Filtern
Dokumenttyp
- Zeitschriftenartikel (5)
- Beitrag zu einem Sammelband (1)
- Vortrag (1)
Sprache
- Englisch (7)
Schlagworte
- Programming (7) (entfernen)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (1)
Temperature-memory polymers are able to generate a substantial mechanical response when heated above the temperature, at which a preceding deformation was carried out. Here we show how to design the temperature-memory effect (TME) by thermomechanical treatment. As a model polymer, phase segregated poly(ester urethane) (PEU) containing crystallizable segments of poly(1,4-butylene adipate) (PBA) was used. For programming, strain elongation was applied at temperatures within the PBA melting transition area, before temperature holding, unloading and cooling were carried out. Upon heating under stress-free or constant strain recovery conditions, precisely set temperature-memory onsets could be witnessed. Most importantly, strain fixities and recoverabilities the same as maximum recovery stresses turned out to be controllable by strain rate and temperature holding time after deformation, while transition temperatures remained largely unaffected. The tailoring of thermoresponsiveness was structurally enabled by different PBA crystallinities in the programmed state as verified by wide-angle X-ray scattering (WAXS). The reported studies intend to design TMEs in semicrystalline polyurethanes according to user-defined needs to make this technology broadly applicable.
The selective compression of quick response (QR) and Data Matrix code carriers based on shape memory polymer (SMP) with a freely configurable steel ball type indenter and adjacent thermo-mechanical shape fixing gave notched, room temperature (23 °C) stable, temporary shapes with non-decipherable codes. The microscopic investigation of cryomicrotome sections unveiled indentation-related shape fixities of about 90 %. Independent of the selected two-dimensional code, the triggering of the SM effect resulted in sufficient shape recoveries to restore the code readability so that a maximum number of characters including 122 for a QR code (version 7) and 112 in case of a Data Matrix code (version 12) could be read with a scanning and decoding device. Due to the large number of difficult to copy shapes with on demand releasable information, SMPs may serve as viable information carriers for product and brand protection applications.
We demonstrate that phase-segregated poly(ester urethane) (PEU) with crystallizable switching segments of poly(1,4-butylene adipate) (PBA) excels as high-performance temperature-memory polymer. Temperature-memory effects (TMEs) with regard to strain and stress recovering could be programmed by polymer elongation at temperatures below or within the PBA melting transition, followed by cooling under constant stress below the PBA crystallization transition and unloading. Beyond that conventional approach, a novel TME programming route was designed, mostly consisting in specimen elongation and unloading at the same temperature. As a result, an enhanced control over the onsets of strain and stress recovering could be achieved. With these findings, the TME could be exploited to switch quick response (QR) codes in recently developed information carriers from unreadable to readable. We conjecture that such behavior can be programmed into virtually all semicrystalline elastomers and anticipate applicability as label technology to monitor temperature abuse of food and pharmaceuticals.
The main component of this program is a simultaneous representation of the unit cell and the calculated powder pattern. It allows the manipulation of the Crystal structure by moving selected atoms of the asymmetric unit. The resulting powder pattern can be directly compared to experimental data in order to obtain reliable starting values for further computations in refinement programs.
PowderCell 2.0 for Windows
(1998)
PowderCell contains a comfortable, user friendly visualization and modification tool for crystal structures. It provides on-line calculation of the corresponding powder diffraction patterns simulating a variety of experimental conditions. The common ICSD and Shelx file formats are supported for importing crystal structure information. It has control of automatic cell transformation and also derivation of subgroups. More than 740 different settings of the 230 space-group types are supported. Up to ten crystal structures can be considered simultaneously. A full pattern refinement enables the direct comparison with experimental diffractograms for quantitative phase analysis, lattice parameter refinement, polynomial background estimation, etc.
PowderCell as teaching tool
(1998)
PowderCell represents a user friendly program which supports the solution of scientific problems as well as teaching and education. Especially for the last one the program offers a lot of information regarding the space-group type as well as crystal structure used. Therefore, on some universities the program is used successfully to make students familiar with x-ray crystallography. The quasi-simultaneous diffraction pattern simulation visualized the changes caused by the respective crystal structure. However, it is also possible to vary different diffraction parameters and investigate the resulting changes in the interference intensity or the reflection position. In principle, the aim of the program is the intuitive generation of structure models. Therefore, special tools have been implemented to move (rotate or shift) or transform the crystal structure.