Filtern
Erscheinungsjahr
Dokumenttyp
- Vortrag (51)
- Posterpräsentation (24)
- Beitrag zu einem Sammelband (23)
- Beitrag zu einem Tagungsband (17)
- Zeitschriftenartikel (12)
- Sonstiges (7)
- Buchkapitel (2)
- Forschungsbericht (2)
- Monografie (1)
Referierte Publikation
- nein (139) (entfernen)
Schlagworte
- Hydrogen (3)
- Sensors (3)
- Biochemical sensor system (2)
- Calibration (2)
- EXAFS (2)
- Electronic nose (2)
- Elektronische Nase (2)
- Fluorides (2)
- Hydrogen sensor (2)
- Hydrogen sensors (2)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (51)
Fluorides are well-known as wood preservatives. One of the limitations of fluoride-based wood preservatives is their high leachability. Alternative to current fluoride salts such as NaF used in wood protection are low water-soluble fluorides. However, impregnation of low water-soluble fluorides into wood poses a challenge. To address this challenge, low water-soluble fluorides like calcium fluoride (CaF2) and magnesium fluoride (MgF2) were synthesized as nanoparticles via the fluorolytic sol−gel synthesis and then impregnated into wood specimens. In this study, the toxicity of nano metal fluorides was assessed by termite mortality, mass loss and visual analysis of treated specimens after eight weeks of exposure to termites, Coptotermes formosanus. Nano metal fluorides with sol concentrations of 0.5 M and higher were found to be effective against termites resulting in 100% termite mortality and significantly inhibited termite feeding. Among the formulations tested, the least damage was found for specimens treated with combinations of CaF2 and MgF2 with an average mass loss less than 1% and visual rating of “1”. These results demonstrate the efficacy of low water-soluble nano metal fluorides to protect wood from termite attack.
The efficiency of gas sensor application for facilitating the safe use of hydrogen depends considerably on the sensor response to a change in hydrogen concentration. Therefore, the response time has been measured for five different-type commercially available hydrogen sensors. Experiments showed that all these sensors surpass the ISO 26142 standard; for the response times t90 values of 2 s to 16 s were estimated. Results can be fitted with an exponential or sigmoidal function. It can be demonstrated that the results on transient behaviour depend on both the operating parameters of sensors and Investigation methods, as well as on the experimental conditions: gas change rate and concentration jump.
Technische Richtlinien enthalten Empfehlungen sowie Anforderungen zum Stand der Technik zur Aufstellung von Bewertungskriterien und Behandlung wissenschaftlich-technischer Fragen. Sie fördern den Erfahrungsaustausch und Technologietransfer zwischen Entwicklern und Anwendern.
In unserem Beitrag stellen wir die Richtlinie VDI/VDE 3518 vor. Diese Richtlinienreihe definiert Begriffe, beschreibt den Aufbau und klassifiziert Multigassensoren (Blatt 1), befasst sich mit den Anforderungen für das Unterscheiden, Erkennen und mengenmäßige Bestimmen von Gemischen gasförmiger Stoffe und die Prüfung von Multigassensoren (Blatt 2) und gibt Anleitung für geruchsbezogene Messungen mit „Elektronischen Nasen“ (Blatt 3). Multigassensoren können als elektronische Nasen in Anlehnung an den biologischen Geruchssinn zur Wahrnehmung und Charakterisierung von Gerüchen eingesetzt werden. Die Spezifik von Multigassensoren besteht darin, dass durch die Wahl und Betriebsweise der Sensoren eine Vielzahl von geeigneten Messsignalen erzeugt werden, aus denen mit mathematischen Verfahren die für die Anwendung gewünschten Informationen extrahiert werden. Dazu ist ein Training der Messeinrichtung mit Proben bekannter Eigenschaften notwendig.
