Filtern
Erscheinungsjahr
- 2017 (6) (entfernen)
Dokumenttyp
Sprache
- Englisch (6)
Schlagworte
- Thermoresponsive polymers (4)
- 2,6-diaminopyridine (1)
- Core/Shell/Shell (1)
- Core/shell/shell (1)
- Cosolvency (1)
- Fluorescence materials (1)
- Sensors (1)
- Thermoresponsive polymres (1)
- UCST polymer (1)
- UCST-type copolymer (1)
Functional polymer based on 2,6-diaminopyridine with tunable UCST behaviour in water/alcohol mixture
(2017)
Thermoresponsive polymers are of great importance in numerous applications such as bioseparation, drug delivery, diagnostic and microfluidic applications.[1-2] Only a few thermoresponsive polymers have been reported that present an Upper Critical Solution Temperature (UCST), i.e. phase separate from solution upon cooling, in a relevant temperature range and “green” solvents such as water or ethanol.[3] Indeed, polymers with UCST behavior below 60°C in alcohol or water/alcohol mixtures are extremely promising for the preparation of “smart” materials for sensing.
In this work, two novel functional polymers of based on a 2,6-diaminopyridine motif were synthesized by free-radical polymerization. Their UCST-type transition temperature is tunable by varying either their concentration in solution or the type of solvent. Insights into this phenomenon are investigated using turbidimetry and temperature dependent dynamic light scattering.
Fluorescent nanoparticles that “light up”/”dim down” by applying external stimuli are of particular interest in the fields of sensing, diagnostics, photonics, protective coatings and microfluidics. The current challenge for these materials is to combine for instance fluorescence and its response to a stimulus such as temperature in a precise manner. Here we present such a system based on a core/shell/shell architecture consisting of a silica core with a fluorescent layer and a thermoresponsive shell.
The silica core nanoparticles were first coated with a fluorescent shell using surface initiated reversible addition-fragmentation chain transfer (RAFT) polymerization. The fluorescent nanoparticles were then completely engulfed by a switchable protective coating made of thermoresponsive poly(N-isopropylacrylamide). The fluorescence of the nanoparticles could be “switched on” at room temperature and “switched off” with increasing environmental temperature because of the presence of the thermoresponsive layer. Insights into this phenomenon will be given based on temperature dependent fluorescence measurements and dynamic light scattering.
An UCST-type copolymer of acrylamide (AAm) and acrylonitrile (AN) (poly(AAm-co-AN)) was prepared by reversible addition fragmentation chain transfer (RAFT) polymerization and its temperature-induced phase transition and aggregation behaviour studied by turbidimetry, static and dynamic light scattering, small angle neutron scattering (SANS) and cryo-transmission electron microscopy (cryo-TEM) measurements. The phase transition temperature was found to increase with increasing AN content in the copolymer, concentration of the solutions and copolymer chain length. A significant effect was observed onto the phase transition temperature by addition of different electrolytes into the copolymer solution. The copolymer chains were aggregated below the phase transition temperature and disaggregated above it. The size of the aggregates increases with increasing AN contents and concentration of the copolymer solutions below the phase transition temperature. The copolymer chains were expanded and weekly associated in solution above the phase transition temperature. A model is proposed to explain such association–aggregation behaviour of poly(AAm-co-AN) copolymers depending on AN contents and concentration of the copolymer solutions as a function of temperature.
2,6-Diaminopyridine based functional polymers poly N-(6-aminopyridin-2-yl)acrylamide) (PNAPAAm) and poly(N-(6-acetamidopyridin-2-yl)acrylamide) (PNAcAPAAm) were synthesized via free radical polymerization and in addition PNAcAPAAm was synthesized by reversible addition–fragmentation chain transfer (RAFT) polymerization for comparison. The obtained polymers displayed upper critical solution temperature (UCST)-type reversible thermoresponsiveness in water/alcohol mixtures. The UCST Phase transition behaviour of the obtained functional polymers was studied using temperature dependent turbidimetry, dynamic light scattering and 1H-NMR measurements. The phase transition temperature of the polymers was tunable by varying either the concentration of the polymer solution, the nature of the alcohol or the composition of the solvent mixture. The cloud Point temperature of PNAcAPAAm was found to decrease with increasing alcohol content (MeOH, EtOH and iPrOH) in water/alcohol mixtures.
Past a critical amount of EtOH or iPrOH in water, the cloud point temperature of PNAcAPAAm increased upon further addition of EtOH or iPrOH. Such functional polymers with tunable UCST behaviour can be applicable in drug delivery, sensing, personal care and microfluidic applications.
Temperature switches “on” and “off” nanoparticle fluorescence in a core/shell/shell architecture
(2017)
Fluorescent nanoparticles that light “on/off” by applying external stimuli are of particular interest in the fields of sensing, diagnostics, photonics, protective coatings and microfluidics. The current challenge for these materials is for instance to combine fluorescence and its response to a stimulus such as temperature in a precise manner. Here we present such a system based on a core/shell/shell architecture consisting of a silica core with a fluorescent layer and a thermoresponsive shell.
In this work the silica core nanoparticles were first coated with a fluorescent shell using surface initiated reversible addition-fragmentation chain transfer (RAFT) polymerization. The fluorescent nanoparticles were then completely engulfed by a switchable protective coating made of thermoresponsive poly(N-isopropylacrylamide). The fluorescence of the nanoparticles could be “switched on” at room temperature and “switched off” with increasing environmental temperature because of the presence of the thermoresponsive layer. Insights into this phenomenon will be given based on temperature dependent fluorescence measurements and dynamic light scattering.
A copolymer consisting of acrylamide (AAm) and acrylonitrile (AN) in aqueous solution was investigated using broadband dielectric spectroscopy at frequencies between 10⁻¹ Hz and 10⁶ Hz in the temperature range from 2 °C to 60 °C. This system shows an UCST phase behavior. The phase transition and aggregation behavior is monitored by both the temperature and frequency dependence of the complex conductivity σ*(f, T), where the AN fraction and the concentration of the solution were varied.
Additionally, the dielectric data are compared with the results obtained from dynamic light scattering measurements. The temperature dependence of the DC conductivity (σDC) of the copolymer solution is monitored and the phase transition temperature (PTT) of the poly(AAm-co-AN) copolymer is deduced from a change in the T-dependence of the DC conductivity. The change in σDC can be explained by decreased effective charge carrier mobility and a reduction of the effective charge number density at temperatures below the phase Transition temperature of the poly(AAm-co-AN) solution. A pronounced interfacial polarization effect on the frequency dependence of the real part of the conductivity (σ') is observed at temperatures below the phase Transition temperature. The charge carriers are blocked at the formed aggregates giving rise to this interfacial polarization. The dependence of the interfacial polarization on the acrylonitrile fraction in the copolymer and the concentration of the solution is studied in detail and conclusions concerning the internal structures of the copolymer aggregates are drawn.