Filtern
Dokumenttyp
- Sonstiges (8)
- Zeitschriftenartikel (6)
- Beitrag zu einem Tagungsband (3)
- Vortrag (3)
- Forschungsbericht (2)
- Beitrag zu einem Sammelband (1)
- Handbuch (1)
- Posterpräsentation (1)
Schlagworte
- Brückenbeläge (8)
- Asphaltbauweise (4)
- Fahrbahnübergänge (4)
- Asphaltbauweisen (3)
- Concrete pavements (3)
- PmB Schweißbahn (3)
- Structural sealant glazing (3)
- Technische Anforderungen (3)
- Betonfahrbahndecke (2)
- Betonfahrbahndecken (2)
Organisationseinheit der BAM
- 7 Bauwerkssicherheit (25) (entfernen)
Eingeladener Vortrag
- nein (3)
While there is a permanent improvement of concrete pavement mixtures and pavement construction types over the last decades, the state-of-the-art joint sealing materials and joint constructions seem to stagnate on an antiquated empirical level. This status has been reaffirmed in the latest European standard. The consequences in the motorway network due to unsatisfying capability and durabilty of joint sealing systems are unacceptable. In addition, inadequate traffic performance (noise emissions, roll-over comfort) and traffic safety losses in the joint area of concrete pavements are existing challenges. These deficits and weaknesses reflect a demand for joint sealing materials and constructions whose approval requirements take functional aspects into account. Furthermore a sufficient analysis of decisive loads and a practice-oriented method to evaluate the requirements towards performance and durability is still missed. In this contribution decisive loads to German highways are analyzed. The design of test specimen for representative functional testing of joint sealing systems is discussed. The focus is on the geometry of the test specimens and the used concrete mixture. Finally, a new approach for a function-orientated test concept that considers representative load functions is presented. The potential of this approach to validate the durability and capability of various joint sealing systems is also presented using an example.
Durability Assessment of Structural Sealant Glazing Systems applying a Performance Test Method
(2020)
During the service life of a Structural Sealant Glazing (SSG) facade, its silicone bond is exposed to climatic, chemical, and mechanical loads. While current durability assessment methods schedule separate test programmes for accelerated weathering and fatigue, the presented test applies mechanical loading and weather cycling simultaneously to simulate 50 years of use. Specifically designed medium-scale system specimens resemble a common SSG-bond. Displacement-controlled sinusoidal load cycles in two load directions subject these specimens to tensile, compression and shear loads. Weathering comprises temperature and humidity cycles, UV-radiation, and application of water and detergent. During testing, the forces transmitted by the system specimens are continuously measured for performance assessment. The resulting system response reveals mechanical performance characteristics like elastic moduli and dissipated energies which decrease during exposure, indicating stress relaxation and degradation. Two common structural sealants were tested. After testing, sections of the system specimens were subjected to tensile and shear tests for mechanical characterisation. Strengths and moduli are notably reduced by combined loading compared to those of reference and weathered specimens. Hardness and visual inspections of the bond correlate with the performance and bond characteristics. The approach introduced in this article provides a basis for life cycle assessment of SSG-systems.
Gradual or sudden changes in the state of structural systems caused, for example, by deterioration or accidental load events can influence their load-bearing capacity. Structural changes can be inferred from static and/or dynamic response data measured by structural health monitoring systems. However, they may be masked by variations in the structural response due to varying environmental conditions. Particularly, the interaction of nominally load-bearing components with nominally non-load bearing components exhibiting characteristics that vary as a function of the environmental conditions can significantly affect the monitored structural response. Ignoring these effects may hamper an inference of structural changes from the monitoring data. To address this issue, we adopt a probabilistic model-based framework as a basis for developing digital twins of structural systems that enable a prediction of the structural behavior under varying ambient condition. Within this framework, different types of data obtained from real the structural system can be applied to update the digital twin of the structural system using Bayesian methods and thus enhance predictions of the structural behavior. In this contribution, we implement the framework to develop a digital twin of a simply supported steel beam with an asphalt layer. It is formulated such that it can predict the static response of the beam in function of its temperature. In a climate chamber, the beam was subject to varying temperatures and its static response wass monitored. In addition, tests are performed to determine the temperature-dependent properties of the asphalt material. Bayesian system identification is applied to enhance the predictive capabilities of the digital twin based on the observed data.
