Filtern
Erscheinungsjahr
Dokumenttyp
- Zeitschriftenartikel (301) (entfernen)
Sprache
- Englisch (249)
- Deutsch (38)
- Russisch (9)
- Mehrsprachig (2)
- Italienisch (1)
- Serbisch (1)
- Chinesisch (1)
Schlagworte
- Laser beam welding (60)
- Laser welding (18)
- Laser metal deposition (15)
- Resistance spot welding (15)
- Welding simulation (15)
- Additive manufacturing (14)
- Microstructure (14)
- Mechanical properties (11)
- Solidification cracking (11)
- Aluminium (9)
- Laserstrahlschweißen (9)
- Gas metal arc welding (8)
- Hybrid laser-arc welding (8)
- Numerical simulation (8)
- Welding (8)
- Electromagnetic weld pool support (7)
- Widerstandspunktschweißen (7)
- Design of experiments (6)
- Distortion (6)
- Electromagnetic weld pool control (6)
- Festigkeit (6)
- Hartmann effect (6)
- Hochfester Stahl (6)
- Hybrid laser arc welding (6)
- Lorentz force (6)
- Natural convection (6)
- Residual stress (6)
- Rissbildung (6)
- Thick-walled steel (6)
- Werkstofffragen (6)
- Artificial neural network (5)
- DED (5)
- Electron beam welding (5)
- Friction stir welding (5)
- Grain refinement (5)
- High power laser beam welding (5)
- Laser hybrid welding (5)
- Liquid metal embrittlement (5)
- Additive Fertigung (4)
- Advanced high strength steels (4)
- Austenitic stainless steels (4)
- Corrosion (4)
- Crack (4)
- Critical strain (4)
- Element transport (4)
- GTA welding (4)
- Hardness (4)
- Heat conduction (4)
- Heat treatment (4)
- Hot cracking (4)
- Magnetohydrodynamics (4)
- Marangoni flow (4)
- Neural networks (4)
- Numerical modeling (4)
- Numerical welding simulation (4)
- Porosity (4)
- Quality assurance (4)
- Residual stresses (4)
- Solidification (4)
- Weld defects (4)
- Weld pool shape (4)
- Weldability (4)
- 9%Ni steel (3)
- Adaptive control (3)
- Automotive application (3)
- Crack formation (3)
- Deep penetration (3)
- Directed energy deposition (3)
- FEA (3)
- Fatigue (3)
- Finite element analysis (3)
- Finite element simulation (3)
- Full penetration (3)
- Gap (3)
- Grain size (3)
- High strength steel (3)
- High strength steels (3)
- High-strength low-alloy steel (3)
- Inconel 718 (3)
- Liquid Metal Embrittlement (3)
- MAG welding (3)
- Magnetic field (3)
- Marangoni stresses (3)
- Mathematical modeling (3)
- Mathematical models (3)
- Mechanical mismatching (3)
- Multi-physical modelling (3)
- Partial penetration (3)
- Phase transformation (3)
- Pipeline (3)
- Post-weld heat treatment (3)
- Schweißsimulation (3)
- Sensitivity analysis (3)
- Simulating (3)
- Simulation (3)
- Stress reduction (3)
- TRIP steel (3)
- Temperature (3)
- Weld pool dynamics (3)
- Widerstandspressschweißen (3)
- AHSS (2)
- Advanced high strength steel (2)
- Aluminium alloys (2)
- Arc welding (2)
- Auftragschweißen (2)
- Austenite stability (2)
- Automated manufacturing (2)
- Automotive industry (2)
- Bulge effect (2)
- CCT sensitivity (2)
- CO2 lasers (2)
- Circumferential weld (2)
- Clad steels (2)
- Cladding parameter (2)
- Coarse-grained heat-affected zone (2)
- Columnar to equiaxed transition (CET) (2)
- Cracking (2)
- Cracks (2)
- Data preparation (2)
- Digital image correlation (2)
- Dimensional accuracy (2)
- Directed Energy Deposition (2)
- Directivity (2)
- Dissimilar metal weld overlays (2)
- Dual phase steel (2)
- Duplex (2)
- Duplex AISI 2205 (2)
- Duplex stainless steel (2)
- Duplex stainless steels (2)
- EBSD (2)
- EDXRD (2)
- Electromagnetically controlled laser beam welding (2)
- Elektronenstrahlschweißen (2)
- End crater (2)
- Energy input (2)
- Equivalent heat source (2)
- Fahrzeugbau (2)
- Fatigue life (2)
- Fatigue tests (2)
- Fiber laser (2)