Diese Richtlinie soll Herstellern, Anbietern und Nutzern als ein Leitfaden Informationen und Erläuterungen für die korrekte und sichere Arbeit mit Multigassensoren liefern. Sie soll Prüflaboratorien und Anwendern helfen, bei der Beurteilung von Qualitätsmerkmalen einheitlich vorzugehen und dafür gemeinsame Randbedingungen anzugeben
Pollution through emission of toxic gases is an increasing problem for the environment. It affects similarly agricultural, industrial and urban areas. In future, environmental emissions in ambient air must be monitored at even lower concentrations as nowadays. One environmental relevant compound is ammonia and its conversion product ammonium that have strong negative impact on human health and ecosystems. Most ammonia measurements in ambient air are performed in the range below 1000 nmol·mol-1 and thus there is a need for reliable traceable ammonia gas standards and in addition in situ analytical procedures for monitoring (in ambient air to avoid that thresholds are exceeded). Therefore, the use of reference materials is necessary for development accompanying test or for calibration, e. g. of structure-integrated sensors and mobile multi-gas sensors.
The developed gas standard generator produces gas mixtures that comply with the metrological traceability for ammonia gas standards in the desired environmentally relevant measurement range. The method is based on the permeation of ammonia through a membrane at constant temperature and pressure. The resulting ammonia penetrant gas flow is then mixed with a carrier gas flow to generate a gas standard flow of known concentration. The dynamic rage is enlarged by using a two dilution steps. Depending on the permeation rate, generable molar fractions are possible in the range nmol·mol-1 to a few µmol·mol-1. We present the design of an ammonia gas standard generator and first results of the characterisation of its individual components supporting the uncertainty assessment according to GUM for stable gas concentrations in this range. The relative uncertainty of the generated ammonia gas standard is smaller than 4 % (k = 2).
Die Spurenfeuchte von technischen Gasen kann zuverlässig mit coulometrischen Feuchtesensoren bestimmt werden. Das Prinzip dieser Sensoren basiert auf der Absorption von Wasser in einer hygroskopischen Schicht und anschließenderelektrolytischer Zersetzung. Die Kalibrierung der Sensoren erfolgte mit einem Spurenfeuchtegenerator bei Frostpunkttemperaturen kleiner als -30 °C bzw. einem Volumenanteil kleiner als 376 µL·L-1. Die generierte Feuchte wurde zusätzlich zu den coulometrischen Sensoren mit einem Taupunktspiegelhygrometer, welches als Referenz diente, gemessen. Zwischen dem coulometrischen Sensorsignal und der gemessenen Referenzfeuchte wurde eine empirische nichtlinare Funktion gefunden. Die resultierende Kalibrierungsfunktion, die aus zwei Parametern besteht, wurde hinsichtlich ihrer Messunsicherheit bewertet.
Zusätzlich erfolgt die Überprüfung der Kalibrierparameter mittels einfaktorieller Varianzanalyse (ANOVA). Die ANOVA zeigte, dass eine gemittelte Funktion für die Feuchtigkeitbestimmung in Stickstoff, Helium und synthetischer Luft für mehrere Sensoren angewendet werden kann.
Mit coulmetrischen Sensoren ist es möglich, die Spurenfeuchte in technischen Gasen mit einer erweitereten Unsicherheit hinsichtlich der Frostpunkttemperatur kleiner als 2,1 K zu ermitteln.
The efficiency of gas sensor application for facilitating the safe use of hydrogen depends considerably on the sensor response to a change in hydrogen concentration. Therefore, the response time has been measured for five different-type commercially available hydrogen sensors. Experiments showed that all these sensors surpass the ISO 26142 standard; for the response times t90 values of 2 s to 16 s were estimated. Results can be fitted with an exponential or sigmoidal function. It can be demonstrated that the results on transient behaviour depend on both the operating parameters of sensors and investigation methods, as well as on the experimental conditions: gas change rate and concentration jump.
