structures from the CoRE MOF database, the average error of the predictions is only of 1% from reference values at 100 bar, with an SD of ±8%. This accuracy is lower than that from simulation tools, but involving lower computational cost and training.
Porous polymer membranes made via electrostatic complexation are fabricated from a water-soluble poly(ionic liquid) (PIL) for the first time. The porous structure is formed as a consequence of simultaneous phase separation of the PIL and ionic complexation with an acid, which occurred in a basic solution of a nonsolvent for the PIL. These membranes have a stimuli-responsive porosity, with open and closed pores in isopropanol and in water, respectively. This property is quantitatively demonstrated in filtration experiments, where water is passing much slower through the membranes than isopropanol.
CCQM key comparison K-153 Measurement of Specific Adsorption A [mol/kg] of N-2 and Kr on nonporous SiO2 at LN temperature (to enable a traceable determination of the Specific Surface Area (BET) following ISO 9277) has been performed by the Surface Analysis Working Group (SAWG) of the Consultative Committee for Amount of Substance (CCQM). The objective of this key comparison is to compare the equivalency of the National Metrology Institutes (NMIs) and Designated Institutes (DIs) for the measurement of specific adsorption, BET specific surface area) of nonporous substances (sorbents, ceramics, catalytic agents, etc) used in advanced technology.
In this key comparison, a commercial nonporous silicon dioxide was supplied as a sample. Eight NMIs participated in this key comparison, but only five NMI's have reported in time. All participants used a gas adsorption method, here nitrogen and (or) krypton adsorption at 77.3 K, for analysis according to the international standards ISO 15901-2 and 9277.
In this key comparison, the degrees of equivalence uncertainties for specific adsorption nitrogen and krypton, BET specific surface area were established.
A series of new epoxide-based monoliths is synthesized by self-polymerization of polyglycerol polyglycidyl ether as porous support for affinity chromatography. Porosity and mean pore sizes are investigated as a function of the porogen ratio and analyzed by mercury porosimetry. The morphologies are visualized by environmental scanning electron microscope. With a particularly rigid monolith prepared with 75 vol% porogen (66% porosity and 12 µm mean pore size), a capillary column (0.5 mm ID) is prepared and directly functionalized with recombinant protein A to extract immunoglobulin G from rabbit serum.
A two-component core-shell UiO-68 type metal-organic framework (MOF) with a nonfunctionalized interior for efficient guest uptake and storage and a thin light-responsive outer shell was prepared by initial solvothermal MOF synthesis followed by solvent-assisted linker exchange. The bulky shell linker features two tetra-ortho-fluorinated azobenzene moieties to exploit their advantageous photoisomerization properties. The obtained perfect octahedral MOF single crystals can be switched repeatedly and with an unprecedented efficiency between E- and Z-rich states using visible light only. Due to the high photoswitch density per pore of the shell layer, its steric demand and thus molecular uptake (and release) can be conveniently modulated upon green and blue light irradiation. Therefore, the "smart" shell acts as a light-controlled kinetic barrier or "gate" for the diffusion of cargo molecules in and out of the MOF crystals.
There is currently a debate within the SIP community about the characteristic textural length scale controlling relaxation time of consolidated porousmedia.One idea is that the relaxation time is dominated by the pore throat size distribution or more specifically the modal pore throat size as determined in mercury intrusion capillary pressure tests. Recently new studies on inverting pore size distributions from SIP data were published implying that the relaxation mechanisms and controlling length scale are well understood. In contrast new analytical model studies based on the Marshall-Madden membrane polarization theory suggested that two relaxation processes might compete: the one along the short narrow pore (the throat) with one across the wider pore in case the narrow pores become relatively long.
This paper presents a first systematically focused study into the relationship of pore throat sizes and SIP relaxation times. The generality of predicted trends is investigated across a wide range of materials differing considerably in chemical composition, specific surface and pore space characteristics. Three different groups of relaxation behaviors can be clearly distinguished. The different behaviors are related to clay content and type, carbonate content, size of the grains and the wide pores in the samples.
Zeolite synthesis was studied using two silica rich filtration residues (FR 1 and FR 2) as Si-source
and sodium aluminate in a direct synthesis at 60°C at strong alkaline conditions (8 M - 16 M NaOH).
In addition to these one-pot syntheses, a two-step process was investigated. Here, an alkaline digestion
of FR at 60°C was followed by gel precipitation with sodium aluminate and gel crystallization
under usual conditions of 80°C - 90°C. The results show that the substitution of chemical
reagent sodium silicate by a waste material like FR as Si-source is possible but requires fine tuning
of the reaction conditions as zeolite crystallization is a process under kinetic control. The
solubility behaviour and impurities of the inserted filtration residues strongly influenced the
course of reaction. Thus zeolites like hydrosodalite or intermediate zeolite between cancrinite
and sodalite, or zeolite NaA or Z-21 in cocrystallization with hydrosodalite could be observed in
the one pot syntheses already in a short time interval between 1 - 4 h depending on the alkalinity.
The two step process yield to zeolites NaA and NaX in very good quality. The reaction process of FR
in both reaction methods was characterized by chemical analyses, X-ray powder diffraction,
Fourier transform infrared spectroscopy as well as scanning electron microscopy. Surface area
and water content of selected products were further characterized by the BET-method and by
thermogravimetry. Summing up the results, we can show that zeolite formation from filtration residues
is possible by several reaction procedures as model cases for a re-use of industrial waste
materials. Beside the importance for environmental protection, the reactions are of interest for
zeolite chemistry as the re-use of FR is possible under economically conditions of low energy consumption
at 60°C and short reaction periods.
Aim of the present study was to investigate the effect of the method of demethoxylation on the particle structure and techno-functional properties of pectins with different degree of methoxylation and distribution of free carboxyl groups. Two groups of model pectins, one with 57% and one with 42% degree of methoxylation have been prepared from one single commercial pectin. Modifications were performed by an acidic and two enzymatic methods using fungal and plant-derived pectin methyl esterases. Thermal stability was investigated by thermal analysis and water uptake was determined by a sorption and a capillary sucking method.
The enzyme-treated pectins were thermally less stable than the acid-treated. The water uptake of enzyme-treated pectins was higher than in acid-treated samples in the sorption method and lower in the capillary sucking tests. The different behaviour is explained by differences in pH during demethoxylation and a co-occurring variation in sodium content. Both parameters affected intermolecular interactions of the pectin macromolecules in solution, which resulted in differences in the particle morphology. The effect of the distribution of free carboxyl groups (statistical or block-wise) on the techno-functional properties was more pronounced in high-methoxylated pectins than in low-methoxylated pectins.