Filtern
Erscheinungsjahr
Dokumenttyp
- Zeitschriftenartikel (143)
- Vortrag (51)
- Beitrag zu einem Tagungsband (30)
- Beitrag zu einem Sammelband (28)
- Posterpräsentation (13)
- Buchkapitel (10)
Schlagworte
- Femtosecond laser (28)
- Laser-induced periodic surface structures (LIPSS) (26)
- Femtosecond laser ablation (24)
- Laser ablation (23)
- Laser processing (14)
- Radiation protection (12)
- Silicon (11)
- Laser cleaning (10)
- Ablation (9)
- Materialbearbeitung (9)
- Surface functionalization (9)
- Laser-induced X-ray emission (8)
- Nanosecond laser (8)
- Nanostructures (8)
- Ultrashort laser pulses (7)
- Laser (6)
- Röntgenstrahlung (6)
- Titanium (6)
- Ultrakurze Laserpulse (6)
- Femtosecond pulse laser (5)
- Femtosekundenlaser (5)
- High-speed optical techniques (5)
- Laser beam effects (5)
- Laser safety (5)
- Laser-induced periodic surface structures (5)
- Paper (5)
- Steel (5)
- Strahlenschutz (5)
- CIGSe (4)
- Chalcopyrite (4)
- DDT (4)
- Double-pulse experiments (4)
- Femtosecond laser processing (4)
- Friction (4)
- Laser-induced periodic surface structures, LIPSS (4)
- Laserreinigung (4)
- Micro solar cell (4)
- Microstructures (4)
- Polymer (4)
- Semiconductors (4)
- Tribology (4)
- Ultrafast optical techniques (4)
- Ultrakurzpulslaser (4)
- Ultrashort laser material interaction (4)
- X-ray emission (4)
- Abschirmung (3)
- Aluminium (3)
- Applications (3)
- Biofilms (3)
- Bone implant (3)
- Cleaning (3)
- Copper-indium-gallium-diselenide (3)
- Damage (3)
- Damage threshold (3)
- Dielectrics (3)
- Femtosecond (3)
- Femtosecond laser patterning (3)
- Fused silica (3)
- Incubation (3)
- Laser-induced damage threshold (3)
- Laser-induced forward transfer (3)
- Laser-induced forward transfer (LIFT) (3)
- Laser-induzierte Röntgenstrahlung (3)
- Laserschutz (3)
- Light concentration (3)
- Mach-Zehnder interferometer (3)
- Micromachining (3)
- Microphone (3)
- Oxidation (3)
- Photovoltaics (3)
- Secondary hazard (3)
- Silicon compounds (3)
- Silk (3)
- Surface morphology (3)
- Surface structure (3)
- Threshold (3)
- Titanium alloy (3)
- Titanium nitride (3)
- Ultrakurze Laserimpulse (3)
- Ultrashort pulse laser processing (3)
- Ultrashort pulsed laser (3)
- Wear (3)
- Acoustic measurement (2)
- Aluminium oxide (2)
- Auge (2)
- Auger electron spectroscopy (2)
- Bioceramic coating (2)
- Calcium phosphate (2)
- Cell adhesion (2)
- Decontamination (2)
- Doping (2)
- Elemental semiconductors (2)
- Femtosecond-Pulse Laser (2)
- Fluid transport (2)
- Glass (2)
- Glasses (2)
- Image enhancement (2)
- Image restoration (2)
- Indium phosphide (2)
- Laser damage (2)
- Laser impact on surfaces (2)
- Laser micromachining (2)
- Laser-beam impact phenomena (79.20.Ds) (2)
- Laser-induced x-ray emission (2)
- Lasersicherheit (2)
- Material processing (2)
- Medizinische Anwendung (2)
- Micro solar cells (2)
- Micro-concentrator solar cell (2)
- Multimode fiber (2)
- Multispectral imaging (2)
- Nanosekundenlaser (2)
- Niobium (2)
- Optical fiber (2)
- Optical multimode fiber (2)
- Optical properties (2)
- Pacemaker (2)
- Physical radiation damage (2)
- Physical radiation damage (61.80.-x) (2)
- Polaritons (2)
- Pulslaser (2)
- Radiation treatment (2)
- Röntgenemission (2)
- Scanning electron microscopy (2)
- Schutzbrille (2)
- Second harmonic generation (SHG) (2)
- Selective emitter (2)
- Silica (2)
- Silica glass (2)
- Silicon oxide (2)
- Solar cell (2)
- Subpicosecond laser ablation (2)
