Filtern
Erscheinungsjahr
Dokumenttyp
- Zeitschriftenartikel (31)
- Posterpräsentation (16)
- Beitrag zu einem Tagungsband (11)
- Vortrag (6)
- Buchkapitel (1)
Schlagworte
- Fluorescence (14)
- Quantum yield (11)
- Dye (9)
- Cement (7)
- Cyanine (5)
- NIR (5)
- Optical probe (5)
- Photoluminescence (5)
- Aggregation (4)
- Hydration (4)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (6)
The commercial availability of stand-alone setups for the determination of absolute photoluminescence quantum yields (φf) in conjunction with the increasing use of integrating sphere accessories for spectrofluorometers is expected to have a considerable influence not only on the characterization of chromophore systems for use in optical and opto-electronic devices, but also on the determination of this key parameter for (bio)analytically relevant dyes and functional luminophores. Despite the huge potential of systems measuring absolute φf values and the renewed interest in dependable data, evaluated protocols for even the most elementary case, the determination of the fluorescence quantum yield of transparent dilute solutions of small organic dyes with integrating sphere methods, are still missing. This encouraged us to evaluate the performance and sources of uncertainty of a simple commercial integrating sphere setup with dilute solutions of two of the best characterized fluorescence quantum yield standards, quinine sulfate dihydrate and rhodamine 101, strongly differing in spectral overlap between absorption and emission. Special attention is dedicated to illustrate common pitfalls of this approach, thereby deriving simple procedures to minimize measurement uncertainties and improve the comparability of data for the broad community of users of fluorescence techniques.
Lumineszenzmethoden und funktionelle Chromophore erlangten in den letzten Jahren breite Anwendungen in den Material- und Lebenswissenschaften wie z.B. in der medizinischen Diagnostik, der Beleuchtungs- und Displaytechnologie, der Photovoltaik oder im Sicherheitsbereich für die Echtheitskodierung. Entscheidend für eine hohe Effizienz und Nachweisempfindlichkeit funktioneller Chromophore ist eine große Helligkeit bzw. Brillanz. Brillante Stoffe zeichnen sich durch eine hohe Absorption des anregenden Lichtes (messbar über den molaren Extinktionskoeffizienten) aus sowie durch eine effiziente Umwandlung des absorbierten Lichtes in Lumineszenzlicht bzw. durch eine große Photolumineszenzquantenausbeute aus. Die Bestimmung der Schlüsselgröße Fluoreszenzquantenausbeute erfolgt i.a. relativ zu einem Farbstoff bekannter Fluoreszenzquantenausbeute über einen Vergleich der absorptionsgewichteten integralen Fluoreszenzspektren von Probe und Standard. Hierfür werden Referenzmaterialien mit zertifizierten Fluoreszenzquantenausbeuten benötigt, die bislang nicht verfügbar sind. Im folgenden werden die laufenden Forschungsarbeiten an einer Serie an Fluoreszenzquantenausbeutestandard vorgestellt, die im Spektralbereich von 350 nm – 1050 nm emittieren. Diese Materialien können auch zur Überprüfung von Ulbrichtkugelmessplätzen eingesetzt werden.
Dye-biomolecule conjugates and NIR-fluorescent particles for targeting of disease-related biomarkers
(2011)
Indispensable for fluorescence imaging are highly specific and sensitive molecular probes that absorb and emit in the near infrared (NIR) spectral region and respond to or target molecular species or processes. Here, we present approaches to targeted fluorescent probes for in vivo imaging in the intensity and lifetime domain exploiting NIR dyes. Screening schemes for the fast identification of suitable fluorophores are derived and design criteria for highly emissive optical probes. In addition, as a signal amplification strategy that enables also the use of hydrophobic NIR fluorophores as fluorescent reporters, first steps towards versatile strategies for the preparation of NIR-fluorescent polymeric particles are presented that can be utilized also for the design of targeted and analyte-responsive probes.
Luminescence techniques are amongst the most commonly used analytical methods in the life and material sciences due to their high sensitivity and their nondestructive and multiparametric character. Photoluminescence signals are, however, affected by wavelength-, polarization- and time-dependent instrument specific effects. This hampers the comparability of fluorescence measurements and calls for simple tools for instrument characterization and the quantification of measured fluorescence intensities. Well characterized fluorescence standards for instrument calibration and performance validation (IPV) can be used also to reference fluorescence signals. Of special importance is the reliable and accurate determination of photoluminescence quantum yields (Ф f), that equals the number of emitted per absorbed photons and presents the key performance parameter for emitter efficiency and the comparison of different luminophores. The determination of Ф f is typically done with the aid of so-called quantum yield standards with well-known Ф f values. These standards can also be applied to evaluate integrating sphere setups, which are increasingly being used for absolute measurements of Ф f values. In this respect, division biophotonics of BAM has certificated a set of Ф f standards, which absorb and fluorescence in the wavelength range from 350 to 1100 nm. In the following, the route to Ф f standards with reliable and traceable Ф f values with a complete uncertainty budget will be presented.
Dye–biomolecule conjugation is frequently accompanied by considerable spectral changes of the dyes absorption spectrum that limit the use of the common photometrical method for the determination of labeling densities. Here, we describe an improvement of this method using the integral absorbance of the dye instead of its absorbance at the long wavelength maximum to determine the concentration of the biomolecule-coupled dye. This approach is illustrated for three different cyanine dyes conjugated to the antibody IgG.
Tricalcium aluminate (C3A) is found with less than 10% wt. of the total composition; however, during hydration, C3A plays an important role in the early hydration of cement in the presence of gypsum as a set retarder.
The aim of this investigation is to assess the suitability of optical spectroscopy and a dye-based optical probe to monitor early hydration of C3A in the presence of gypsum and hemihydrate. Optical evaluation was performed using steady-state fluorescence and diffuses reflectance spectroscopy (UV-VisDR). Phase characterization during hydration was done with in-situ X-ray diffraction. UV-VisDR with a cyanine dye probe was used to monitor the formation of metastable phases and was employed together with fluorescence spectroscopy, to follow the Aggregation and disaggregation of the dye during hydration. In conclusion, for the first time, a cyanine dye was identified as a feasible and stable probe to monitor C3A hydration changes in the presence of calcium sulfate.
Methyl 4-O-methyl-?-Image-ribo-hex-3-ulopyranoside (2), a model compound for partially oxidized anhydroglucose units in cellulose, was crystallized from CHCl3/n-hexane by vapor diffusion to give colorless plates. Crystal structure determination revealed the monoclinic space group P21 with Z=2C8H14O6 and unit cell parameters of a=8.404(2), b=4.5716(10), c=13.916(3) Å, and ?=107.467(4)°. The structure was solved by direct methods and refined to R=0.0476 for 1655 reflections and 135 parameters. The hexulopyranoside occurs in a distorted chair conformation. Both hydroxyls are involved in hydrogen bonding and form zigzag bond chains along the b-axis. One of the two hydrogen bonds is bifurcated. The solid-state 13C NMR spectrum of 2 exhibits eight carbon resonances, with well-separated signals for the two methoxyls (1-OMe: 55.72 ppm, 4-OMe: 61.25 ppm) and a keto resonance with relatively large downfield shift (206.90 ppm). Differences in the C-4 and the methoxyls chemical shifts in the solid and liquid states were found