- Fibre-optic lasers (2)
- Fusion zone size (2)
- GMA welding (2)
- Gap bridgeability (2)
- Gas shielded arc welding (2)
- Gas tungsten arc welding (GTAW) (2)
- Heat flow (2)
- High energy beam welding (2)
- High power (2)
- High-power laser beam welding (2)
- High-pressure pipelines (2)
- High-strength steel (2)
- Hot crack (2)
- Hot cracking test (2)
- Hybrid welding (2)
- Instrumentierte Eindringprüfung (2)
- Keyhole (2)
- Kornfeinung (2)
- Künstliche Intelligenz (2)
- L-PBF (2)
- Laser (2)
- Laser beam weliding (2)
- Laser beams (2)
- Laser cladding (2)
- Laser energy distribution (2)
- Laser keyhole welding (2)
- Laser scanner optics (2)
- Laser-Pulver-Auftragschweißen (2)
- Laser-hybrid welding (2)
- Laserhybridschweißen (2)
- Life Cycle Assessment (LCA) (2)
- Local critical strain (2)
- Longitudinal weld (2)
- Manganese (2)
- Marangoni effect (2)
- Matching ferritic welding electrode (2)
- Material flow (2)
- Material questions (2)
- Melt pool dynamics (2)
- Metal mixing (2)
- Modified spray arc (2)
- Molten pool (2)
- Nickel (2)
- Nickel alloys (2)
- Notch stress approach (2)
- Numerical modelling (2)
- Numerical process simulation (2)
- Optical flow (2)
- Optimisation (2)
- Orbital welding (2)
- Partial penetration welding (2)
- Pipe manufacturing (2)
- Porosity prevention (2)
- Preheating (2)
- Process monitoring (2)
- Process simulation (2)
- Punktschweißverbindung (2)
- Qualitätssicherung (2)
- Ray tracing (2)
- Refill friction stir spot welding (2)
- Repair welding (2)
- Schutzgasschweißen (2)
- Schweißeignung (2)
- Schweißnahtfehler (2)
- Seam geometry (2)
- Shielding gases (2)
- Simulation and calculation (2)
- Simulation und Berechnung (2)
- Single pass welding (2)
- Spannungen (2)
- Spot welding (2)
- Stainless steels (2)
- Strength (2)
- Stresses (2)
- Submerged arc welding (2)
- Superellipse (2)
- Synchrotron (2)
- Sysweld (2)
- Temperature field (2)
- Tensile tests (2)
- Thermal analysis (2)
- Thermal cycles (2)
- Thermo-fluid flow (2)
- Ti-6Al-4V (2)
- Titanium alloy (2)
- Transformable steels (2)
- Tubular X-joints (2)
- Vapor plume (2)
- Verzug (2)
- WIG-Schweißen (2)
- Welding-induced distortion (2)
- Welding-induced residual stress (2)
- Wire arc additive manufacturing (2)
- Wärmebehandlung (2)
- YAG lasers (2)
- laser welding (2)
- resistance spot welding (2)
- 2D ray tracing (1)
- 3D ray tracing (1)
- 9% Ni Steel (1)
- AC magnetic field (1)
- AGIL (1)
- AM (1)
- AM feature integration (1)
- AZ31 magnesium alloy (1)
- Adaptive welding beam oscillation (1)
- Additive Manufacturing (1)
- Advanced High-Strength Steel (AHSS) (1)
- Advanced high-strength steel (1)
- Advanced high-strength steels (1)
- Al Mg Si alloys (1)
- Al Ti5B1 (1)
- AlMg0.7SiTiB filler wire (1)
- Alloy 1050A (1)
- Alloy 5083 (1)
- Alloy 6082 (1)
- Aluminium alloy (1)
- Aluminium-Legierung 5083 (1)
- Aluminium/Aluminiumlegierungen (1)
- Aluminum alloy 2024-T3 (1)
- Aluminum alloys (1)
- Aluminum bronze (1)
- Analysis techniques (1)
- Analytical approach (1)
- Anisotropic austenitic steel (1)
- Anisotropic austenitic weld (1)
- Artificial Intelligence (1)
- Artificial intelligence (1)
- As-shielded arc welding (1)
- Austenitic (1)
- Austenitic welding electrode (1)
- Automation (1)
- Automatisierte Fertigung (1)
- Automobile engineering (1)
- Automobiles (1)
- Automobilindustrie (1)
- Automotive (1)
- Automotive assembly (1)
- Axial force (1)
- Bead-on-plate welds (1)
- Beam attenuation (1)
- Beam welding (1)
- Bending test (1)
- Boundary element method (1)
- Build-up strategy (1)
- Bulge formation (1)
- Bulging (1)
- Bulging effect (1)
- Bulging effects (1)
