Filtern
Erscheinungsjahr
Dokumenttyp
- Beitrag zu einem Tagungsband (36) (entfernen)
Schlagworte
- OTDR (10)
- OFDR (7)
- Optical fiber sensor (7)
- Strain sensor (6)
- Structural health monitoring (6)
- Distributed sensor (5)
- Distributed strain sensor (4)
- Optical fiber sensors (4)
- POF (4)
- POF sensors (4)
Organisationseinheit der BAM
The presented research is carried out on the background of the development of a new strain sensor, integrated in technical textiles using the optical time domain reflectometry (OTDR) technique. We investigated the effect of increased scattering in POF due to applied strain as a distributed sensor including research on long-term stability and reliability of this sensor.
Recently, we have proposed, to our knowledge for
the first time, to use perfluorinated graded-index polymer
optical fiber (POF) for distributed measurement of strain.
Thanks to their low attenuation and low modal dispersion
compared to standard-POF, this fiber type allows to extend the
measurement length to more than 500 meters at increased
spatial resolution. In this paper, two mechanisms for strain
sensing are introduced. As in standard PMMA POF, strain in the
fiber can be detected by evaluating the local backscatter
increase occurring at strained fiber sections. Further, we
propose, to our knowledge for the first time, a true distributed
length change measurement in POF using cross-correlation
analysis of the fibers characteristic backscatter signature.
Using this technique, it is possible to measure relative
displacement between different fiber sections avoiding signal
fading failures that are inherent in other measurement
principles. Cross-sensitivities to the sensor signal, as fiber
bends and temperature, are investigated and quantified.
Sensing characteristics of standard polymer
optical fibers (POF) are further studied using the optical time
domain reflectometry (OTDR) technique. The level of the
backscattering inside POF, which highly increases at locations
where strain is applied to the fiber, is further investigated with
respect to spectral behavior, strain rate and span of time from
the stretching event. An algorithem to overcome the problem of
the decrease of spatial resolution as a result of pulse
broadening due to modal disperion, is proposed. The research
is carried out on the background of the development of a new
strain sensor that is integrated in technical textiles.
Protection of critical infrastructure using fiber optic sensors embedded in technical textiles
(2010)
Terrorists and criminals more and more attack and destroy important infrastructures like routes, railways, bridges, tunnels, dikes and dams, important buildings. Therefore, reliable on-line and long-term monitoring systems are required to protect such critical infrastructures. Fiber optic sensors are well-suited for that. They can be installed over many kilometers and are able to measure continuously distributed strain, pressure, temperature and further mechanical and physical quantities. The very tiny optical fibers can be integrated into structures and materials and can provide information about any significant changes or damages of the structures. These so-called smart materials and smart structures are able to monitor itself or its environment. Particularly smart technical textiles with embedded fiber optic sensors have become very attractive because of their high importance for the structural health monitoring of geotechnical and masonry infrastructures. Such textiles are usually used for reinforcement of the structures; the embedded fiber optic sensors provide information about the condition of the structures and detect the presence of any damages and destructions in real time. Thus, critical infrastructures can be preventively protected. The paper will introduce this innovative field and will present the results achieved within several German and European projects.