Filtern
Dokumenttyp
Sprache
- Englisch (3)
Referierte Publikation
- ja (3) (entfernen)
Schlagworte
- BLDC (1)
- Fiber optical sensing (1)
- Gas storage areas (1)
- Large scale soil test field (1)
- Membrane-based gas sensing (1)
- Motor control (1)
- PMSM (1)
- Sensor aiming (1)
- Sensor alignment (1)
- Sensor orientation (1)
Organisationseinheit der BAM
One of the main unsolved issues of under-ground storages for, e.g., CO2, H2, and natural gas is the comprehensive surveillance of these areas with reasonable effort and costs. Conventional sensors (e.g., soil air probes or borehole probes), however, can only be used for punctual or locally limited measurements; further their application can cause structural influences (invasive application).
In this paper, we describe in detail the setup of a CO2 injection soil test field. This test field will be used to enhance and validate an innovative ap-proach for distributed subsurface monitoring of gas storage areas. To the author’s knowledge, this is the first time that, for this purpose, a test field is built in an application relevant scale.
In mobile robot applications, some sensors such as open-path gas detectors or laser rangefinders need to be aimed at specific targets in order to get the desired measurements. To do this in a fast and elegant manner, we present a spherical parallel manipulator with three degrees of freedom. Compared to typical serial manipulators, it offers superior dynamics and structural stiffness, which are important parameters for this type of task. We present the mechanical design and derive kinematic equations both to compute set-points for the desired orientation and to estimate the current state of the system. A PID controller is used to generate control signals.
A current-independent torque equation for the permanent-magnet synchronous motor (PMSM) aiming at direct-drive servo applications is derived from a first principles model. Instead of measuring currents, all required control parameters are derived from optical incremental encoder measurements. The results are verified on a real system in test series showing the effect of static friction and proving the obtained torque model.