- C-Mn steels (1)
- CFD model (1)
- CO2 laser (1)
- CO2- and Nd:YAG laser (1)
- Calculation (1)
- Carbon dioxide footprint (1)
- Carbon steels (1)
- Charpy impact toughness (1)
- Cimensional Accuracy (1)
- Clustering (1)
- Coarse grained heat affected zone (1)
- Columnar crystal growth (1)
- Combined processes (1)
- Computer vision (1)
- Condensation (1)
- Condition monitoring (1)
- Continuous cooling transformation diagrams (1)
- Control magnetic field (1)
- Controlled tensile weldability test (1)
- Convolutional neural network (1)
- Corrosion resistance (1)
- Crack growth (1)
- Crash behaviour (1)
- Crater (1)
- Critical strain rate (1)
- Critical strains (1)
- Cryogenic steel (1)
- Crystal branch development (1)
- DED-EB (1)
- DED-LB (1)
- DIC (1)
- DIP transfer (1)
- Damage prediction (1)
- Deep learning (1)
- Deep penetration laser beam welding (1)
- Defects (1)
- Deformation (1)
- Deformation behaviour (1)
- Deformed geometry (1)
- Dendrite growth (1)
- Density measurement (1)
- Deposition rate (1)
- Deposition welding (1)
- Diagnostic of the torch (1)
- Die-cast aluminum (1)
- Die-casted aluminum (1)
- Digital Image Correlation (1)
- Digitalisierung (1)
- Digitalization (1)
- Digitization (1)
- Direct energy deposition (1)
- Directed Energy Depositio (1)
- Discontinuities (1)
- Dissimilar joints (1)
- Dissimilar welding (1)
- Drive pinion (1)
- Drop out of bead (1)
- Duplex nucleation theory (1)
- Duplex steels (1)
- Dynamic fracture tests (1)
- EBAM (1)
- Economic wide technology replacement (1)
- Edge quality (1)
- Eigenspannungen (1)
- Electro-thermomechnical model (1)
- Electrode geometry (1)
- Electromagnetic (1)
- Electromagnetic backing (1)
- Electromagnetic influence (1)
- Electromagnetic rectification (1)
- Electromagnetic stirring (1)
- Electromagnetic support (1)
- Electromagnetic supported degassing (1)
- Electromagnetic weld control (1)
- Electromagnetic weld pool support system (1)
- Elektromagnetische Badstütze (1)
- Elektromagnetische Schmelzbadunterstützung (1)
- Embedded electronics (1)
- Energy density distribution (1)
- Energy dispersive synchrotron X-ray diffraction (1)
- Energy efficiency (1)
- Energy parameters of the arc (1)
- Environment (1)
- Environmental impact categories (1)
- Epitaxial nucleation (1)
- Equivalent stress concentration factors (1)
- Experimental determination (1)
- Experimental validation (1)
- FEM (1)
- Fair salary (1)
- Fatigue loading (1)
- Ferromagnetic steel (1)
- Ferromagnetic steels (1)
- Ferrous metals and alloys (1)
- Fibre lasers (1)
- Filler wire (1)
- Filler wire mixing (1)
- Fillet welds (1)
- Fine-grained Steel (1)
- Finite Element Method (1)
- Finite element method (1)
- Finite element method (FEM) (1)
- Finite elements analysis (1)
- Flange width (1)
- Flow (1)
- Fluid flow (1)
- Flüssigmetallinduzierte Rissbildung (1)
- Fracture (1)
- Fracture behaviour (1)
- Frequency (1)
- Fresnel reflection (1)
- Friction welding (1)
- Full penetration laser welding (1)
- Full penetration welding (1)
- Functional-analytical solution (1)
- Fusion zone (1)
- Fusion zone profile (1)
- Fusion zone, nickel alloys (1)
- GMA surfacing (1)
- GMA-laser hybrid welding (1)
- GMAW (1)
- GTAW (1)
- Galvanized steel (1)
- Gap bridging (1)
- Gap compensation (1)
- Gaps (1)
- Gas-shielded arc welding (1)
- General analytical solutions (1)
- Gleeble experiments (1)
- Gleeble testing (1)
- Global optimisation (1)
- Grade S960QL steel (1)
- Grain structure (1)
- Greenhouse gas mitigation (1)
- Greens function method (1)
- HAZ crack (1)
- HSLA (1)
- Hardly separable problem (1)
- Heat Input (1)