Sol-Gel wood preservation
(2017)
The sol–gel-based modification of wood introduces chemical substances into wood in order to improve its characteristics and impart new properties. It stabilizes dimensions of wood (timber) components, increases its strength and resistance to water, and reduces cracking. Many sol–gel-based impregnations aim to protect against wood rot and fire. In most cases, the treatments are performed with alkoxysilanes, polysiloxanes, colloidal silica, or organically modified silica. In addition further substances such as titania, copper, and boron compounds have been applied on different types of wood. The precursor solutions were introduced by immersion, painting, or spray coating of wood followed by a drying and heat treatment process. The structure of the impregnated wood was investigated by SEM, EDX, TEM, FT-IR, NMR, and XRD. Frequently, test procedures according to standards were applied in order to assess the improvement in properties. Investigations demonstrate that silica and titania impregnations change properties first of all with increasing the amount of absorbed inorganic material (WPG), which is determined by the concentration of precursors, amount and size of particles in the sol, and the impregnation method. Sol–gel impregnation can be considered as an environmentally friendly approach of wood preservation. Various improvements in wood properties can be achieved such as reduced water uptake and volume swelling, improved weather stability, resistance against biodegradation, and fire retardancy.
Die Messung der Gasfeuchte im Spurenbereich in unterschiedlichen technisch und medizinisch relevanten Gasen erfolgte mit Sensoren, die auf dem coulometrischen Messprinzip basieren. Die verwendeten planaren coulometrischen Sensoren wurden im Frostpunkttemperaturbereich von -70 °C bis -30 °C in synthetischer Luft, Wasserstoff, Stickstoff und Distickstoffmonoxid (Lachgas) untersucht. Als Referenz für die Messungen wurde ein Präzisionstaupunktspiegel-Hygrometer verwendet. Die Gasfeuchte kann mit Hilfe der Sensoren in allen untersuchten Gasen, aber mit geänderten Kalibrierfunktionen, mit einer erweiterten Unsicherheit von kleiner als 2,1 K bestimmt werden. Für die Messungen in unterschiedlichen Gasen muss also der Einfluss der Gasmatrix auf das Sensorsignal berücksichtigt werden. So ist zum Beispiel bei Messungen in befeuchtetem Wasserstoff, aufgrund von Rekombinationseffekten, ein signifikant geändertes Sensorsignal zu beobachten.
Hydrogen sensor deployment
(2017)
H2Sense - Cost-effective and reliable Hydrogen Sensors for Facilitating the Safe Use of Hydrogen
(2016)
The H2SENSE (Cost-effective and reliable hydrogen sensors for facilitating the safe use of hydrogen) project promoted hydrogen primarily, but not exclusively, for its use as an alternative fuel. It brought together different stakeholders including sensor manufacturers, end-users, certification bodies and independent evaluators to ensure the optimum use of low-cost and reliable hydrogen sensors.
Project partners analysed sensor performance in real-life applications in industrial environments and identified increased requirements for sensors and for regulations, codes and standards. H2SENSE also facilitated the safe use and implementation of hydrogen as an alternative fuel by ensuring the correct use of effective hydrogen detection devices.
European scientists worked together with colleagues from the National Renewable Energy Laboratory (NREL) in Colorado, USA. They pooled their knowledge of developments in hydrogen sensor technology as well as deployment and commercialisation strategies. These benefits will be continued through trans-Atlantic inter-laboratory sensor testing programmes in which EU and US laboratories perform complementary tests and exchange results.
This book is on sensors which are regularly deployed in technologies and processes related to hydrogen production, storage, distribution, and use. Not all types of sensors are equally suitable for specific hydrogen applications. The information in this book is intended to help the reader understand the basics of sensors, sensing technologies, sensor applications, and to provide guidelines for choosing the right sensors and the use of them correctly. Correct deployment of appropriate sensors demands knowledge of the sensing principle and of the physical or chemical quantities being measured. Because of the properties of hydrogen, the potential for its vastly increased use in a future low-carbon economy and possible hazards associated with its use, special attention is paid to hydrogen sensors. This book will not focus on the details of the hydrogen technologies nor on the many safety-related aspects of these technologies. Many books are already available on these topics. Instead the detection principle of hydrogen sensors and other sensor types used, in the dynamic and rapidly developing field of hydrogen technologies, are treated in detail in this book.
