Filtern
Dokumenttyp
- Vortrag (227)
- Zeitschriftenartikel (196)
- Posterpräsentation (87)
- Forschungsdatensatz (29)
- Sonstiges (16)
- Beitrag zu einem Sammelband (10)
- Beitrag zu einem Tagungsband (10)
- Forschungsbericht (7)
- Handbuch (4)
- Sammelband (Herausgeberschaft für den kompletten Band) (2)
Schlagworte
- Nanoparticles (132)
- XPS (97)
- Electron microscopy (57)
- SEM (52)
- VAMAS (39)
- HAXPES (34)
- Particle size distribution (32)
- X-ray photoelectron spectroscopy (32)
- ToF-SIMS (30)
- NAP-XPS (23)
- Standardisation (22)
- Nanomaterials (19)
- Thin films (18)
- Biofilms (17)
- EDS (17)
- Inter-laboratory comparison (17)
- NanoSolveIT (16)
- Reference materials (16)
- Graphene (15)
- Nanomaterial (15)
- Spectroscopic ellipsometry (15)
- Core-shell nanoparticles (14)
- EPMA (14)
- Ellipsometry (14)
- Traceability (14)
- Sample preparation (13)
- AFM (12)
- Interlaboratory comparison (12)
- SAXS (12)
- TiO2 (12)
- E. coli (11)
- EBSD (11)
- NEXAFS (11)
- Functionalized graphene (10)
- Reference material (10)
- Size (10)
- Standardization (10)
- Laser-induced periodic surface structures (LIPSS) (9)
- Metrology (9)
- Electron probe microanalysis (EPMA) (8)
- Imaging (8)
- Oxygen evolution reaction (8)
- Roughness (8)
- Base damage (7)
- Base loss (7)
- Boehmite (7)
- Core-shell particles (7)
- DNA (7)
- Geant4 (7)
- LEE (7)
- Polymers (7)
- ROS (7)
- Reactive oxygen species (7)
- SIMS (7)
- Surface chemistry (7)
- TOPAS (7)
- Titanium dioxide (7)
- Alginate (6)
- Core-shell (6)
- DNA radiation damage (6)
- Dissociative electron attachment (DEA) (6)
- Dosimetry (6)
- Electrochemistry (6)
- Fluorescence (6)
- Geant4-DNA (6)
- Hydrated DNA (6)
- Hydration shell (6)
- Hydrogen (6)
- Hydroxyl radical (6)
- ISO (6)
- Ionization (6)
- Low energy electrons (6)
- Luftgekoppelte Ultraschallprüfung (6)
- Microdosimetry (6)
- Nano (6)
- Nanocomposite (6)
- Nanotechnology (6)
- Near ambient pressure xray photo electron spectroscopy (6)
- OH radical (6)
- PES (6)
- Phased Array (6)
- Polydopamine (6)
- Prehydrated electron (6)
- Quantum dots (6)
- Radiation damage (6)
- Risk assessment (6)
- STXM (6)
- Shape (6)
- Single-strand break (SSB) (6)
- Surface chemical analysis (6)
- TOPAS-nbio (6)
- Test material (6)
- Titania nanoparticles (6)
- Titanium oxide (6)
- White light interference microscopy (6)
- X-ray spectroscopy (6)
- Xray photo electron spectrocopy (6)
- Bacteria (5)
- Data (5)
- Direct damage (5)
- Dissociative electron transfer (DET) (5)
- ESCA (5)
- Elemental composition (5)
- FIB (5)
- Fe-Ni (5)
- Hydrated electron (5)
- ISO/TC 202 (5)
- Image analysis (5)
- Image processing (5)
- Imaging ellipsometry (5)
- Indirect damage (5)
- Iridium oxide (5)
- Mesoporous iridium oxide films (5)
- Microbeam analysis (5)
- Micropatterning (5)
- Microplastic (5)
- Microplastics (5)
- NanoDefine (5)
- Net-ionization reaction (5)
- PS (5)
- PTFE (5)
- Quantification (5)
- Quasi-direct damage (5)
- Radiation therapy (5)
- Radical (5)
- Regulation (5)
- SEM/EDS (5)
- Si-Ge (5)
- SiO2 (5)
- Surface analysis (5)
- Surface functionalization (5)
- TEM (5)
- Thin film analysis (5)
- VSSA (5)
- X-ray Photoelectron Spectroscopy (5)
- X-ray Photoelectron Spectroscopy (XPS) (5)
- nPSize (5)
- AISI 304L (4)
- Advanced materials (4)
- Cancer treatment (4)
- Catalysis (4)
- Cycloalyphatic epoxy oligosiloxane (4)
- Deuterium (4)
- Double-strand break (DSB) (4)
- EC4SafeNano (4)
- Electron probe microanalysis (4)
- FeNi (4)
- Ferroelektret (4)
- ILC (4)
- ISO/TC 229 (4)
- Image segmentation (4)
- Imaging XPS (4)
- Ionic liquid (4)
- Knowledge Readiness Level (4)
- Microbeam Analysis (4)
- Multi-sample analysis (4)
- Nano@BAM (4)
- Nanoelectronics (4)
- Nanomaterial classification (4)
- Nanoparticle (4)
- Nanoparticle concentration (4)
- Non-destructive operando analysis (4)
- Oberflächenanalytik (4)
- Oberflächenmesstechnik (4)
- Oxidation (4)
- PCA (4)
- Particle size (4)
- Performance check (4)
- Protein (4)
- Quality assurance (4)
- Reproducibility (4)
- SEM/EDX (4)