- Heat Treatment (1)
- Heat generation (1)
- Heat input (1)
- Heat source calibration (1)
- Heat source configuration (1)
- Heat source models (1)
- Heat transfer (1)
- Heißrisse (1)
- High brightness (1)
- High power fibre laser (1)
- High power welding (1)
- High process speeds (1)
- High-Power Welding (1)
- High-power fibre laser (1)
- High-power laser beam (1)
- High-strength fine-grained steels (1)
- High-strength steel sheets (1)
- Higher manganese content (1)
- Highspeed-plasma-laser-cladding (1)
- Hochleistungsschweißen (1)
- Hohlprofilknoten (1)
- Hold time (1)
- Hot Cracks (1)
- Human health (1)
- Hybrid Laser Arc Welding (1)
- Hybrid Laser arc Welding (1)
- Hybrid Laser-Arc Welding (1)
- Hybridschweißen (1)
- Hydrostatic force compensation (1)
- Imaging (1)
- Impact Absorbed Energy (1)
- Impact absorbed energy (1)
- In situ strain (1)
- In-situ synchrotron diffraction (1)
- Inconel 625 (1)
- Inconel 939 (1)
- Industrial and Manufacturing Engineering (1)
- Industrial application (1)
- Industrial parts (1)
- Instumented indentation test (1)
- Integrated alignment features (1)
- Inverse heat conduction problem (1)
- Inverse modelling (1)
- Joint-site structure (1)
- Kaltzähe Stähle (1)
- Kerbspannungskonzept (1)
- Keyhole collapse (1)
- Keyhole mode welding (1)
- Keyhole stability (1)
- Kl (1)
- Körperschall (1)
- LMD (1)
- LME (1)
- Lamé curves (1)
- Lamé curves approximation (1)
- Laser Beam Welding (1)
- Laser Metal Deposition (1)
- Laser Metal Deposition (LMD) (1)
- Laser Powder Bed Fusion (1)
- Laser Welding (1)
- Laser arc-hybrid welding (1)
- Laser beam Welding (1)
- Laser cutting (1)
- Laser implantation (1)
- Laser melting (1)
- Laser metal fusion (1)
- Laser powder bed fusion (1)
- Laser powder cladding (1)
- Laser powder-based directed energy deposition (1)
- Laser surfacing (1)
- Laser-MSG-Hybridschweißen (1)
- Laser-Pulver-Auftragsschweißen (1)
- Laser-metal-deposition (1)
- Laserschweißen (1)
- Life cycle assessment (1)
- Life cycle assessment (LCA) (1)
- Life-cycle assessment (1)
- Lifetime (1)
- Lightweight design (1)
- Liquid Metal Embrittlement (LME) (1)
- Local fatigue spproaches (1)
- Local reduced pressure (1)
- Lokale Effekte (1)
- Lokale Festigkeit (1)
- Lokale Spannungs-Dehnungskurven (1)
- Low alloy steels (1)
- Low feed rates (1)
- Low heat input GMA welding (1)
- Low heat input Gma welding (1)
- Low transformation temperature (LTT) alloy (1)
- Low transformation temperature filler material (1)
- Lötrissigkeit (1)
- MHD (1)
- MIG welding (1)
- MRO (1)
- MSG-Schweißen (1)
- Magnesium Alloy (1)
- Magnesium alloy (1)
- Magnetfelder (1)
- Magnetic bath support (1)
- Maritime industry (1)
- Martensitbildung (1)
- Martensite kinetic (1)
- Martensite start temperature (1)
- Martensite transformation (1)
- Martensitic transformation (1)
- Matching ferritic filler metal (1)
- Material modeling (1)
- Measurement (1)
- Mechanical Properties (1)
- Mechanical properties of the joints (1)
- Mechanical property (1)
- Mechanical strength (1)
- Mechanical-technological properties (1)
- Mesh analysis (1)
- Metallic vapour plume (1)
- Metallurgische Fragen (1)
- Microcracking (1)
- Microstructure Tensile strength (1)
- Misalignment of edges (1)
- Mobile vacuum (1)
- Model calibration (1)
- Model order reduction (1)
- Model prediction (1)
- Modeling (1)
- Modeling of fluid flow (1)
- Modellierung (1)
- Modified varestraint transvarestraint (MVT) hot cracking test (1)
- Molten pool dynamics (1)
- Monitoring systems (1)
- Multi-materials joining (1)
- Multi-pass welding (1)
- Multi-physical modeling (1)
- Multi-regional inputeoutput data (1)
