Filtern
Dokumenttyp
- Zeitschriftenartikel (3) (entfernen)
Sprache
- Englisch (3)
Referierte Publikation
- ja (3)
Schlagworte
- Cavitation (3) (entfernen)
Organisationseinheit der BAM
Film formation and capillary condensation of nitrogen at 78 K on the mesoporous controlled pore glass CPG-10-75 have been studied at certain relative pressures by in situ small-angle neutron scattering. On desorption ramified clusters of vapor filled voids have been observed, but not on adsorption. The kinetics of adsorption and desorption have been followed. The experimental results are discussed with respect to recent theoretical studies of fluids in complex pore systems.
Simulations of cavitation processes on a grain boundary under creep conditions have been carried out, taking into account nucleation, growth, coalescence and sintering of multiple cavities. Cavity growth rates have been calculated through a resolution procedure based on the use of holomorphic complex functions. Three dimensionless parameters have been identified that are responsible for the cavitation development. Parameter studies have been carried out in order to characterise the mechanisms that are responsible for the cavitation development. These studies have been used to develop a physically motivated, simplified model in order to describe the cavitation development of the simulations in terms of global state variables. The simplified model is able to reproduce the cavitation development for all considered combinations of the dimensionless parameters and allows the description of the thickening behaviour of a cavitating grain boundary.
High-density polyethylene becomes optically transparent during tensile drawing when previously saturated with diesel fuel. This unusual phenomenon is investigated as it might allow conclusions with respect to the material behavior. Microscopy, differential scanning calorimetry, density measurements are applied together with two scanning X-ray scattering techniques: wide angle X-ray scattering (WAXS) and X-ray refraction, able to extract the spatially resolved crystal orientation and internal surface, respectively. The sorbed diesel softens the material and significantly alters the yielding characteristics. Although the crystallinity among stretched regions is similar, a virgin reference sample exhibits strain whitening during stretching, while the diesel-saturated sample becomes transparent. The WAXS results reveal a pronounced fiber texture in the tensile direction in the stretched region and an isotropic orientation in the unstretched region. This texture implies the formation of fibrils in the stretched region, while spherulites remain intact in the unstretched parts of the specimens. X-ray refraction reveals a preferred orientation of internal surfaces along the tensile direction in the stretched region of virgin samples, while the sample stretched in the diesel-saturated state shows no internal surfaces at all. Besides from stretching saturated samples, optical transparency is also obtained from sorbing samples in diesel after stretching.