Filtern
Dokumenttyp
- Vortrag (3) (entfernen)
Referierte Publikation
- nein (3) (entfernen)
Schlagworte
- Alkali-silica reaction (3) (entfernen)
Organisationseinheit der BAM
- 7 Bauwerkssicherheit (1)
- 7.1 Baustoffe (1)
Eingeladener Vortrag
- nein (3)
Die schädigende Alkali-Kieselsäure-Reaktion (AKR) im Beton stellt in Teilbereichen nach wie vor ein Problem bei der Bewertung der Dauerhaftigkeit von Beton dar. Eine der häufigsten Fragestellungen ist immer noch eine schnelle und sichere Beurteilung der Alkaliempfindlichkeit von Gesteinskörnungen für die Betonherstellung. In der Präsentation wird gezeigt, welchen Beitrag die Gesteinskörnung zur AKR im Beton hat. Dabei wird die Alkaliempfindlichkeit von Gesteinskörnungen quantifiziert und die zu erwartende Schädigung des Betons durch die Gesteinskörnung detaillierter als bisher möglich klassifiziert. Im Vordergrund der Präsentation steht dabei das Verständnis der Auflösungsprozesse von Gesteinskörnungen in KOH-Lösungen (pH ≥ 13) bei unterschiedlichen Reaktionsbedingungen.
Anhand von Löseversuchen an den originalen Lieferkörnungen der Gesteinskörnungen bei 40 °C und mit 1,0 M KOH-Lösung ist es möglich, die Reaktivität der Gesteinskörnungen mit den ermittelten SiO2- und Al2O3-Konzentrationen der alkalischen Lösungen zu beschreiben. Durch eine erhöhte Temperatur von 80 °C und eine abgesenkte Konzentration der KOH-Lösung von 0,1 M können innerhalb von 56 Tagen vergleichbare Ergebnisse zu den Resultaten der Löseversuche bei 40 °C und 1,0 M KOH-Lösung erreicht werden.
In der alkalischen Lösung wird ein bestimmter Teil des gelösten SiO2 durch ebenfalls vorhandenes Al2O3 alumosilikatisch gebunden. Der verbleibende Teil des gelösten SiO2 steht für eine AKR zur Verfügung. Aus der zeitabhängigen Darstellung dieser SiO2-Konzentration wird die Lösegeschwindigkeit ermittelt. Dabei werden vier aufeinanderfolgende Phasen dem Dehnungs- und Rissbreitenverlauf der Probekörper des 40 °C-Betonversuchs zugeordnet. Zur Beurteilung der Alkaliempfindlichkeit einer Gesteinskörnung sind die Lösegeschwindigkeiten der letzten drei Phasen entscheidend.
Die Methode bietet eine Möglichkeit, die Alkaliempfindlichkeit einer Gesteinskörnung schnell, sicher und genauer als bisher zu bestimmen. Besonders vorteilhaft sind dabei die direkte Prüfung der Gesteinskörnung an der originalen Korngröße (Lieferkörnung), die zementunabhängige Prüfung, sowie die einfache experimentelle Durchführung und Auswertung.
The accelerated concrete prism test (ACPT-60 °C) facilitates testing of alkali-silica reactivity of aggregates within five months. Manual measurement is usually conducted to determine expansion of test specimen every 28 days. This conventional procedure gives only limited insight to expansion behaviour of ASR-affected prisms. Due to the large time intervals, expansion exceeding the critical value of 0.3 mm/m is likely to be noticed late. Continuous recording resolves this problem and delivers beneficial information on the shape of the expansion curve.
Displacement transducers integrated into a special testing equipment developed at BAM put continuous measurement into practice. Additionally, ultrasonic velocity and acoustic emissions are measured in-situ and provide deeper insights into hydration and crack formation processes during the test.
Aiming for an automated testing method close to the German guideline, the following technical and methodical challenges arise. Changing of the vertical orientation of the prisms with every manual measurement as standardised cannot be implemented. Furthermore, preliminary results already proved true that cooling and heating cycles, as necessarily associated with each manual measurement, can evoke additional expansion. Therefore, interrupted and continuously measured expansions reveal systematic differences, indicating the necessity to adjust the threshold expansion value for automated testing.
Results presented in the paper: Different types of reactive aggregate have been tested applying continuous and manual expansion measurement to the concrete specimens. Development of continuously measured ultrasonic velocity and acoustic emissions of the aggregates tested diverge significantly while the expansion curves vary in shape and maximum strain. Prisms produced from a slowly reacting aggregate do not exhibit noticeable crack formation. It shows that comprehensive measuring helps describing and distinguishing ASR-damage mechanisms.
Models of ASR-induced expansion, available in the open literature, so far are validated with discontinuous data hardly tracing the modelled curve. Continuous measurement improves validation and further model development.
Alkali silica reaction (ASR) is a major concrete durability problem resulting in significant maintenance and reconstruction costs for concrete infrastructures all over the world. To determine whether an aggregate is potentially reactive, accelerated concrete tests are used. Aim of this study is the chemical and microstructural characterization of ASR-products formed under the performance conditions of motorway pavements and during subsequent tests on the remaining ASR susceptibility. Samples were taken from concrete motorway pavements. Some of the samples already showed first indications for beginning damages whereas others showed deteriorations only after applying a performance testing procedure for the estimation of future risk of ASR damage. In a first step ASR-products were identified by polarized light microscopy in thin sections. The reaction products where then analyzed by Raman Spectroscopy and finally the chemical composition of the ASR-products was identified by SEM with EDX.
The results indicate that most reaction products show an increasing Ca/Si-ratio with progressive crack length. If an ASR-product develops inside an aggregate and moves through the cement paste, it has a high (Na+K)/Si-ratio at the beginning which decreases with increasing distance from its place of origin. The Raman spectra of the ASR-products are characterized by two broad bands indicating specific Q-species of different amorphous gel networks. Within the scope of the analysis distinctions in the microstructure and the chemical composition of the ASR-gels were detected relating to various conditions of accelerated testing.