Filtern
Erscheinungsjahr
Dokumenttyp
- Beitrag zu einem Sammelband (10)
- Zeitschriftenartikel (8)
- Beitrag zu einem Tagungsband (6)
- Vortrag (4)
- Handbuch (1)
Sprache
- Englisch (29) (entfernen)
Schlagworte
- Superimposed loading (5)
- Durability evaluation (4)
- System evaluation (4)
- Capability evaluation (3)
- Concrete pavements (3)
- Durability (3)
- Mechanical characteristics (3)
- Performance testing (3)
- Sealants (3)
- Structural glazing (3)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (4)
Quality Improvement of Expansion Joint Systems by Performance Related Tests of System Behaviour
(2002)
The operational principle for today's bridge deck surfacings is a strong and durable bond between all layers of the pavement and the concrete structure under all loads. A strong bond helps to ensure the desired safety level against water penetration. But in use there is a strong loading of the bond by crack development in the structure or pavement and its dynamical movement. To ensure the sealing function of the bridge deck surfacing over the time its waterproofing has to show a durable crack bridging ability. With it the useful life of the bridge deck surfacing is essentially determined. To characterise the influences on a durable bond strength and crack bridging ability of waterproofings special research and tests were realised in the BAM. From the test results it is possible to detect suitable waterproofing layers and differences in durability. Tensile fatigue strength and other mechanical features seems to be special suited material characteristics to describe the crack bridging behaviour of waterproofing layers.
Joint sealants influence decisively the performance and service life of pavements although they account for only a small fraction of the total investment. Motivated by the damages observed and the resulting, increasing maintenance efforts, the Federal German Government recognizes the need for performance-evaluated joint sealing systems with improved capability (fitness-for-purpose) and durability. A literature study showed that an identification of the actual mechanical system behavior under realistic loads as well as a prediction regarding the durability (fatigue, climatic effects) of joint sealing systems are either completely lacking in most of the relevant evaluation methods or have only been incompletely addressed previously. Furthermore an imbalance between commonly used test methodologies and the actual development status of modern modified sealing materials exists, i.e., the current test methods are not effective in evaluating the performance of tailor-made products. In this paper, the authors suggest a methodology to overcome the present situation. In contrast to the existing, predominantly empirical evaluation and selection of joint sealing materials and systems for pavements, the new approach is defined by verified performance under relevant and superimposed loads. This new approach is expected to allow a more engineered joint design. In addition to the adaptation of performance-oriented material identification tests, a special focus was placed on the development and installation of a complex test facility for the investigation of the service capability and durability of joint sealing systems in building constructions in general. This paper presents an attempt at the realization of this approach for pavement joints with the help of our new joint sealant test equipment utilizing a specific, adapted load function, which comprises cyclic movements (slow and fast acting), as well as crucial climatic exposures. The test data and its interpretation are discussed. For example, the actual mechanical behavior of the various joint sealing systems as well as the relevant maximum loading of cohesive and adhesive bonds can be deduced and used to differentiate between systems. Furthermore, information gained allows discrimination of products within the various joint sealing systems. The test results will also enable numerical simulations, e.g., of different joint designs or materials by finite element analysis. The fatigue behavior is detected by analysis of cycle-dependent changes of the mechanical system characteristics. The evaluation methodology further allows investigation of the degradation mechanisms of specific system failures and, thus, enables service life prediction by reproducing the performance of the complete system under realistic conditions. Constructional defects and material flaws can be activated and detected by the performance-related test methodology, thus identifying possible corrections to material selection and application procedures. The potential of the proposed evaluation methodology is discussed for several thermoplastic and reactive joint sealing systems.