- Multiple reflections (1)
- Multirun welding (1)
- Narrow gap welding (1)
- Neuronales Netz (1)
- Ni-based austenitic filler metal (1)
- Ni-based austenitic welding electrode (1)
- Ni-based superalloy (1)
- NiCrBSi (1)
- Non-destructive testing (1)
- Normen (1)
- Novel metrology (1)
- Novel optical measurement (1)
- Numerical Simulation (1)
- Numerical analysis (1)
- Numerical approach (1)
- Numerical simulations (1)
- Numerical welding simulations (1)
- Numerische Simulation (1)
- Open science (1)
- Open source (1)
- Optical measurement (1)
- Optical measurment technique (1)
- Optimization (1)
- Ortsaufgelöst (1)
- Oscillating magnetic field (1)
- Oscillating vapor plume (1)
- PBF-LB/M (1)
- Particles (1)
- Path planning (1)
- Periodic solidification pattern (1)
- Phase field method (1)
- Pin profile (1)
- Pipe Welding (1)
- Pipe laying (1)
- Pipe weld preparation (1)
- Pipe welding (1)
- Pipeline steel of grade X120 (1)
- Plane crystalization (1)
- Plasma cutting (1)
- Plasma-cut samples (1)
- Plastic deformation (1)
- Plume (1)
- Plume heating (1)
- Poren (1)
- Pores (1)
- Porosity reduction (1)
- Position welding (1)
- Post-welding heat treatment (1)
- Precipitation hardening aluminum alloys (1)
- Prior austenite grain size (1)
- Process chain (1)
- Process combinations (1)
- Process innovations (1)
- Process monitoring and control (1)
- Process procedures (1)
- Process stability (1)
- Proper generalized decomposition (1)
- Prozesskombinationen (1)
- Prozessüberwachung (1)
- Pufferschichten (1)
- Pulsed laser beam welding (1)
- Punktschweißkleben (1)
- Quality monitoring (1)
- Qualität (1)
- RSW (1)
- Ray teacing (1)
- Ray-tracing methods (1)
- Reference lists (1)
- Research data management (1)
- Resistance Spot Welding (RSW) (1)
- Resistance pressure welding (1)
- Resource efficiency (1)
- Retained austenite (1)
- Rissanfälligkeit (1)
- Robots (1)
- SEM (1)
- SMAW (1)
- Schutzgas (1)
- Schweißnahtgeometrie (1)
- Schweißnahtimperfektionen (1)
- Schweißunregelmäßigkeiten (1)
- Secondary heat source (1)
- Selective Laser Melting (1)
- Selektive-laser-melting (1)
- Sensitivitätsanalyse (1)
- Sensor (1)
- Sensors (1)
- Shear strength (1)
- Sheet (1)
- Shielding atmosphere (1)
- Ship building (1)
- Shipbuilding steel (1)
- Shrinkage (1)
- Similar and dissimilar material spot weld (1)
- Simufact.welding (1)
- Single-pass welding (1)
- Social Life Cycle Assessment (SLCA) (1)
- Software (1)
- Spannungs-Dehnungskurve (1)
- Stainless Steel (1)
- Stainless austenitic and duplex steels (1)
- Stainless steel (1)
- Standards (1)
- Steady-state weld pool (1)
- Steel and Al (1)
- Steels (1)
- Stiffness (1)
- Stochastic search method (1)
- Strain field (1)
- Strain fields prediction (1)
- Strain measurement (1)
- Strain rate (1)
- Strain rates (1)
- Strain-rate (1)
- Stress-strain behavior (1)
- Structural stress approach (1)
- Super martensitic filler material (1)
- Superalloy (1)
- Surface cracks (1)
- Surface roughness (1)
- Surface structuring (1)
- Sustainability assessment (1)
- System technology (1)
- TIG welding (1)
- TRIP - transformation induced plasticity (1)
- Tack welding (1)
- Tandem gas metal arc welding (1)
- Tandem welding (1)
- Tear tests (1)
- Technical crack detection (1)
- Temperature distribution (1)
- Temperature field generation (1)
- Tensile Strength (1)
- Tensile properties (1)
- Tensile resistance spot welding experiment (1)
- Tensile strength (1)
- Tensileshear (1)
- Testing method (1)
- Texture (1)
- Thermal energy generation (1)
- Thermal softening (1)
- Thermo physical simulation (1)
- Thermo-fluid dynamics (1)