- Surface plasmon polaritons (2)
- Surface plasmons (2)
- Surface texture (2)
- Surface wetting (2)
- Textiles (2)
- Ultra-short pulse laser processing (2)
- Ultrafast phenomena (2)
- Wooden artworks (2)
- X-ray photoelectron spectroscopy (2)
- Zahn (2)
- (LIPSS) (1)
- Ab initio calculations (1)
- Absorber optimization (1)
- Acoustical measurement (1)
- Ageing (1)
- Aluminium alloys (1)
- Amorphization (1)
- Amorphous (1)
- Ancient manuscripts (1)
- Anodic oxidation (1)
- Anodization (1)
- Antibacterial surfaces (1)
- Application (1)
- Arbeitsschutz (1)
- Artificial soiling (1)
- Atomic force microscopy (1)
- Bacterial adhesion (1)
- Barium aluminium borosilicate glass (1)
- Bariumalumoborosilicate glass (1)
- Bariumalumoborosilicate glass surfaces (1)
- Bending strength (1)
- Bioaktives Material (1)
- Bioceramics (1)
- Biochemical reaction mechanisms and kinetics (1)
- Biofilm (1)
- Bioinspiration (1)
- Biologische Anwendungen (1)
- Biomedizin (1)
- Biomimetic surfaces (1)
- Biomometics (1)
- Bionic materials (1)
- Biosensor (1)
- Bone (1)
- Bor (1)
- Bug (1)
- CHOCLAB (1)
- CIGSe micro solar cells (1)
- Calcium compounds (1)
- Calcium phosphate coating (1)
- Carbon (81.05.Uw) (1)
- Carrier excitation (1)
- Central Asia (1)
- Cleaning threshold (1)
- Coatings (1)
- Cold atmospheric pressure plasma (1)
- Colorimetry (1)
- Conduction bands (1)
- Conservation (1)
- Copper indium gallium diselenide (CIGSe) (1)
- Copper-indium-gallium-diselenide (CIGSe) (1)
- Crystallization (1)
- Cu(In,Ga)Se2 (1)
- CuInSe2 (1)
- Cultural heritage (1)
- Defect model (1)
- Degree of polymerization (1)
- Dentistry (1)
- Diamond-like carbon (1)
- Diffusion (1)
- Doping thin films (1)
- Double-pulse (1)
- Dry Etching (1)
- Dünnfilm, diamantartig (1)
- Dünnfilmtechnologie (1)
- Dünnschicht, halbleitend (1)
- Dünnschicht, metallisch (1)
- EN 12254 (1)
- EN 207 (1)
- EN 208 (1)
- Editorial (1)
- Electrochemistry (1)
- Electromagnetic scattering (1)
- Ellipsometrie (1)
- Etch Process (1)
- European Materials Research Society (E-MRS) (1)
- European standard (1)
- Eye protection (1)
- FS-laser ablation (1)
- Farbmessung (1)
- Fatigue (1)
- Fatigue testing (1)
- Femtosecond pulses (1)
- Femtosekunden (1)
- Femtosekundenpulslaser (1)
- Fermi-Level Pinning (1)
- Fiber waveguides (1)
- Fiber waveguides (42.81.Qb) (1)
- Fictive temperature (1)
- Filter (1)
- Filterpapier (1)
- Fourier transforms (1)
- Fs-laser patterning (1)
- Glasfilter (1)
- Glass transitions (1)
- Glasses (81.05.Kf) (1)
- Glucose (1)
- Gold films (1)
- Hadernpapier (1)
- Hard X-ray photoelectron spectroscopy (HAXPES) (1)
- Heat affected zone (1)
- Hierarchical micro-nanostructures (1)
- Holz (1)
- Holzhaltiges Papier (1)
- Hydrocarbons (1)
- ISO 11254-2 (1)
- Implantat (1)
- Indium (1)
- Indium islands (1)
- Indium preferential nucleation (1)
- Industrial applications (1)
- Interfacial Electronic States (1)
- Interferometer (1)
- Justierbrille (1)
- Knochenersatz (1)
- Kohlenstoffschichten (1)
- Kunststoffschicht (1)
- Kurzpulslaser (1)
- LIDT (1)
- LIFT (1)
- Laser Machining (1)
- Laser Processing (1)
- Laser beam machining (1)
- Laser induced damage (1)
- Laser irradiation surface effects (1)
- Laser materials (1)
- Laser materials processing (1)
- Laser pulses (1)
- Laser spallation (1)
- Laser treatment (1)
- Laser-Ablation (1)
- Laser-Material-Bearbeitung (1)
- Laser-Materialbearbeitung (1)
- Laser-beam impact phenomena (1)
- Laser-induced damage (1)
