Filtern
Dokumenttyp
- Vortrag (17) (entfernen)
Referierte Publikation
- nein (17) (entfernen)
Schlagworte
- Computertomographie (17) (entfernen)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (17)
Applications of X-ray refraction to non-destructive characterization of ceramics and composites
(2013)
X-ray refraction is analogous to visible light deflection by matter, with two main differences: 1- convex objects cause divergence (i.e., the refraction index n is smaller than 1), and 2- deflection angles are very small, from a few seconds to a few minutes of arc (i.e., n is near to 1). Trivially but importantly, deflection of X-rays is also sensitive to the orientation of the object boundaries. These features make X-ray refraction techniques extremely suitable to a) detect defects such as pores and microcracks, and quantify their densities in bulk (light) materials, and b) evaluate porosity and particle properties such as orientation, size, and spatial distribution (by mapping). While X-ray refraction techniques cannot in general image single defects, their detectability is simply limited by the wavelength of the radiation.
We will thereby show the application of X-ray refraction 2D mapping (topography) and tomography to different sorts of problems in ceramic science and technology: 1) Sintering of SiC green bodies; 2) Porosity analysis in diesel particulate filter silicates; 3) fiber de-bonding in metal and polymer matrix composites; 4) micro-cracking of glass-precursor -eucryptite. We will see that the use of X-ray refraction analysis yields quantitative results, also directly usable in available models.
The combination of tomographic, microstructural data with other experimental techniques and with modeling is paramount, if we want to extract the maximum amount of information on material and component properties. In particular, quantitative image analysis, statistical approaches, direct discretization of tomographic reconstructions represent concrete possibilities to extend the power of the tomographic 3D representation to insights into the material and component performance. This logic thread holds equally for industrial and academic research, and valorizes expensive experiments such as those carried out at synchrotron sources, which cannot be daily repeated.
I will show a few examples of possible use of X-ray tomographic data for quantitative assessment of damage evolution and microstructural properties, as well as for non-destructive testing. Examples of micro-structured inhomogeneous materials will be given, such as Composites, Ceramics, Concrete, and Additively manufactured parts. I will also show how X-ray refraction computed tomography (CT) can be highly complementary to classic absorption CT, being sensitive to internal interfaces.
3D Charakterisierung wasserstoffunterstüzter Risse in Stahl mittels Synchrotron-Refraktions-CT
(2016)
Die Fehlertoleranz moderner hochfester Stähle gegenüber Prozessfehlern beim Fügen nimmt stetig ab und erfordert eine immer kritischere Beurteilung der Ergebnisse aus den vorhandenen Prüfverfahren. Deren Aussagekraft ist häufig zu gering und daher muss zum einen das wissenschaftliche Verständnis der Mikrokaltriss-Entstehung in diesen Stählen vertieft werden und zum anderen müssen die Prüfmethoden und Bewertungskriterien angepasst werden. Dies erfordert ein besseres Verständnis insbesondere der Kopplung von Eigenspannungen, Wasserstoffgehalten und der Wirkung äußerer Kräfte auf die Rissentstehung und das Risswachstum.
Erstmals soll mittels 3D-Synchrotron-Refraktions-Topographie an der BAMline am BESSY die Rissentstehung in mit Wasserstoff beladenen Zugproben charakterisiert werden. Diese Kenntnisse sollen in weiteren Untersuchungen auf Schweißnähte übertragen werden.
Since the advent of industrial computed tomography (CT), this new analysis method has been used also for the investigation of objects of cultural heritage and art. CT provides the possibility to determine the inner and outer surfaces and to investigate the material structure without causing damage to the valuable objects.
In this talk I will present examples of measurements performed at BAM, which demonstrate what CT can do for objects of diverse materials and for different objectives.
Ein kurzes Blick in die Computertomographie (CT) im Rahmen des RT3 Kurs der DGZfP ist gegeben.
Die Radontransformation ist bildlich erklärt, und die Grundlagen der Technik mit Vergleich zu der Radiographie sind auch erwähnt. Die typische Rekonstruktionsfehler und deren Beseitigung sind behandelt. Am Ende Beispiele der Anwendungen der CT sind gegeben, aus der zerstörungsfreie Prüfung, der Materialwissenschaft und der Metrologie.