- Thermography (1)
- Thermomechanical material properties (1)
- Thermophysical material properties (1)
- Thick materials (1)
- Thick plate (1)
- Thick plate welding (1)
- Thick plates (1)
- Thick steel plates (1)
- Thick walled parts (1)
- Thick-Walled Steel (1)
- Thick-plate welding (1)
- Thick-walled Structures (1)
- Thin steel plates (1)
- Three-dimensional crystallization (1)
- Ti3Al2.5V (1)
- Tick plates (1)
- Time-to-solution (1)
- Tool torque (1)
- Torsion (1)
- Toughness (1)
- Transformation induced plasticity (1)
- Transformation induced plasticity (TRIP) (1)
- Transformation-induced plasticity (TRIP) (1)
- Transient heat transfer (1)
- Traverse force (1)
- Tube welding (1)
- Tubular joints (1)
- Tungsten carbide (1)
- Turbine blade (1)
- Turbine components (1)
- Two-dimensional solidification (1)
- Two-run welding technique (1)
- Ultrasonic C-scan image (1)
- Ultrasonic field (1)
- Ultrasonic non-destructive evaluation (1)
- Ultrasonic vibration (1)
- Umweltschutz (1)
- Unalloyed steels (1)
- Unterpulverschweißen (1)
- V groove (1)
- V-notch impact toughness (1)
- Vakuum (1)
- Vapor recondensation (1)
- Vaporization (1)
- Vehicle bodies (1)
- Vehicle construction (1)
- Viscoplasticity (1)
- Volume heat source (1)
- Volumetric heat source (1)
- Wear resistance (1)
- Weld end crater (1)
- Weld imperfections (1)
- Weld metal (1)
- Weld microstructure (1)
- Weld plan modification (1)
- Weld pool (1)
- Weld pool behavior (1)
- Weld pool modeling (1)
- Weld pool stabilization (1)
- Weld pool support (1)
- Weld root (1)
- Weld seam geometry (1)
- Weldbonded joints (1)
- Weldbonding (1)
- Welding Current (1)
- Welding Simulation (1)
- Welding parameter (1)
- Welding process simulation (1)
- Welding residual stress (1)
- Welding residual stresses (1)
- Welding thermal cycle (1)
- Weldx (1)
- Werkstoffranking (1)
- Windkraftanlagen (1)
- Wineglass shape (1)
- Wire electron beam additive manufacturing (1)
- Wire feed laser beam welding (1)
- Wire-based additive manufacturing (1)
- Work-flow (1)
- Wärmequellenkonfiguration (1)
- X-ray computer tomography (1)
- Zinc (1)
- Zinc coated steel (1)
- Zink (1)
- Zinkbeschichtung (1)
- cryogenic steel (1)
- digital image correlation (1)
- dual phase steel (1)
- hardness (1)
- hochfeste Stähle (1)
- local effects (1)
- microstructure (1)
- quality assurance (1)
- sensitivity analysis (1)
- strength (1)
- tensile strength (1)
- vacuum (1)
- welding residual stresses (1)
- Äquivalente Spannungskonzentrationsfaktoren (1)
- Ökobilanz (1)
- Ökonomische und ökologische Vorteile (1)
- ГИДРОДИНАМИКА (1)
- КОНВЕКЦИЯ (1)
- ЛАЗЕРНАЯ СВАРКА (1)
- МЕТОД КОНЕЧНЫХ ЭЛЕМЕНТОВ (1)
- СВАРОЧНАЯ ВАННА (1)
- ТЕМПЕРАТУРНОЕ ПОЛЕ (1)
- ТЕПЛОПРОВОДНОСТЬ (1)
- ЧИСЛЕННОЕ МОДЕЛИРОВАНИЕ (1)
Organisationseinheit der BAM
- 9 Komponentensicherheit (143)
- 9.3 Schweißtechnische Fertigungsverfahren (140)
- 5 Werkstofftechnik (2)
- 5.2 Metallische Hochtemperaturwerkstoffe (2)
- 9.0 Abteilungsleitung und andere (2)
- 5.5 Materialmodellierung (1)
- 7 Bauwerkssicherheit (1)
- 7.7 Modellierung und Simulation (1)
- 9.6 Additive Fertigung metallischer Komponenten (1)
Beim Unterpulverschweißen sind die Prozessgeräusche ein Indikator für eine gute Fügequalität. Diese Beurteilung kann i.d.R. nur von einer erfahrenen Fachkraft durchgeführt werden. Eine kürzlich entwickelte künstliche Intelligenz kann automatisch das akustische Prozesssignal anhand vortrainierter Merkmale klassifizieren und die Fügequalität anhand des Geräuschs beurteilen. Der Algorithmus, einmal richtig trainiert, kann den Prüfaufwand beim Unterpulverschweißen deutlich reduzieren.