- Laser-induced fixation (1)
- Laser-induced nanostructures (1)
- Laser-induced oxide layer (1)
- Laser-induced periodic surface strctures (LIPSS) (1)
- Laser-induced periodic surface strcutures (LIPSS) (1)
- Laser-material interactions (1)
- Laser-modified surface (1)
- Laserinduzierte Zerstörschwelle (1)
- Lasermaterialbearbeitung (1)
- Lasermikrobearbeitung (1)
- Lasersintern (1)
- Lasertechnik (1)
- Lichtwellenleiter (1)
- Lizard (1)
- MOS Diode (1)
- Materials processing (1)
- Mechanical stress (1)
- Melting (1)
- Membrane perforation (1)
- Metallprothese (1)
- Metals (1)
- Michelson interferometer (1)
- Micro-concentrator (1)
- Microbial adhesion tests (1)
- Microbial adhesions (1)
- Microconcentrator solar cell (1)
- Microscopy (1)
- Microsecond laser (1)
- Microstructuring (1)
- Mikrobearbeitung (1)
- Mikroskopie (1)
- Molybdenum substrate (1)
- Multi-Photon Absorption (1)
- Multicrystalline silicon (1)
- Multiple-pulse damage (1)
- Nanosecond Pulses (1)
- Nanosecond laser cleaning (1)
- Nanostrcutures (1)
- Nd:YAG laser (1)
- Nd:YAG-Laser (1)
- Nonlinear Electroreflectance (1)
- Oberflächenstrukturierung (1)
- Ophthalmology (1)
- Optical breakdown (1)
- Optical coatings (1)
- Optical constants (78.20.Ci) (1)
- Optical fibers (1)
- Optical microscopy (1)
- Optical proper (1)
- Optics at surfaces (1)
- Optische Konstanten (1)
- Optische Multimodefaser (1)
- Orthopaedics (1)
- Oxide (1)
- Oxide growth (1)
- Papery (1)
- Parchment (1)
- Personal protective equipment (1)
- Photochemical reactions of biomolecules (1)
- Photoelektron spectroscopy (1)
- Photovoltaik (1)
- Physical vapor deposition (1)
- Picture Post Card (1)
- Pigments (1)
- Polarisation (1)
- Poly(methylmetacrylate) (1)
- Polycarbonate (1)
- Polyethylene (1)
- Polymer ablation (1)
- Polymerfilter (1)
- Polymers (1)
- Polymers-radiation effects (1)
- Polymethylmethacrylate (1)
- Probekörper (1)
- Prosthetics (1)
- Protection housing (1)
- Pulse Laser (1)
- Pulse duration (1)
- Radiation treatment (81.40.Wx) (1)
- Refractive index (1)
- Reproducibility (1)
- Ripples (1)
- Rods (structures) (1)
- Round-robin experiment (1)
- S on 1-LIDT (1)
- SHG (1)
- SIMS (1)
- Scanning Auger electron microscopy (1)
- Second-Harmonic Generation (1)
- Sekundärstrahlung (1)
- Semiconductor (1)
- Semiconductor electrode (1)
- Silicon nitride (1)
- Silicon solar cell (1)
- Silk Road (1)
- Simulation (1)
- Single- and multi-shot ablation (1)
- Solid electrolyte interface (1)
- Solid-state plasma (1)
- Spectroscopic imaging ellipsometry (1)
- Spectroscopy (1)
- Spot size (1)
- Spring Meeting 2016 (1)
- Structuring (1)
- Sub-Picosecond-Pulse Laser (1)
- Subpicosecond-Pulse Laser (1)
- Superconductivity (1)
- Surface and interface chemistry of polymers (1)
- Surface plasmon polariton (1)
- Surface processing (1)
- Surface superconductivity (1)
- Surface treatment (1)
- Technische Materialien (1)
- Textile (1)
- Thin films (1)
- Threshold fluence (1)
- Threshold of silicon (1)
- Ti-6Al-4V alloy (1)
- Ti6Al4V alloys (1)
- Ti:sapphire laser (1)
- Time-of-flight secondary ion mass spectrometry (ToF-SIMS) (1)
- Time-resolved measurements (1)
- Time-resolved reflectivity measurements (1)
- Titanium alloys (1)
- Titanium nitride films (1)
- Treshold (1)
- Tungsten (1)
- Ultrashort lasers (1)
- Ultrashort pulse laser (1)
- Vanadium alloys (1)
- Verrußung (1)
- Viscometry (1)
- Wall paintings (1)
- Wandmalerei (1)
- Water (1)
- Wetting (1)
- Wood (1)