Das erdölstammige Bindemittel Bitumen weist eine so komplexe Struktur auf, dass diese mit den derzeit eingesetzten Verfahren nur eingeschränkt erfasst werden kann. Eine innovative und vielversprechende Möglichkeit bietet in diesem Zusammenhang die FTIR-Spektroskopie in Kombination mit einer chemometrischen Auswertung, mit der schnell und einfach Aussagen über die Zusammensetzung sowie verschiedenste physikalische und chemische Eigenschaften von bitumenhaltigen Materialien möglich werden.
Fugenfüllungen im kommunalen Stadtstrassenbau unterliegen besonderen mechanischen Beanspruchungen. Hier kommt es bereits bei der Planung darauf an, Fugenausführungen und insbesondere Fugenfüllstoffe bewusst nach ingenieurtechnischen Gesichtspunkten auszuwählen. Dazu ist das ingenieurtechnische Verständnis der relevanten Fugenfüllstoffe - Funktionsweise, Leistungskriterien, Prüfungen, Dauerhaftigkeit - von entscheidender Bedeutung. Der Vortrag erläutert nicht nur die maßgebenden Fugenfüllstoffe unter den vorgenannten Schwerpunkten, sondern stellt auch das Verständnis zu den Rahmenbedingungen, Grundlagen und Wirkmechanismen des entsprechenden technischen Regelwerkes her. Neueste Entwicklungen werden den Praxisvertretern näher gebracht und erläutert. Die Zusammenhänge und Strategien zur Weiterentwicklung der „Betonstrasse der Zukunft“ werden diskutiert und dargestellt.
Flexible joint transition systems in the form of bituminous joint transitions, type 4.1a according to RTD1007-1, have been used in the Netherlands with varying success. The lifespan in practice was found to vary greatly: between 1 and 5 years. This is too short a lifespan in relation to the lifespan of the layers of asphalt pavement. Ideally, the replacement of these bituminous joint transitions should take place simultaneously as the maintenance of the asphalt layers.
In the meantime, research has been carried out nationally and internationally into improving the life span of bituminous joint transitions. In Germany and Switzerland, the regulations have been shown to lead to a life span of more than 10 years. On this basis, ETAG032-3 was established in the context of EOTA in 2013.
In a competition "Silent sustainable joint transitions" held by the Dutch Directorate-General for Public Works and Water Management in the period 2007-2012, three flexible bituminous joint transitions have already been tested, two of which were ultimately found to be suitable. These have been included in the multi-choice matrix (RTD 1007-1) as concept 4.1b (anchored bituminous joint transition) and 4.1c (unanchored bituminous joint transition with stretch-spreading inlay and poured asphalt edge beams). Monitoring these joint transitions in practice over the past 8 years has shown that the desired life span is achievable with these improved joint transitions.
It is expected that the improvement in life span achieved abroad can also be realised in the Netherlands if several aspects specific to the Netherlands are taken into account:
For large parts of the Dutch main road network, the traffic intensity of 500,000 heavy vehicles per year assumed in the ETAG032-3 is insufficient. This is a factor 4 to 5 higher on the busiest main roads in the Netherlands.
On 90% of the Dutch main road network, in contrast to countries such as Germany and Switzerland, an open layer (ZOAB (zeer open asfaltbeton [very open asphalt concrete])) is used.
In the Netherlands, in contrast to countries such as Germany and Switzerland, bridges and viaducts are made on a large scale of prefabricated beams and 'floating' support systems that consist entirely of rubber supports that can be deformed all-round. Such constructions have a less favourable, high-frequency deformation behaviour under traffic load.
In Germany and Switzerland, a minimum joint mass temperature of -20 °C is assumed to test bituminous joint transitions. For the Netherlands, -15 °C is assumed, which has a favourable effect.