In the first chapter a brief overview is presented on basic hydrogen properties and particularly on those properties which are most relevant for safety and for sensing. To illustrate the extensive field of contemporary applications and the exciting possibilities for near future sensor applications, existing and emerging markets using large quantities of hydrogen are mentioned. The role of sensors as devices for monitoring and control of processes and as safety monitoring devices is outlined.
The second chapter gives an introduction to sensing technology and provides the Reader with relevant information pertaining to sensor definitions and classification, sensor metrics, and performance arameters, in addition to background information on sensor preparation technologies and techniques. While there are many books available which provide more exhaustive information on each of these topics, e.g., the level of detail provided in this chapter is sufficient to appreciate the salient features of sensing and sensing Technology which are central to hydrogen safety and monitoring of relevant applications.
Chapter 3 provides a comprehensive overview of emerging and commercially available hydrogen sensors, an explanation of their sensing principle, and important aspects of their performance. A comprehensive and up-to-date account of the theory (physical or chemical principles), design, and practical implementations of hydrogen sensors for use in hydrogen related applications is presented.
Similar information on chemical sensors for other gases, such as oxygen and trace components, which are also highly important in hydrogen technologies because of potential hazards to human health, process safety or facility performance, is provided in Chapter 4.
In Chapter 5 descriptions of physical sensors for temperature, pressure, gas flow, and fire indication, which are also germane for the safe use of hydrogen, are provided.
Standards, codes, and regulatory documents, which provide practical advice and legislative requirements regarding sensor deployment and performance, are described in Chapter 6. This chapter also makes reference to the main procedures for sensor testing in gas Standards including precise analytical methods and reference methods. The chapter concludes with a discussion on sensor selection and some installation guidelines are provided.
In Chapter 7 traditional and emerging processes and technologies involving hydrogen are described. The application of sensors in processes for the production of hydrogen, hydrogen storage, distribution, and the use of hydrogen in stationary and mobile fuel cells is discussed. Furthermore, the use of hydrogen as a coolant and chemical reagent (medium) in various processes is described. The exploitation of sensors for replacing traditional analytical instrumentation is also discussed. Finally supplementary information is provided on hydrogen properties, measuring quantities, and sensor parameters.
The chapter describes the application of electronic noses (multigas sensors) for the quality control of spices and spice mixtures. Electronic noses were successfully applied for headspace analysis of spices. It was demonstrated in many investigations that electronic noses can contribute to the characterization of spices and spice mixtures in order to distinguish spices and spice mixtures, differentiate by origin, growth seasons,and processing,indicate adulteration from original, detect mold infestation. Electronic noses can be used as a fast screening method to provide information about the product quality. However, it needs samples and methods for reference, careful training, and complex calibration to consider influencing and disturbing effects as well as the possible limitations of the instrumentation. The correlation to classical chemical analysis methods is always advisable. Machined olfaction methods are capable to support the sensory analysis; however, they cannot yet substitute them.
The use of hydrogen sensors can be categorized into three types
of application:
- Safety monitoring
- Leak detection
- Process control
When applied in one of these areas hydrogen sensors fulfill the
following tasks:
- Indicate a hazardous condition
- Provide warnings or alarms for out-of-limits conditions
- Monitor and control System Operation
- Provide performance data
Zum Projektkonsortium H2Sense haben sich zusammengeschlossen: die ESAM Bundesanstalt für Materialforschung und -prüfung als Koordinator, das Joint Research Center der Europäischen Kommission, das Zentrum für Sonnenenergie- und Wasserstoff-Forschung Baden-Württemberg sowie die Unternehmen AppliedSensor, Reutlingen, UST Umweltsensortechnik, Geschwenda und Sensitron, Cornaredo, Italien. Das Projekt wird finanziell unterstützt durch das Fuel Cell and Flydrogen Joint Undertaking (FCH JU), eine öffentlich-private Partnerschaft unter Beteiligung der Europäischen Kommission. Um den Austausch von Wissen, Erfahrungen und Know-how zu erweitern, arbeitet man erstmals bei einem FCFI-JU-geförderten Projekt auch mit dem amerikanischen National Renewable Energy Laboratory (NREL) zusammen.