- X-ray (1)
- X-ray diffraction (1)
- X-ray emission hazards (1)
- X-ray energies (1)
- X-ray spectrum (1)
- fused silica (1)
- laser damage (1)
- lossy materials (1)
- nanosecond laser (1)
- optical fiber (1)
- plasmon lifetime (1)
- surface plasmon polaritons (1)
Organisationseinheit der BAM
- 6 Materialchemie (56)
- 6.2 Material- und Oberflächentechnologien (56)
- 9 Komponentensicherheit (4)
- 9.5 Tribologie und Verschleißschutz (4)
- 6.7 Materialsynthese und Design (3)
- 4 Material und Umwelt (2)
- 4.1 Biologische Materialschädigung und Referenzorganismen (2)
- 6.1 Oberflächen- und Dünnschichtanalyse (2)
- 5 Werkstofftechnik (1)
- 5.1 Mikrostruktur Design und Degradation (1)
Paper des Monats
- ja (3)
Single- and multi-shot ablation thresholds of gold films in the thickness range of 311400 nm were determined employing a Ti:sapphire laser delivering pulses of 28 fs duration, 793 nm center wavelength at 1 kHz repetition rate. The gold layers were deposited on BK7 glass by an electron beam evaporation process and characterized by atomic force microscopy and ellipsometry. A linear dependence of the ablation threshold fluence Fth on the layer thickness d was found for d ≤ 180 nm. If a film thickness of about 180 nm was reached, the damage threshold remained constant at its bulk value. For different numbers of pulses per spot (N-on-1), bulk damage thresholds of ~0.7 J cm-2 (1-on-1), 0.5 J cm-2 (10-on-1), 0.4 J cm-2 (100-on-1), 0.25 J cm-2 (1000-on-1), and 0.2 J cm-2 (10000-on-1) were obtained experimentally indicating an incubation behavior. A characteristic layer thickness of Lc 180 nm can be defined which is a measure for the heat penetration depth within the electron gas before electronphonon relaxation occurs. Lc is by more than an order of magnitude larger than the optical absorption length of α-1 12 nm at 793 nm wavelength.
A promising technology in photovoltaics is based on micro-concentrator solar cells, where the photovoltaic active area is realized as an array of sub-millimeter sized thin-film solar cells. Different approaches to produce micro-sized precursors of CIGSe absorbers on molybdenum are presented using 30-fs laser pulses at 790 nm wavelength. On the one hand, a multi pulse surface structuring of the molybdenum or the underlying glass substrate and a subsequent physical vapor deposition (PVD) process were used for a site-selective aggregation of indium droplets. On the other hand, a single pulse laser-induced forward transfer (LIFT) was utilized to selectively deposit combined copper/indium/gallium precursor pixels on the molybdenum back contact of the solar cell. It was demonstrated that a postprocessing of the laser-generated micro-sized precursors results in an array of working CIGSe solar cells with an efficiency of 2.9% for 1 sun Illumination.
Micro-concentrator solar cells offer an attractive way to further enhance the efficiency of planar-cell technologies while saving absorber material. Here, two laser-based bottom-up processes for the fabrication of regular arrays of CuInSe2 and Cu(In,Ga)Se2 microabsorber islands are presented, namely one approach based on nucleation and one based on laser-induced forward transfer.
Additionally, a procedure for processing these microabsorbers to functioning micro solar cells connected in parallel is demonstrated. The resulting cells show up to 2.9% efficiency and a significant efficiency enhancement under concentrated Illumination.