Joint sealants influence decisively the performance and service life of pavements although they account for only a small fraction of the total investment. Motivated by the damages observed and the resulting, increasing maintenance efforts, the Federal German Government recognizes the need for performance-evaluated joint sealing systems with improved capability (fitness-for-purpose) and durability. A literature study showed that an identification of the actual mechanical system behavior under realistic loads as well as a prediction regarding the durability (fatigue, climatic effects) of joint sealing systems are either completely lacking in most of the relevant evaluation methods or have only been incompletely addressed previously. Furthermore an imbalance between commonly used test methodologies and the actual development status of modern modified sealing materials exists, i.e., the current test methods are not effective in evaluating the performance of tailor-made products. In this paper, the authors suggest a methodology to overcome the present situation. In contrast to the existing, predominantly empirical evaluation and selection of joint sealing materials and systems for pavements, the new approach is defined by verified performance under relevant and superimposed loads. This new approach is expected to allow a more engineered joint design. In addition to the adaptation of performance-oriented material identification tests, a special focus was placed on the development and installation of a complex test facility for the investigation of the service capability and durability of joint sealing systems in building constructions in general. This paper presents an attempt at the realization of this approach for pavement joints with the help of our new joint sealant test equipment utilizing a specific, adapted load function, which comprises cyclic movements (slow and fast acting), as well as crucial climatic exposures. The test data and its interpretation are discussed. For example, the actual mechanical behavior of the various joint sealing systems as well as the relevant maximum loading of cohesive and adhesive bonds can be deduced and used to differentiate between systems. Furthermore, information gained allows discrimination of products within the various joint sealing systems. The test results will also enable numerical simulations, e.g., of different joint designs or materials by finite element analysis. The fatigue behavior is detected by analysis of cycle-dependent changes of the mechanical system characteristics. The evaluation methodology further allows investigation of the degradation mechanisms of specific system failures and, thus, enables service life prediction by reproducing the performance of the complete system under realistic conditions. Constructional defects and material flaws can be activated and detected by the performance-related test methodology, thus identifying possible corrections to material selection and application procedures. The potential of the proposed evaluation methodology is discussed for several thermoplastic and reactive joint sealing systems.
Eyewitnesses describe burning pavement surfaces in extreme fire scenarios. However, it was believed that the pavement plays a negligible role in comparison to other items feeding such an extreme fire at the same time. The asphalt mixtures used differ widely, thus raising the question as to whether this conclusion holds for all kinds of such materials. Three different kinds of asphalt mixtures were investigated with the aim of benchmarking the fire risks. Cone calorimeter tests are performed at an irradiance of 70kWm-2. All three investigated asphalts burn in extreme fire scenarios. The fire response (fire load, time to ignition, maximum heat release rate and smoke production) is quite different and varies by factors of up to 10 when compared to each other. The fire load per mass is always very low due to the high content of inert minerals, whereas the effective heat of combustion of the volatiles is quite typical of non-flame retarded organics. The heat release rate and fire growth indices are strongly dependent on the fire residue and thus the kind of mineral filler used. Comparing with polymeric materials, the investigated Mastic Asphalt and Stone Mastic Asphalt may be called intrinsically flame resistant, whereas the investigated Special Asphalt showed a pronouncedly greater fire risk with respect to causing fire growth and smoke. Thus the question is raised as to whether the use of certain kinds of asphalts in tunnels must be reconsidered. Apart from the binder used, the study also indicates varying the kind of aggregate as a possible route to eliminate the problem.
Dynamic-mechanical material analysis as a basis for a general performance exploration complemented by system testing under superimposed climatic and mechanical loading seems to be a promising interdependent test approach addressing the performance behavior of construction sealants under more realistic conditions. With this contribution an attempt is made to adapt dynamic-mechanical material analysis, which has been already successfully validated for different construction types of expansion joint systems in road and bridge engineering, to the field of construction sealants for building façades. Test results from dynamic-mechanical material analysis characterizing the temperature-dependent, deformation-dependent, and frequency-dependent behavior of structural sealant materials are presented and exemplarily discussed for three different sealant products. An attempt is made to address unknown material characteristics in the multi-dimensional loading matrix representing practical use conditions. Furthermore, the applicability of this test approach and its various complex test modes for the exploration of technological performance and especially estimation of fatigue behavior is verified in several examples. Based on this fundamental material exploration, it is planned to complement the dynamic-mechanical assessment methodology by means of system tests on a section of a structural glazing system subjected to a simplified but superimposed loading function. The technical fundamentals and the procedure proposed to develop an adequate system test mode are introduced. The motivation for these investigations is to identify the actual mechanical system behavior under load combinations and for specimens that both closer resemble reality. The objective is to achieve a consistent and interdependent test program complementary to the existing methodology. Finally, the study is meant to initiate further progress toward a performance-related methodology which considers the design, specification, material, and system selection.
