Filtern
Dokumenttyp
Schlagworte
- Klebfestigkeit (5)
- Haftfestigkeit (4)
- Zentrifugentechnologie (4)
- Bonding strength (3)
- Centrifuge technology (3)
- Adhesive strength (2)
- High pressure airborne ultrasound (2)
- Härteprüfung (2)
- Mehr-Proben-Prüfung (2)
- Multi-sample approach (2)
Organisationseinheit der BAM
In this contribution we present a novel thermo-acoustic approach for the generation of broad band airborne ultrasound and investigate the applicability of resonance-free thermo-acoustic emitters for very short high pressure airborne ultrasound pulses. We report on measurements of thermo-acoustic emitter consisting of a 30 nm thin metallic film on a usual soda-lime glass substrate, generating sound pressure values of more than 140 dB at 60 mm distance from the transducer and compare the results with conventional piezoelectric airborne ultrasound transducers. Our experimental investigations show that such thermo-acoustic devices can be used as broad band emitters using pulse excitation.
A novel approach for the generation of broadband airborne ultrasound by using the thermo-acoustic effect is presented in this contribution. We investigate the applicability of resonance-free thermo-acoustic emitters for generation of very short high pressure airborne ultrasound pulses. A thermoacoustic emitter consisting of a 30 nm thin metallic film on a usual soda-lime glass substrate generates sound pressure values of more than 140 dB at 60 mm distance. The results are compared with conventional piezoelectric airborne ultrasound transducers. Our investigations show the applicability of the thermo-acoustic devices for broadband and high pressure ultrasound emitters using pulse excitation.
The multiple-sample approach by means of centrifugal adhesion testing (CAT-technology) allows the determination of bonding strength of adhesive-bonded joints on a statistical basis of up to eight samples. Therefore, it is obvious to ensure the continuous handling and identical processing of an octet of samples within the entire process chain of wet-chemical cleaning, plasma-chemical pre-treatment, bonding of samples, and testing of bonding strength. Within the multiple-sample bonding set-up (MPKV-technology) a defined bonding pressure can be adjusted regardless the actual number of samples. A comparison of single- and multiple-sample approach is made for bonding strength of selected adhesives, double-sided adhesive tapes and different material combinations [stainless steel (V2A) vs. stainless steel, polyamide (PA), or polypropylene (PP)]. It is shown that both technologies improve reliability of results
Multiple-sample approach: reliable ranking and validated statistics of bonding and adhesive strength
(2014)
Bonding strength of adhesive-bonded joints and adhesive strength of coatings have been exclusively determined in
single-sample tests using a tensile testing machine. Necessarily, the single-sample approach was also applied to the
corresponding bonding procedure. As a consequence, reliability and reproducibility of results were restricted. By
applying the newly introduced centrifuge technology, the multiple-sample approach was realized for simultaneous
tensile testing of up to eight samples under identical conditions without any disturbing shear-force effects. In order to
introduce the multiple-sample approach into the bonding procedure, a hydraulic bonding set-up was developed which
enables identical bonding pressure also for slightly different heights of sample assemblies. Both sample approaches
were compared for various application examples: ranking of different classes of adhesives, validated statistics of
adhesive-bonded joints using one particular adhesive and effects of cleaning and plasma-treatment on the adhesive
strength of coatings. The investigated systems included glass, metals and polymer substrates, different adhesives,
metallic and dielectric coatings on polymers.
Zur Bewertung der Klebkraft von Klebebändern werden üblicherweise die Prüfungen zur Bestimmung des Schälwiderstandes (in N/25 mm) mit 90° bzw. 180° Abzugswinkel unter Verwendung einer Zugprüfmaschine (ZP) herangezogen, Für die hier gezeigten Beispiele wurde dabei eine V2A-Prüfplatte (Ra = 0,15 pm), ein Abzugswinkel von 90° und eine Abzugsgeschwindigkeit von 300 mm/min verwendet.
Alternativ wurde der Versuch unternommen, die Klebkraft von Klebebändern durch die Prüfung der Verbundfestigkeit (in N/mm2) mittels Zentrifugen-Technologie (ZT) zu bestimmen. Dazu wurden beidseitig klebende Klebeband-Pads einer Abmessung von (10x10) mm2 zunächst auf V2A-Stahlsubstrate aufgebracht und anschließend dann auf diese modulare Prüfstempel (Klebfläche aus V2A, 0=10 mm; Massekörper
aus Cu) aufgesetzt. In Abb. 1 sind Beispiele von Versagensformen, wie sie nach der Prüfung der Verbundfestigkeit mittels ZT auftreten können, dargestellt.
Multiple-sample approach: reliable ranking and validated statistics of bonding and adhesive strength
(2014)
Bonding strength of adhesive-bonded joints and adhesive strength of coatings have been exclusively determined in single-sample tests using a tensile testing machine. Necessarily, the single-sample approach was also applied to the corresponding bonding procedure. As a consequence, reliability and reproducibility of results were restricted. By applying the newly introduced centrifuge technology, the multiple-sample approach was realized for simultaneous tensile testing of up to eight samples under identical conditions without any disturbing shear-force effects. In order to introduce the multiple-sample approach into the bonding procedure, a hydraulic bonding set-up was developed which enables identical bonding pressure also for slightly different heights of sample assemblies. Both sample approaches were compared for various application examples: ranking of different classes of adhesives, validated statistics of adhesive-bonded joints using one particular adhesive and effects of cleaning and plasma-treatment on the adhesive strength of coatings. The investigated systems included glass, metals and polymer substrates, different adhesives, metallic and dielectric coatings on polymers.
Zinkschichten wurden mit den zerstörungsfreien Methoden Röntgenfluoreszenz (XRF), mechanischer Tastschnitt (MS), Röntgenbeugung (XRD) und instrumentierter Eindringprüfung (IIT) hinsichtlich der makroskopischen und mikroskopischen Schichteigenschaften untersucht. Die Rauheit der Zinkschichten hängt im Wesentlichen von der Substratoberfläche ab. Inhomogenen Schichtdickenverteilung treten bekanntermaßen am Rand von Beschichtungsgestellen auf. Die plasto-elastische Eigenschaften Härte, E-Modul und Kriechen sind bei unterschiedlichen Abscheidungen vergleich- und reproduzierbar. Diese makroskopischen Schichteigenschaften sind geprägt von der Mikrostruktur der Schicht, die eine Vorzugsorientierung der Kristallite in der Netzebene (110), die senkrecht zur Substratoberfläche steht, zeigt.
The future commercial prospects for adhesive tapes are very good and its application range is very broad. From every-day-use in office, packaging, maintenance, and quick repair in workshops, it ranges from handicraft work, medical purposes and cosmetics up to workmanship. The study describes a new multi-sample approach in adhesive tape testing from theoretical background, preparation of test specimen for tensile as well as shear testing, detailed measurement procedures up to analysis and result interpretation. Various types of single and double-sided pressure sensitive adhesive tapes supplied by different manufacturers were investigated and compared