Filtern
Dokumenttyp
- Beitrag zu einem Tagungsband (8)
- Zeitschriftenartikel (4)
- Vortrag (3)
- Beitrag zu einem Sammelband (2)
- Handbuch (1)
Schlagworte
- Beton (3)
- SBFEM (3)
- Zerstörungsfreie Prüfung (3)
- Zerstörungsfreie Prüfung im Bauwesen (3)
- Automatisierung (2)
- Civil engineering (2)
- Non-destrucive testing (2)
- Non-destructive testing (2)
- Procedure (2)
- Quality assurance (2)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (3)
Eine zentrale Aufgabe der zerstörungsfreien Prüfung und der Strukturüberwachung (engl. Structural Health Monitoring - SHM) mit Ultraschallwellen ist die Bewertung von Schäden in Bauteilen. In vielen Bauteilen, wie zum Beispiel platten- und schalenförmigen Strukturen, Rohrleitungen oder Laminaten, breitet sich der Ultraschall in Form geführter Wellen aus. Zwar haben geführte Wellen eine relativ große Reichweite innerhalb des Bauteils und ermöglichen so eine großflächige Prüfung, ihre multimodalen und dispersiven Eigenschaften erschweren jedoch die Analyse der vom Schaden kommenden Reflexionen. Eine Möglichkeit, die Messsignale zu interpretieren und die Schäden zu charakterisieren, ist deren Vergleich mit der Wellenausbreitung in einem digitalen Modell. Hierbei stellt sich die Aufgabe, den Schaden im digitalen Modell anhand der Messdaten zu rekonstruieren. Diese Rekonstruktion beschreibt ein inverses Problem, das mehrere Vorwärtsrechnungen braucht, um das Schadensmodell an die Messdaten anzupassen. Durch die kleine Wellenlänge von Ultraschallwellen sind klassische Vorwärtsmethoden wie die Finte Elemente Methode rechenintensiv, weshalb die Autoren die semi-analytische Scaled Boundary Finite Element Method (SBFEM) benutzen, um den Rechenaufwand zu verringern. Im Beitrag wird ein inverses Verfahren basierend auf dem Automatischen Differenzieren in Kombination mit der SBFEM vorgestellt und an verschiedenen Schadenstypen in 2D-Querschnittmodellen von Wellenleitern getestet. In der präsentierten Vorstudie werden dafür „Messdaten“ aus unabhängigen Simulationen verwendet.
Recently, non-destructive testing in civil engineering (NDT-CE), in particular of concrete components, has successfully mastered the leap from research to practice. Several methods have been established for field inspections to determine the concrete cover of reinforcement or to estimate the compressive strength as well as other parameters related to the concrete material. In addition, the application of non-destructive testing is indispensable, if information about the inner structure - such as the location of rebars and tendon ducts or the damage-related condition assessment to detect grouting defects, honeycombs, delamination, or corrosion - is required. Besides the selection of a suitable NDT method and an appropriate inspection system, the reliability of the results depends largely on the person who applies the non-destructive inspection technique and evaluates the inspection results. To ensure a high quality of non-destructive concrete evaluation as well as to keep the uncertainty caused by the inspection personnel to a minimum, structured, consistent, and regulated theoretical as well as practical training of inspection personnel is essential. To close this gap, the subcommittee of education and training (UA-A) within the committee for NDT-CE of the German Society for Non-Destructive Testing (DGZfP) has been reactivated in 2018 to establish uniform training standards for non-destructive concrete inspections in the long term. The subcommittee consists of scientists, practitioners, authorities, and clients. So far, the national standard DIN 4871 “Non-destructive testing - Qualification of NDT personnel in Civil Engineering (NDT-CE)” was developed. This standard considers the civil-industry-specifics, for example, that standards for NDT of concrete, as well as related product standards with a few exceptions, still do not exist at the moment. Within this presentation, the concept, the connection to ISO 9712 and other standards as well as an overview of the recently developed German standard DIN 4871 will be presented.