Laser texturing is an emerging technology for generating surface functionalities on basis of optical, mechanical, or chemical properties. Taking benefit of laser sources with ultrashort (fs) pulse durations features outstanding precision of machining and negligible rims or burrs surrounding the laser-irradiation zone. Consequently, additional mechanical or chemical post-processing steps are usually not required for fs-laser surface texturing (fs-LST). This work aimed to provide a bridge between research in the field of tribology and laser materials processing. The paper reviews the current state-of-the-art in fs-LST, with a focus on the tribological performance (friction and wear) of specific self-organized surface structures (so-called ripples, grooves, and spikes) on steel and titanium alloys. On the titanium alloy, specific sickle-shaped hybrid micro-nanostructures were also observed and tribologically tested. Care is taken to identify accompanying effects affecting the materials hardness, superficial oxidation, nano- and microscale topographies, and the role of additives contained in lubricants, such as commercial engine oil.
In recent years, femtosecond lasers matured from sensitive research setups to turnkey systems for an increasing number of applications. Now that running an ultra-short pulse laser system needs no longer a specialized scientist, safety issues become more crucial. Ultrashort laser pulses have extremely high peak powers and even scattered radiation may possess severe risks to the unprotected eye. Accordingly,
special protection schemes are necessary for these unique laser systems.
A promising technology in photovoltaics is based on micro-concentrator solar cells, where the photovoltaic active area is realized as an array of sub-millimeter sized cells onto which the incident light is focused via microlenses. This approach allows to increase the cell efficiency and to realize much more compact modules compared to macroscopic concentrator devices. At the same time, expensive raw materials can be saved, which is of interest, for example, with respect to indium in the case of copper-indium-gallium-diselenide (CIGSe) thin film solar cells. Two methods to produce micro-sized precursors of CIGSe absorbers on molybdenum are presented using 30-fs laser pulses at 790 nm wavelength. On the one hand, a multi pulse surface structuring of the molybdenum film or the underlying glass substrate and a subsequent physical vapor deposition were used for a site-selective aggregation of indium droplets. On the other hand, a single pulse laser-induced forward transfer was utilized to selectively deposit combined copper-indium precursor pixels on the molybdenum back contact of the solar cell. Post-processing (selenization, isolation, contacting) of the laser-generated micro-sized precursors results in functional CIGSe solar cells.
A bottom-up approach is presented for the production of arrays of indium islands on a molybdenum layer on glass using 30-fs laser pulses at 790 nm wavelength. The indium islands can serve as micro-sized precursors for indium compounds such as copper-indium-gallium-diselenide (CIGSe) used in photovoltaics. Molybdenum is the standard back contact material of CIGSe solar cells. Femtosecond laser ablation of glass and a subsequent deposition of a molybdenum film or direct laser processing of the molybdenum film both allow the preferential nucleation and growth of indium islands at the predefined locations in a following indium-based physical vapor deposition (PVD) process. A proper choice of laser and deposition parameters ensures the controlled growth of indium islands exclusively at the laser ablated spots. Based on a statistical analysis, these results are compared to the non-structured molybdenum surface, leading to randomly grown indium islands after PVD.
A bottom-up approach to produce arrays of indium islands on a molybdenum layer on glass using 30-fs laser pulses at 790 nm wavelength is presented. These islands can serve as micro-sized precursors for indium compounds such as copper-indium-gallium-diselenide (CIGSe) used in photovoltaics. Molybdenum is the standard back contact material of CIGSe solar cells. Femtosecond laser ablation of glass and a subsequent deposition of a molybdenum film or direct laser processing of the molybdenum film both allow the preferential nucleation and growth of indium islands at the predefined locations in a following indium-based physical vapor deposition (PVD) process. A proper choice of laser and deposition parameters ensures the controlled growth of indium islands exclusively at the laser ablated spots. Based on a statistical analysis, these results are compared to the non-structured molybdenum surface, leading to randomly grown indium islands after PVD.