In recent years, in addition to the commonly known wire-based processes of Directed Energy Deposition using lasers, a process variant using the electron beam has also developed to industrial market maturity. The process variant offers particular potential for processing highly conductive, reflective or oxidation-prone materials. However, for industrial usage, there is a lack of comprehensive data on performance, limitations and possible applications. The present study bridges the gap using the example of the high-strength aluminum bronze CuAl8Ni6. Multi-stage test welds are used to determine the limitations of the process and to draw conclusions about the suitability of the parameters for additive manufacturing. For this purpose, optimal ranges for energy input, possible welding speeds and the scalability of the process were investigated. Finally, additive test specimens in the form of cylinders and walls are produced, and the hardness profile, microstructure and mechanical properties are investigated. It is found that the material CuAl8Ni6 can be well processed using wire electron beam additive manufacturing. The microstructure is similar to a cast structure, the hardness profile over the height of the specimens is constant, and the tensile strength
and elongation at fracture values achieved the specification of the raw material.
The paper describes an experimental investigation of the electromagnetic porosity reduction in partial penetration laser beam welding of 6 mm thick aluminum die casting AlSi9MnMg. The Investigation reveals that the usage of an electromagnetic field leads to a significant reduction of the porosity as well as to a surface smoothing of aluminum die casting. Based on the reference case without an electromagnetic influence, the porosity area was reduced gradually up to 76%.
Metallurgical pores as well as process pores were removed from the weld pool. Also the weld reinforcement was improved up to 78%. Best results were reached with a frequency of 4325 Hz and a magnetic flux density of 348 mT. Although a complete prevention of porosity was not achieved, the best weld seam reached a high quality and can be ranked in valuation group B of DIN EN ISO 13919-2:2001–12.
Micrometric surface topologies are required for a wide range of technical applications. While lowered surface features have been used for many years to improve the tribological behavior of contacting surfaces, there are also other fields of application, where the potential of elevated surface features is known, e. g. for metal forming tools. However, the demand for a high wear resistance of these structures often inhibits an industrial application. A solution is offered by structuring techniques that use additional material. A promising approach is the localized dispersing of hard ceramic particles by pulsed laser radiation, the so-called laser implantation. This paper describes the potential to adjust the geometry as well as the mechanical properties of laser implanted surfaces by means of microstructural and topological investigations. Afterwards, results of a wear test are given and different applications for this structuring technique are discussed. It can be shown that dome-shaped or ring-shaped structures on a micrometric scale can be produced with high hardness and wear resistance.
The increasing adoption of Open Science principles has been a prevalent topic in the welding science community over the last years. Providing access to welding knowledge in the form of complex and complete datasets in addition to peer-reviewed publications can be identified as an important step to promote knowledge exchange and cooperation. There exist previous efforts on building data models specifically for fusion welding applications; however, a common agreed upon implementation that is used by the community is still lacking. One proven approach in other domains has been the use of an openly accessible and agreed upon file and data format used for archiving and sharing domain knowledge in the form of experimental data. Going into a similar direction, the welding community faces particular practical, technical, and also ideological challenges that are discussed in this paper. Collaboratively building upon previous work with modern tools and platforms, the authors motivate, propose, and outline the use of a common file format specifically tailored to the needs of the welding research community as a complement to other already established Open Science practices. Successfully establishing a culture of openly accessible research data has the potential to significantly stimulate progress in welding research.