Recently, non-destructive testing in civil engineering (NDT-CE), in particular of concrete components, has successfully mastered the leap from research to practice. Several methods have been established for field inspections to determine the concrete cover of reinforcement or to estimate the compressive strength as well as other parameters related to the concrete material. In addition, the application of nondestructive testing is indispensable, if information about the inner structure - such as the location of rebars and tendon ducts or the damage-related condition assessment to detect grouting defects, honeycombs, delamination, or corrosion - is required. Besides the selection of a suitable NDT method and an appropriate inspection system, the reliability of the results depends largely on the person who applies the non-destructive inspection technique and evaluates the inspection results. To ensure a high quality of non-destructive concrete evaluation as well as to keep the uncertainty caused by the inspection personnel to a minimum, structured, consistent and regulated theoretical as well as practical training of inspection personnel is essential. To close this gap, the subcommittee of education (UA-A) within the committee for NDT-CE of the German Society for Nondestructive Testing (DGZfP) has been reactivated in 2018 to establish uniform training standards for nondestructive concrete inspections in the long term. The subcommittee consists of scientists, practitioners, authorities, and clients. So far, the national standard DIN 4871 “Non-destructive testing - Qualification and Certification of NDT personnel in Civil Engineering (NDT-CE)” was developed and is currently under review. This standard considers the civil-industry-specifics, for example, that standards for NDT of concrete, as well as related product standards with a few exceptions, still do not exist at the moment. Within this presentation, the concept, the connection to ISO 9712 and other standards as well as an overview of the developed German standard DIN 4871 will be presented.
Impulse-thermography is an active method for quantitative investigations of the near surface region of various structures. It has recently been applied and optimised to applications in civil engineering. By using either an internal or external heat source, parts of the structure under investigation are heated up and the transient heat flux is observed by recording the temperature change at the surface as a function of time. This method is very well suited for the detection of voids and honeycombing in concrete, up to concrete covers of 10 cm as well as for the location of delaminations in multi-layered systems (e.g. plaster on concrete, CFRP-laminates on concrete, asphalt on concrete). Also safety relevant defects like voids in tendon ducts and cracks in concrete could be recognised.
Die Entwicklung zerstörungsfreier Prüfverfahren im Bauwesen (ZfPBau-Verfahren) hat in den letzten Jahren zu einer rasanten Leistungssteigerung geführt. Etliche Verfahren haben das Potenzial, in der Zukunft vom 'Stand der Wissenschaft' zum 'Stand der Technik' zu werden. Damit dies geschieht, muss möglichen Kunden vermittelt werden, welche Prüfaufgabe mit welchem Verfahren bearbeitet werden kann und wie zuverlässig die Ergebnisse sind. Um die Leistungsfähigkeit von ZfPBau-Verfahren nachzuweisen, ist eine genaue Kenntnis des wirklichen Bestands und der tatsächlichen Schäden erforderlich, um diese mit den Messergebnissen zu vergleichen und deren Güte zu bewerten. Mit dem Abriss der Spandauer- Damm-Brücke in Berlin ergab sich die Gelegenheit, zunächst eine großflächige Zustandsermittlung der Fahrbahnplatte bezüglich des Grads vorhandener Korrosionsschäden und des Verpresszustands von Spanngliedern vorzunehmen. Durch den vorgefundenen Zustand der Quervorspannung mit nachweislich vorhandenen Brüchen der Spanndrähte konnte an diesem Abrissbauwerk die Leistungsfähigkeit des Remanenzmagnetismusverfahrens zur Ortung von Spanndrahtbrüchen erstmals großflächig nachgewiesen werden, wobei auch der Vergleich der Untersuchungen mit und ohne Fahrbahnbelag durchgeführt wurde. Da der Anteil an vorhandenen Verpressfehlern nach großflächiger Auswertung sich als sehr gering herausstellte und an den ausgelösten Brückenteilen keine Verpressfehler vorhanden waren, wird in diesem Beitrag die Leistungsfähigkeit der Kombination von Radar und Ultraschall mit bildgebender Darstellung gezeigt. Damit wird es künftig möglich sein, Informationen zur Rekonstruktion nicht vorhandener Bestandspläne zu gewinnen.