Filtern
Dokumenttyp
- Vortrag (3)
Sprache
- Englisch (3) (entfernen)
Referierte Publikation
- nein (3)
Schlagworte
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (3) (entfernen)
In many industrial steel construction branches, like mobile cranes and the offshore sector, high-strength fine-grained structural steels with a yield strength of over 690 MPa have long been used. To guarantee the necessary load-bearing capacity, the welding processing of these steels requires reliable knowledge of the complex interaction between the welding process, its underlying heat input and corresponding cooling conditions, chemical composition of base and filler materials, and resulting metallurgical phenomena in the weld seam and HAZ. Microalloying elements such as Ti and Nb make an indispensable contribution to increasing the strength by precipitation hardening. Previous investigation has shown that significant influence of the microalloying elements on the phase transformation can be assumed regarding the hardening and/or softening of the heat-affected zone. The standard specs for the chemical composition according to DIN EN 10025-6 often just specify chemical limitations for the manufacturer to achieve the desired mechanical properties. The effect of the alloying elements and the corresponding precipitates (carbides and/or nitrides) is sometimes entirely contrary, especially in case of dissolution and re-precipitation in the heat-affected zone (HAZ) with identical filler metal. This makes an adequate prediction of the batch dependency with regard to weldability and the load-bearing capacity of the welded joint difficult. The joining of these steels is mainly carried out by gas metal arc welding (GMAW). Modern inverter welding sources and micro-electronics control technology enabled the use of controlled arc variants, such as the modified spray arc (Mod. SA). Several characteristics from this arc variant e.g. reduced weld seam opening angles and increased deposition rates. Whereby this high heat exposure can have a negative effect on the phase transformation in the HAZ. An undesirable property is the softening of the HAZ, as well as the opposite effect of hardening.
Der Einsatz von hochfesten niedriglegierten Stählen (HSLA) ist in vielen Industriesektoren, wie dem allgemeinen Bauwesen, Offshore Strukturen, Mobilkranbau usw. unumgänglich geworden. Die steigende Nachfrage an Stählen mit einer hohen Festigkeit und gleichzeitig hervorragenden Zähigkeit stellt ein ökonomisches und ökologisches Potential dieser Stähle in Vordergrund. Aktuell gültige Normvorgaben (EN ISO 10025-6) geben den Stahlherstellern Vorgaben bezüglich der chemischen Zusammensetzung, um die geforderten mechanischen Eigenschaften erreichen zu können. Die Legierungsrouten variieren jedoch von Hersteller zu Hersteller. In Betracht der Schweißeignung dieser Stähle zeigt sich das Problem, dass diese bereits bei geringen Nb- und Ti-Mikrolegierungsunterschieden im Grundwerkstoff ein divergentes metallurgisches Verhalten in der Wärmeeinflusszone (WEZ) aufweisen.
In diesem Vortrag werden die schweiß-metallurgischen Unterschiede zwischen verschieden mikrolegiertem hochfestem Feinkornbaustahl S690QL thematisiert. Zur Prüfung der Schweißnahtfestigkeit wurden mittels eines instrumentierten DIC (ARAMIS) Systems Querzugversuche an Schweiß-Querflachzugproben durchgeführt.
Microalloying elements, such as Nb and Ti, are essential for significantly increasing the strength of quenched and tempered, high-strength structural steels with a nominal yield strength ≥ 690 MPa and their welded joints. The standard specifications (e.g., EN 10025-6) for the chemical composition are only tolerated limit contents within which the steel manufacturers operate. The standard composition, however, says nothing per se about the properties of the material. Even small deviations in the alloy route can have a drastic effect on the mechanical properties. This makes it difficult or even impossible to adequately predict the weldability and integrity of the welded joint. An undesirable side effect is the possible softening of the heat-affected zone (HAZ), as well as the opposite hardening.Mechanical-technological investigations of the notched impact strength confirm the results of the simulation regarding the development of different microalloy routes in the welded state. From this, the influence of the heat effect of welding on the microstructure formation in the HAZ and the corresponding mechanical properties can be described qualitatively.