An approach to develop an arc sensor for gap width estimation during automated NG-GMAW with a weaving electrode motion is introduced by combining arc sensor readings with optical measurements of the groove shape to allow precise analyses of the process. The two test specimen welded for this study were designed to feature a variable groove geometry in order to maximize efficiency of the conducted experimental efforts, resulting in 1696 individual weaving cycle records with associated arc sensor measurements, process parameters and groove shape information. Gap width was varied from 18 mm to 25 mm and wire feed rates in the range of 9 m/min to 13 m/min were used in the course of this study. Artificial neural networks were applied as a modelling tool to derive an arc sensor for estimation of gap width suitable for online process control that can adapt to changes in process parameters as well as changes in the weaving motion of the electrode. Wire feed rate, weaving current, sidewall dwell currents and angles were defined as inputs to calculate the gap width. The evaluation of the proposed arc sensor model shows very good estimation capabilities for parameters sufficiently covered during the experiments.
With regard to efficient production, it is desirable to combine the respective advantages of additively and conventionally manufactured components. Particularly in the case of large-volume components that also include filigree or complex structures, it makes sense to divide the overall part into individual elements, which afterwards have to be joined by welding.
The following research represents a first step in fundamentally investigating and characterizing the joint welding of Laser Powder Bed Fusion (L-PBF) components made of Inconel 718. For this purpose, bead-on-plate welds were performed on plates manufactured using the L-PBF process and compared with the conventionally manufactured material. Conventional laser beam welding was used as welding process. The weld geometry was investigated as a function of the L-PBF build-up orientation. It was found that the welding depth and weld geometry differ depending on this orientation and in comparison to the conventional material.
A transient simulation including the impact of the laser energy, the melting of the metal and the development of the weld pool was conducted to observe the evolution of the vapor capillary and the solidification of the melt in pulsed laser beam welding of AISI 304 steel. The phase field method was implemented to investigate the evolution and behavior of the liquid-gas interface during welding and to describe the condensed and vapor phases. The effects of phase transition, recoil pressure, thermo-capillary and natural convection, vaporization and temperature dependent material properties were taken into account. A Gaussian-like heat source under consideration of the Fresnel absorption model was used to model the energy input of the laser beam. The heat source model was extended by a newly developed empirical approach of describing multiple beam reflections in the keyhole. To validate this new model, the numerical results were compared to experimental data and good agreement regarding the size and shape of the weld pool was observed.
The paper describes an experimental investigation of high power laser beam welding with an electromagnetic weld pool support for up to 20 mm thick plates made of duplex steel (AISI 2205) and mild steel (S235JR). The results of the welding tests show a successful application of this technology at ferromagnetic metals. Irregular sagging was suppressed successfully. An ac-power of less than 2 kW at oscillation frequencies between 800 Hz and 1.7 kHz is necessary for a full compasation of the hydrostatic pressure. Thus, it was demonstrated that the electromagnetic weld pool support is not only limited to non-ferromagnetic metals like austenitic steels. For future studies with duplex steel, the use of filler material has to take into account with regard to the balance of the mixed austenitic and ferritic phases.
Laser beam welding of aluminum die casting is challenging. A large quantity of gases (in particular, hydrogen) is absorbed by aluminum during the die-cast manufacturing process and is contained in the base material in solved or bound form. After remelting by the laser, the gases are released and are present in the melt as pores. Many of these metallurgic pores remain in the weld seam as a result of the high solidification velocities. The natural (Archimedean) buoyancy is not sufficient to remove the pores from the weld pool, leading to process instabilities
and poor mechanical properties of the weld. Therefore, an electromagnetic (EM) system is used to apply an additional buoyancy
component to the pores. The physical mechanism is based on the generation of Lorentz forces, whereby an electromagnetic pressure is introduced into the weld pool. The EM system exploits the difference in electrical conductivity between poorly conducting pores (inclusions) and the comparatively better conducting aluminum melt to increase the resulting buoyancy velocity of the pores. Within the present study, the electromagnetic supported degassing is investigated in dependence on the laser beam power, welding velocity, and electromagnetic flux density. By means of a design of experiments, a systematic variation of these parameters is carried out for partial penetration laser beam welding of 6mm thick sheets of wrought aluminum alloy AlMg3 and die-cast aluminum alloy AlSi12(Fe), where the wrought alloy serves as a reference. The proportion of pores in the weld seams is determined using x-ray images, computed tomography images, and cross-sectional images. The results prove a significant reduction of the porosity up to 70% for both materials as a function of the magnetic flux density.