Filtern
Dokumenttyp
Sprache
- Englisch (4)
Referierte Publikation
- ja (4)
Schlagworte
- Container inspection (4) (entfernen)
Radiologic evaluation techniques are nondestructive testing (NDT) used to detect the bulk of explosives and contraband materials in large objects. As compared to conventional low-energy (<450 key) X-ray imaging, high-energy (>1 MeV) digital X-ray radiography is required for the NOT of large containers because of the need for high penetration through thick materials, sensitivity, and the ability to distinguish between low-and high-Z materials. Mobile, high-energy, and high-resolution radiologic techniques are useful to detect contraband and threat materials in digital radiographic images of containers with complex packing. This paper presents a mobile, high-energy X-ray radiographic technique for the in-field nondestructive inspection of cargo containers. The developed experimental technique consisted of a betatron as a high-energy (7.5 MeV) X-ray source and a high-resolution (400 mu m) matrix detector for the digital X-ray imaging. In order to evaluate the detection efficiency and image quality of the measurement technique, a test specimen was proposed that was made of a 3 mm thick steel container with an inner dimension of 60 x 30 x 40 cm(3) comprising different low-and high-Z materials. Image quality indicators were used to assess the essential image quality parameters such as image basic spatial resolution, effective attenuation coefficient, and signal-to-noise ratio (SNR). Experimental investigations were performed on a 6.1 m sea freight container with mockup dangerous materials in complex packing. Preliminary experimental results showed that the proposed technique was able to distinguish between liquids and solids, as well as detect contraband materials. Furthermore, a remarkable SNR of 400 was achieved in the measured digital X-ray images. The influence of temperature on X-ray radiation dose rate at different X-ray energies was also investigated. Finally, important applications of the proposed technique in the context of maritime security are discussed.
The research and development (R&D) in the field of safety and security of sea-freight Containers has gained more importance after the U.S. house resolution 1 (H.R.1). According to this law, all the freight Containers which are transported from non-U.S. port of origin to U.S. ports should be inspected 100% against explosive and contraband materials using non-intrusive imaging equipment and radiation detectors. As the port of Hamburg and Bremerhaven are the leading Container ports in Europe, it is essential to develop reliable and high-resolution detection technologies for the non-destructive inspection of large sea-freight Containers.
In the context of the German aviation security research and development project SILUFRA (secure air freight transport chains), BAM has developed a high-resolution and high-energy X-ray imaging technology for the reliable detection of dangerous and illicit materials in densely packed air freight containers. In the developed technology, a novel combination of high-energy (2-7.5 MeV) X-ray betatron as the radiation source and a high-resolution digital detector array (DDA) for the X-ray imaging was utilized to improve the probability of detecting contraband and explosive materials by enhancing the spatial and contrast resolution in the digital X-ray image. In addition, flexible rotations of the high-energy X-ray source and the digital detector array can lead to clarify the suspicious region of interest (ROI) in air freight containers efficiently. Thus, reduces the false alarm rates and the need for expensive manual inspections of the whole container load. In order to evaluate the detection efficiency, we carried out the experimental investigations on a real air freight container loaded with typical cargo materials such as heavy automobile components and electronic products as well as mock-up dangerous and contraband materials. Furthermore, the material discrimination in the radiographic images was evaluated based on the dual high-energy X-ray imaging method. Finally, important applications of the proposed imaging technology to the air cargo security are discussed
In this contribution, we present a dual high-energy X-ray imaging technique for cargo container inspection using the 'spectral high-energy X-ray attenuation method'. This method is based on attenuation of continuous highenergy spectra. The developed experimental technique consists of a betatron as high-energy (up to 7.5 MeV) X-ray source and a matrix detector with high spatial resolution (400 ìm) for digital X-ray imaging. In order to evaluate the material discrimination capability using dual high-energy X-ray imaging, a test specimen is proposed, comprising step wedges of different low and high atomic number (Z) materials. The selected X-ray spectra for the dual-energy experiments correspond to 3 MV and 7.5 MV acceleration potential of the betatron. We evaluated the ratio between low- and high-energy X-ray attenuation coefficients quantitatively based on simulated poly-energetic high-energy X-ray source spectra and the detector sensitivity using the 'analytical Radiographic Testing inspection simulation tool' (aRTist) developed at BAM. The simulated effective attenuation coefficients are compared with corresponding experimental results in order to establish a method for identification of low- and high-Z materials in the container. Finally, important applications of the proposed technique in the context of aviation security are discussed.