Filtern
Dokumenttyp
- Zeitschriftenartikel (6) (entfernen)
Schlagworte
- Beton (2)
- Nanotechnologie (2)
- Anti-Graffiti (1)
- Anti-graffiti agent (1)
- Baustoffe (1)
- Brick (1)
- Cleaning efficacy (1)
- Compatibility (1)
- Cultural Heritage (1)
- Festigkeit (1)
Cultural Heritage objects are in many cases invaluable and irrecoverable, therefore their protection is a prior goal. One threat arises by intentionally defacing such objects with graffiti. One possibility to face the imminent threat is the application of a surface protection in form of anti-graffiti systems (AGS). However, the knowledge about the performance and durability of AGS on substrates used for historical buildings is still fragmented. The goal of the presented study was to investigate the performance of a newly developed agent in comparison to a selection of commercial anti-graffiti agents on different substrates, which were used for historical buildings. Four commercial anti-graffiti agents with different chemical formulations were selected and tested with the new agent on different stone and brick substrates. The results showed clearly that AGS based on dense, water vapour impermeable coatings are not suitable to porous substrates such as sandstone, brick or porous limestone due to their impair of the hygric properties and the visual appearance of a substrate. The new agent could not completely reach the cleaning efficacy of the dense coatings but exhibited a much lower impact on the properties of the substrate and was therefore better compatible to historical surfaces.
Wärmebehandlung und Autoklavierung von UHPC - Neue Perspektiven für die Betonfertigteilindustrie
(2011)
Das Gefüge von UHPC ist durch eine dicht gepackte und fehlstellenarme Matrix gekennzeichnet. Eine zusätzliche Optimierung ist durch eine Wärmebehandlung bzw. hydrothermale Nachbehandlung (Autoklavierung) unter einem Wasserdampfsättigungsdruck möglich. Die Wärmebehandlung von Beton ist ein in der Betonfertigteilindustrie geläufiges Verfahren, um die Erstarrungszeit zu verkürzen und höhere Frühfestigkeiten zu erreichen.
Nanotechnologie im Bauwesen
(2008)
Zu den Zielen der Nanotechnologie gehört die Entwicklung, Produktion und Anwendung von Materialien und Werkstoffen mit völlig neuartigen Leistungsspektren. Für die Baupraxis und die Materialforschung lassen sich über den Einsatz der Nanotechnologie Ziele wie die Optimierung von Baustoffeigenschaften, Vermeidung von Schäden und neue Funktionalitäten definieren. Der vorliegende Beitrag gibt einen Überblick über mögliche Anwendungsbereiche der Nanotechnologie im Bausektor, wie z. B. zementgebundene Baustoffe, Außen- und Dachfassaden, Fenster und Verglasungen, Brandschutz, Inneneinrichtung und Infrastrukturbau. Zudem werden aktuelle Forschungsarbeiten mit nanowissenschaftlichem und nanotechnologischem Schwerpunkt im Bereich baustoffbezogener Materialien der Bundesanstalt für Materialforschung und -prüfung (BAM) in Berlin vorgestellt. Die Forschungstätigkeiten beziehen sich zum einen auf die Modifikation der Hydratphasen in Ultra-Hochleistungsbeton (UHPC) und zum anderen auf die Weiterentwicklung von Anti-Graffiti-Systemen.