Filtern
Erscheinungsjahr
Dokumenttyp
Sprache
- Englisch (18)
Schlagworte
- Friction (3)
- Hot steam (3)
- Wear (3)
- Temperature (2)
- Abrasion (1)
- Alumina (1)
- Aluminium oxide (1)
- Apha-alumina (1)
- Binder (1)
- Ceramic (1)
Organisationseinheit der BAM
The tribological behaviour under dry sliding conditions of Magneli phase Ti4O7 and e-phase Ti2Cr2O7 with α-alumina as a sliding partner has been characterised at room temperature by oscillating sliding. The mechanical properties as well as Vickers hardness measurements do not reveal big differences between the materials, and 4-point bending strengths are around 200 MPa for both materials. Although the friction coefficients are in the medium range of 0.6 and do not differ much between the materials, the wear behaviour is very different. At room temperature, the wear coefficient of Ti2O7 is strongly dependent on relative humidity, and wear is highest under dry conditions when relative humidity is low as it is typically found for many ceramic materials. Ti2Cr2O7 shows remarkably different wear behaviour with the lowest wear in dry conditions. The measured coefficients of wear at low relative humidity of 4% are more than 2 orders of magnitude lower than those for Ti2O7.
The historical development on the discoveries of lubrication regimes for lubricated sliding contacts has been reviewed from the very beginning. It was found that the functional relationship between the coefficient of friction and the product of sliding speed and viscosity divided by the normal load well known as the Stribeck curve has been experimentally explored much earlier by Adolf Martens in 1888 long before Richard Stribeck did his pioneering measurements in 1902. However, basic work in this field of experimental hydrodynamics was done and results were published even earlier than that back in 1854 by Gustave A. Hirn, in 1879 by Robert H. Thurston and in 1883 by Beauchamp Tower.
Zero wear (Null Verschleiß)
(2012)
Recent developments in contact mechanics and microfribology have shown that it is very important to study surface modification effects for quantification of „Zero wear“ (plastic deformation of upper parts of asperities) during sliding friction. The present work considers experimental and Simulation data on the Formation of elastic and plastic contact areas during sliding friction on rough surfaces. The Simulation of discrete contact was carried out using as a source the AFMimages of real surface topography at micro/nanoscale.
The approach for quantification of „zero wear“, proposed here, is not using common Statistical Parameters of roughness, but it considers contact areas on asperities.
In these areas some regions are undergoing plastic deformation which influences surface Transformation during sliding friction. Also, the workhardening effect was taken into account in the Simulation
of sliding friction. This enabled a rnore successful fit of experimental data. The results obtained of the Computer simulations will provide a way of studying friction force at the initial stage of the running-in process.
Zero wear (Null Verschleiß)
(2013)