The combination of tomographic, microstructural data with other experimental techniques and with modeling is paramount, if we want to extract the maximum amount of information on material and component properties. In particular, quantitative image analysis, statistical approaches, direct discretization of tomographic reconstructions represent concrete possibilities to extend the power of the tomographic 3D representation to insights into the material and component performance. This logic thread equally holds for industrial and academic research, and valorizes expensive experiments such as those carried out at synchrotron sources, which cannot be daily repeated.
I will show a few examples of possible use of X-ray tomographic data for quantitative assessment of damage evolution and microstructural properties, as well as for non-destructive testing. Examples of micro-structured inhomogeneous materials will be given, such as Composites, Ceramics, Concrete, and Additively manufactured parts. I will also show how X-ray refraction computed tomography (CT) can be highly complementary to classic absorption CT, being sensitive to internal interfaces.
Additionally, I will present a new technique in our portfolio, Neutron Diffraction, which is extremely well suited to the study of internal stresses, both residual and under external load.
Ein kurzes Blick in die Computertomographie (CT) im Rahmen des RT3 Kurs der DGZfP ist gegeben.
Die Radontransformation ist bildlich erklärt, und die Grundlagen der Technik mit Vergleich zu der Radiographie sind auch erwähnt. Die typische Rekonstruktionsfehler und deren Beseitigung sind behandelt. Am Ende Beispiele der Anwendungen der CT sind gegeben, aus der zerstörungsfreie Prüfung, der Materialwissenschaft und der Metrologie.
Die Schicht-für-Schicht additive Fertigung (AM) in Form des selektiven Laser- bzw. Elektronenstrahlschmelzens (SLM und EBM) bietet einerseits Vorteile bezüglich des Probendesigns, andererseits sind strukturelle Abweichungen von der nominellen Morphologie unvermeidbar. Beispielsweise führt das Abkühlen des fertigen Bauteils zu verringerten Abmessungen und angeschmolzene Pulverpartikel sorgen für unregelmäßige Oberflächen mit nicht vernachlässigbaren Rauigkeiten.
Im Fokus dieser Arbeit steht die computertomographische (CT) Untersuchung von IN625 Pulver und den daraus SLM-gefertigten Streben, Einheitszellen und Gitterstrukturen.
Mit Hilfe von Synchrotron – CT konnte das IN625 Pulver mit einer Voxelgröße von 0,5µm untersucht werden. Für die Untersuchung der daraus gefertigten verschiedenen Probengemetrien wurde Labor CT genutzt.
6 mm lange Streben variierten im Aufbauwinkel von 40° bis 90°. Der Unterschied zwischen Unter- und Oberseite während der Fertigung wird sowohl bei Porenverteilung als auch bei der Oberflächenrauigkeit deutlich. Ein Vergleich der Strebenabmessungen für die nominalen Durchmesser von 0,5 mm bis 3 mm zwischen CT and GOM zeigte keine signifikanten Differenzen.
Vier dieser Streben wurden zu einer bbc Einheitszelle zusammengefügt, welche sich wiederum zu den Gitterstrukturen ergänzen.
An einem Gitterwürfel (3x3x3 Einheitszellen) wurden In-Situ (Druck) CT bis 5kN durchgeführt. Mit einer Kraft von etwa 3kN erreichen wir den plastischen Bereich und beobachten zudem Strebenverzug.
Außerdem wurde ein Vergleich zu den CAD-Files wurde genutzt um einen möglichen Verzug während der Fertigung beurteilen zu können. Dafür wurden 4x4x4 cm³ Gitterstrukturen gebaut und evaluiert.
Mit diesen CT Messungen bestätigen wir eine signifikante Schrumpfung, die Bereits während der Fertigung berücksichtigt werden muss.
Quantitative image analysis, statistical approaches, direct discretization of tomographic reconstructions represent concrete possibilities to extend the power of the tomographic 3D representation to insights into the material and component performance. I will show a few examples of possible use of X-ray tomographic data for quantitative assessment of damage evolution and microstructural properties, as well as for non-destructive testing, with particular focus on additively manufactured materials. I will also show how X-ray refraction computed tomography (CT) and Neutron diffraction can be highly complementary to classic absorption CT, being sensitive to internal interfaces and residual stress analysis, respectively.