Dynamic-mechanical material analysis as a basis for a general performance exploration complemented by system testing under superimposed climatic and mechanical loading seems to be a promising interdependent test approach addressing the performance behavior of construction sealants under more realistic conditions. With this contribution an attempt is made to adapt dynamic-mechanical material analysis, which has been already successfully validated for different construction types of expansion joint systems in road and bridge engineering, to the field of construction sealants for building façades. Test results from dynamic-mechanical material analysis characterizing the temperature-dependent, deformation-dependent, and frequency-dependent behavior of structural sealant materials are presented and exemplarily discussed for three different sealant products. An attempt is made to address unknown material characteristics in the multi-dimensional loading matrix representing practical use conditions. Furthermore, the applicability of this test approach and its various complex test modes for the exploration of technological performance and especially estimation of fatigue behavior is verified in several examples. Based on this fundamental material exploration, it is planned to complement the dynamic-mechanical assessment methodology by means of system tests on a section of a structural glazing system subjected to a simplified but superimposed loading function. The technical fundamentals and the procedure proposed to develop an adequate system test mode are introduced. The motivation for these investigations is to identify the actual mechanical system behavior under load combinations and for specimens that both closer resemble reality. The objective is to achieve a consistent and interdependent test program complementary to the existing methodology. Finally, the study is meant to initiate further progress toward a performance-related methodology which considers the design, specification, material, and system selection.
More Information about the capability and especially about the dnrabi 1 ity of Structural Sealant Glazing (SSG) Systems are needed. To make a contribution to questions unanswered a suitable System evaluation test is necessary. The Basis for such a test is a load function, vvhich accounts for the decisive loads SSG Systems are exposed to during their working life. This paper proposes a general load function for Standard SSG Systems at central German locations for accelerated durability tests. Decisive loads are determined and different SSG construction types defmed. The performance of these SSG Systems under exposure to externa! loads and to a dynamic pendulum impact is investigated via finite element analyses using a hyperelastic material niodel. The external loads are applied separately and superimposed. Compression, tensile and shear deformations of the sealant are determined. It is found that the sealant is subjected to normal and shear stresses simultaneously. The requirements for a representative specimen are derived. The results will be taken as basics for the development and the construction of a test facility to evaluate the durability of Structural Sealant Glazing Systems.
Structural sealant glazing (SSG) is an impressive technical response to the challenges of modern structural design. The evaluation of fitness for use as well as durability is a precondition for approval of SSG-façades by building authorities because of their special safety relevance. However, the potential of the actual evaluation methodology to reproduce performance as well as durability under real use conditions is generally assessed to be limited. The concept so far is criticized as mainly single-loading and incomplete in comparison to the real use conditions. The exercised separation of the in reality interacting loading effects is assessed as insufficient and inadequate to explore performance. Consequently, the performance and capability of SSG-solutions is only fragmentarily explored. However, the most restricting argument so far is the deficit of the actual test methodology for life cycle prognosis under interacting mechanical as well as climatic loads. Because of the limited acceptance, additional structural design conditions are imposed by the authorities. Besides this restriction, there is also an increasing demand by the authorities, architects, and users for determinable working life cycles, not least under economic aspects. That is why knowledge, particularly regarding SSG-performance and durability, must be expanded. Together with partners representing all branches involved in façade engineering (engineering design, sealant producer, applicator, and cladding company) the Federal Institute for Materials Research and Testing (BAM) develops a new system test focused on the substrate–sealant–glass panel interaction. With it, a new comprehensive dynamic–mechanical evaluation methodology already introduced at the fourth Symposium in Anaheim, CA, in 2011 shall be complemented by a performance-related system test. Subject-matter of this contribution is the presentation of a new dynamic–mechanical system test method and its first experimental application on SSG-systems. We describe our approach beginning with the discussion of relevant load effects on sealant joints and with the help of a highly generalized finite element (FE) analysis. Resulting from a parameter study of various load combinations acting on different SSG-construction types, we derive a practicable deformation load function from the decisive load categories taking into account regular as well as extraordinary loads. Assumptions and procedures to quantify their parameter values (regarding the effective direction and order of deformation magnitude affecting the substrate–sealant–glass bond) are discussed. The calculated decisive sealant deformations resulting from the parameter study are validated by simplified mechanical plausibility tests. Subsequently, the transfer of the findings about the substrate–sealant–glass panel bond loading into the design and construction of an adapted system test specimen and the development of a multifunctional test facility is introduced. The multi-functional applicability of the system test device is discussed. On the basis of results during our actual operational checks, first ideas about system performance and durability under superimposed loading are presented. A validation of this new test methodology by comparison to test results of disassembled samples and in situ results is a task for separate research activities.