The irradiation of ~0.9-µm-thick hydrogenated amorphous carbon (a-C:H) layers deposited on silicon substrates with single femtosecond (fs) laser pulses (35 fs pulse duration, 790 nm centre wavelength) in air is studied experimentally. Irradiation spots have been generated with different peak fluences and subsequently investigated by optical topometry, micro Raman spectroscopy and microscale mechanical indentation in order to evaluate their microscopic, topographical, structural and mechanical properties (e.g. elastic modulus). By this multi-method approach, a clear separation of different effects (delamination and graphitisation) becomes possible. The joint application of mechanical and spectroscopic techniques provides unique insights into the effects of the fs-laser radiation on the carbon layer.
Optical filters and fabrics are important parts of laser safety equipment such as goggles and curtains. A choice of these materials with varying absorption spectra is investigated with respect to their resistance to Ti:sapphire femtosecond laser radiation (800 nm wavelength, 1 kHz repetition rate). Pulse durations down to 30 fs and multiple-pulse irradiation conditions are employed to evaluate technically relevant damage thresholds. The ablation threshold fluences of the absorbing filters are comparable to those observed for transparent materials with 30-fs-pulses. These investigations together with scanning electron microscopy of the surface morphology after laser treatment provide insight into the interaction mechanism of the short pulses with the materials.
Micromachining experiments were performed with Ti:sapphire laser pulses (130 fs - 150 fs, 800 nm, approximately 10 Hz) in air. Employing the direct focusing technique, highly absorbing titanium nitride (TiN) and weakly absorbing polyimide (PI) and polymethylmethacrylate (PMMA) served as target materials. The lateral and vertical precision of the laser ablation and morphological features were characterized by scanning force (SFM), scanning electron (SEM) and optical microscopy. For TiN, incubation can be observed, i.e. the single-pulse surface damage threshold (0.26 J/cm2) is by a factor of two greater than the threshold for 100 pulses. Ablation rates below 10 nm per pulse can be achieved. The evolution of sub-wavelength ripples is presented in dependence on pulse number and laser fluence, respectively. The incubation behavior of the polymers can be described by an accumulation model as for TiN. Experiments on PI with varying focal lengths result in the same modification thresholds. Different polarization states of light (linear, circular) lead to a variation of the ablation rate and to various morphological patterns in the ablation craters (wavelength ripples, cones). Swelling of PMMA occurred at fluences below the ablation threshold.
Femtosecond laser interaction with silicon was investigated in water and in air, with 130-fs laser pulses at 800 nm wavelength. Under water confinement, higher modification thresholds, lower ablation depths and similar incubation factors were found in comparison to the dry experiment. Morphological features of the laser-induced cavities also differed. In contrast to air experiments, debris redeposition was negligible, while the ablated material remained suspended in the water layer phase. Underwater cavities obtained at high fluences and high number of pulses per spot showed anomalous profiles, consistent with a strong spatial deformation of the laser beam coupled into the target. Ripples formed at the edges of the modified area showed varying spacings: f100 and f700 nm for water and air experiments, respectively. Differences to the air experiment were related to a complex combination of fluence-dependent non-linear effects occurring in the water layer and to pulse-number-dependent shielding effects induced by cavitation bubbles and suspended ablated
material.
Textile, aluminium and polyethylene used as components in laser protection curtains were investigated with respect to their ablation behaviour. Employing 33-fs pulses (800 nm wavelength, 1 kHz repetition rate), ex situ geometrical measurements of the ablation cavities and in situ acoustic investigations with a microphone were performed to determine the ablation thresholds in the single- and multi-pulse cases. The acoustical method proved advantageous for complex surface morphologies and/or single laser pulse interactions. Incubation phenomena can be observed for all the materials studied. Technically relevant multi-pulse ablation thresholds are presented and are compared with the single-pulse (1-on-1) irradiation.
Femtosecond lasers provide a novel method of attaching bioceramic material to a titanium alloy, thereby improving the quality of bone implants. The ultrashort 30 fs laser pulses (790 nm wavelength) penetrate a thin dip-coated layer of fine ceramic powder, while simultaneously melting a surface layer of the underlying metal. The specific adjustment of the laser parameters (pulse energy and number of pulses per spot) avoids unnecessary melting of the bioactive calcium phosphate, and permits a defined thin surface melting of the metal, which in turn is not heated throughout, and therefore maintains its mechanical stability. It is essential to choose laser energy densities that correspond to the interval between the ablation fluences of both materials involved: about 0.1-0.4 J cm-2. In this work, we present the first results of this unusual technique, including laser ablation studies, scanning electron microscopy and optical microscope images, combined with EDX data.