The present second version of RTD 1007-4 is a guideline for the development and realisation of a new generation of more durable flexible joint transitions with a minimum design life of 10-15 years and is a guideline for contractors to demonstrate that a flexible joint transition system meets the requirements as set out in the Directorate-General for Public Works and Water Management guideline RTD 1007-2.
Die Ausführung von Abdichtungssystemen insbesondere an Ingenieurbauwerken der Verkehrsinfrastruktur greift in die unmittelbare Verfügbarkeit/Nutzbarkeit des Bauwerks ein und erfolgt deshalb i.a.R. unter höchstem Zeitdruck. Neuere materialtechnische Entwicklungen im Bereich der Flüssigkunststoff-Systeme erlauben kürzere Ausführungszeiten in einem erweiterten Einsatzspektrum. Zur Sicherstellung anforderungsgerechter Gebrauchseigenschaften des gesamten Brückenabdichtungssystems gibt die vorliegende Veröffentlichung Hinweise für die einzuhaltenden Baugrundsätze, bautechnologische Besonderheiten und Erfordernisse im Umgang mit Polymethylmethacrylat (PMMA) sowie qualitätssichernde Maßnahmen.
Diese Hinweisbroschüre erläutert allgemeine Planungsvoraussetzungen und Dimensionierungsregelungen, Baugrundsätze und Zulassungsbedingungen zur Anwendung innovativer Belagsdehnfugensysteme (Fahrbahnübergangskonstruktionen) in hochbeanspruchten Verkehrsflächen des Bundesfernstraßenbereiches. Alle planungsrelevanten, baustoffrelevanten, versuchstechnische, qualitätssichernden und baupraktischen Aspekte werden zur Unterstützung der Straßenbauverwaltungen, der Lieferfirmen und Ausführungsbetriebe erläutert. Die Veröffentlichung stellt eine technische Analyse aus Erfahrungssammlungen und Auswertung praktischer Erkenntnisse dar.
Dieses Wissensdokument führt zu den Vertragstexten der früheren ZTV BEL-FÜ (ZTV-ING 8-2) und heutigen ZTV-ING Teil 6 Abschnitt 7 aus und erläutert die „Zusätzlichen Technischen Vertragsbedingungen und Richtlinien für Ingenieurbauten, Teil 6: Bauwerksausstattung, Abschnitt 7: Fahrbahnübergänge aus Asphalt“. Dabei geht es insbesondere um Fugen von Ingenieurbauwerken des Verkehrswegebaus, die quer oder in einem bestimmten Winkel zur Fahrbahn verlaufen und befahren werden. Diese Fugen müssen deshalb einerseits in fahrtechnischem Sinne verschlossen werden, damit die Fahrzeuge den Spalt störungsfrei und verkehrssicher überqueren können. Andererseits ist ein Fugenverschluss zum Schutz des Tragwerks vor Feuchte- oder Schadstoffbeanspruchung (Korrosionsgefahr) erforderlich. Je nach Größe des Fugenspaltes und der auftretenden Bewegungen müssen die Fugenfüllungen unterschiedlich ausgebildet werden, um die überquerenden Lasten sicher in das Tragwerk abzuleiten. Bauteile oder Konstruktionen, die diese verkehrstechnische Aufgabe übernehmen, werden allgemein als Fahrbahnübergänge bezeichnet.
Die H ZTV-ING 6-7 ersetzen die „Hinweise und Erläuterungen zu den Zusätzlichen Technischen Vertragsbedingungen und Richtlinien für die Herstellung von Fahrbahnübergängen aus Asphalt in Belägen auf Brücken und anderen Ingenieurbauwerken aus Beton“, Ausgabe 2001.
Die Überarbeitung der „Hinweise und Erläuterungen“ wurde aufgrund der Überarbeitung der ZTV-ING 6-7 erforderlich. Außerdem wurden in den Hinweisen neue Entwicklungen in den Bereichen der Fahrbahnübergänge aus Asphalt mit größeren Einbaubreiten und dehnungsverteilenden Einbauten, der Belagsdehnfugen sowie des Oberflächenabschlusses mit GFK-Platten berücksichtigt.