More information about the capability and especially about the durability of structural sealant glazing (SSG) systems are needed. To make a contribution to unanswered questions, a suitable system evaluation test is necessary. The basis for such a test is a load function, which accounts for the decisive loads SSG systems are exposed to during their working life. This paper proposes a general load function for standard SSG systems at central German locations for accelerated durability tests. Decisive loads are determined and different SSG construction types defined. The performance of these SSG systems under exposure to external loads and to a dynamic pendulum impact is investigated via finite element analyses using a hyperelastic material model. The external loads are applied separately and superimposed. Compression, tensile, and shear deformations of the sealant are determined. It is found that the sealant is subjected to normal and shear stresses simultaneously. The requirements for a representative specimen are derived. The results will be taken as basics for the development and the construction of a test facility to evaluate the durability of structural sealant glazing systems.
Structural Silicone Glazing (SSG) is a curtain walling method that utilizes silicone sealants to adhere glass, ceramic, metal or composite panels to supporting framing members by means of a peripheral adhesive joint. In SSG curtain walls, silicone sealants serve not only as a weather seal, but also act as a structural bonding element, eliminating the need for exterior retainers and covers.
The paper discusses some essential findings of two recent research studies on the durability and service life of structural silicone glazing sealants and structures. The first study demonstrates, that specimens of a first generation 2-part silicone sealant taken from a SSG façade after 23+2 years of real life successfully passed the European ETAG002-1 performance criteria for residual strength.
In a second study, a new performance-based durability test method was developed in partnership with the Federal Institute for Materials Research Berlin/Germany (BAM). This method is based on simultaneously exposing system test specimens to artificial weathering and complex, multiaxial mechanical loadings. 2-part structural silicone sealants of the first and of the second generation where subjected to this test, which is considered to correspond to an anticipated service life of 50 years.
Structural Silicone Glazing (SSG) is a curtain walling method that utilizes silicone sealants to adhere glass, ceramic, metal or composite panels to supporting framing members by means of a peripheral adhesive joint. In SSG curtain walls, silicone sealants serve not only as a weather seal, but also act as a structural bonding element, eliminating the need for exterior retainers and covers.
The paper discusses some essential findings of two recent research studies on the durability and service life of structural silicone glazing sealants and structures. The first study demonstrates, that specimens of a first generation 2-part silicone sealant taken from a SSG façade after 23+2 years of real life successfully passed the European ETAG002-1 performance criteria for residual strength. In a second study, a new performance-based durability test method was developed in partnership with the Federal Institute for Materials Research Berlin/Germany (BAM). This method is based on simultaneously exposing system test specimens to artificial weathering and complex, multiaxial mechanical loadings. 2-part structural silicone sealants of the first and of the second generation where subjected to this test, which is considered to correspond to an anticipated service life of 50 years.
Fugenfüllsysteme für Fahrbahnbeläge unter höchsten Beanspruchungen bestimmen in zunehmenden Maße die sichere Verfügbarkeit des Autobahnnetzes. Die aktuellen europäischen technischen Regelungen zu deren Verwendbarkeit folgen noch einem spezifikatorischen Ansatz auf empirischen Grundlagen. Es hat sich gezeigt, dass ein solcher Ansatz den Dauerhaftigkeits- und Nutzungsanforderungen nicht mehr entsprechen kann. Der Autor plädiert in seinem Vortrag für einen Paradigmenwechsel hin zu einem funktionsanalytischen Bewertungsansatz. Es werden Vorschläge für eine versuchstechnische Lösung des Problems und die damit verbundenen Chancen für Optimierung und Innovation aufgezeigt.