- Scanning electron microscopy (4)
- SiGe (4)
- Single-stranded DNA-binding proteins (4)
- Standards (4)
- Synchrotron radiation (4)
- Thermoakustik (4)
- Thickness (4)
- Titania (4)
- Transmission function (4)
- Ultraschallwandler (4)
- Amperometry (3)
- Auger Electron Spectroscopy (3)
- Austenitic stainless steel (3)
- BAM reference data (3)
- CEN/TC 352 Nanotechnologies (3)
- Coating (3)
- Correlative imaging (3)
- Corrosion (3)
- DEA (3)
- DET (3)
- Data-fusion (3)
- EDX (3)
- Electro catalyst (3)
- Electrocatalysis (3)
- Energy deposit (3)
- Energy dispersive X-ray spectroscopy (3)
- Epoxy (3)
- European Centre (3)
- Femtosecond laser (3)
- Fluoride (3)
- G5P (3)
- Gold (3)
- Graphene oxide (3)
- HKUST-1 (3)
- Hard X-ray photoelectron spectroscopy (HAXPES) (3)
- Hard-energy X-ray photoelectron spectroscopy (3)
- Hybrid metrology (3)
- ISO/TC 229 Nanotechnologies (3)
- Immunoassay (3)
- Interlaboratory Comparisons (3)
- Iodine (3)
- Ionisation (3)
- Iridium oxide films (3)
- Iron oxide nanoparticles (3)
- Laser ablation in liquid (3)
- MCS (3)
- MamaLoCA (3)
- Mesoporous materials (3)
- Method (3)
- Microanalysis (3)
- Nanoparticle size distribution (3)
- Nanopartikel (3)
- Nanoplastics (3)
- Nanosafety (3)
- Non-spherical shape (3)
- OER (3)
- Particle (3)
- Particle scattering (3)
- Photocatalysis (3)
- Polymer 3R (3)
- Preparation (3)
- Presolvated electron (3)
- Quantum yield (3)
- Radiolysis (3)
- Radiotherapy (3)
- Reference data (3)
- Simulation (3)
- Spectroscopy (3)
- Stability (3)
- Stand der Normung (3)
- Steel (3)
- Surfaces (3)
- Synthesis (3)
- TED-GC/MS (3)
- Thin Films (3)
- Thin film metrology (3)
- Transmission Kikuchi Diffraction (TKD) (3)
- Transmission electron microscopy (3)
- Two-photon polymerisation (3)
- Uncertainties (3)
- X-ray spectrometer (3)
- XRF (3)
- Xray (3)
- Zirconium (3)
- µ-XRF (3)
- 2D Materials (2)
- 2D materials (2)
- 3D (2)
- 3D nano SIMS (2)
- ACEnano (2)
- AES (2)
- ATR-FTIR spectroscopy (2)
- Advanced Materials (2)
- Agarose (2)
- Aging (2)
- Anatase (2)
- Atomic force microscopy (2)
- Atomic layer deposition (2)
- Auger Electron Spectroscopy (AES) (2)
- Automated image analysis (2)
- Automatisation (2)
- Biosensors (2)
- Bisphenol A (2)
- Bundesoberbehörden (2)
- Cancer therapy (2)
- Case studies (2)
- Catalysts (2)
- Characterisation (2)
- Characterization (2)
- Chemical analysis (2)
- Chemical composition (2)
- Concentration (2)
- Convolutional neural networks (2)
- Copper (2)
- Correlative Imaging (2)
- Correlative analysis (2)
- Cylic Voltammetry (2)
- DSB (2)
- Decision support (2)
- Defects (2)
- Definition of nanomaterial (2)
- Depth profiling (2)
- Dry DNA (2)
- Duplex stainless steel (2)
- Dünne Schichten (2)
- EDS-TM002 (2)
- EMPIR (2)
- EU FP7 project NanoValid (2)
- Ectrocatalysis (2)
- Electron Microscopy (2)
- Electron Probe Microanalysis (2)
- Electron spectroscopy (2)
- Elektronenmikroskopie (2)
- Epitaxially grown 4H-SiC layers (2)
- Fe3O4 (2)
- FeNi-Oxide NPs (2)
- Ferrihydrite (2)
- Field of View (2)
- Film thickness (2)
- Fullerene (2)
- Graphene oxide flakes (2)
- Graphene powder (2)
- Graphene related 2D materials (2)
- Hard x-ray photoelectron spectroscopy (2)
- Hydrated electrons (2)
- Hydrothermal synthesis (2)
- ICP-OES (2)
- Inter-laboratory comparisons (2)
- Iridium-titanium mixed oxides (2)
- Iron oxide (2)
- LDX (2)
- Lanthanide (2)
- Lateral resolution (2)
- Layer-by-layer deposition (2)
- Lifetime (2)
- MOF (2)
- Machine learning (2)
- Mass spectrometry (2)
- Mesoporous thin films (2)
- Metal organic frameworks (2)
- Micro- and nanoplastics (2)
- Microprinting (2)
- Microscopy (2)
- Microstructure (2)
- Modelling (2)
- Molecular sieves (2)
- Multiphoton lithography (2)
- Mussel-inspired adhesives (2)
- Nano-safety (2)
- NanoSIMS (2)
- Nanomaterialien (2)
- Nanoparticle characterization (2)
- Nanorisk (2)
- Nanostructures (2)
- Neural networks (2)
- Non-classical crystallization theory (2)
- Oberflächenprüftechnik (2)
- Oberflächentechnik (2)
- Particle characterisation (2)
- Particle morphology (2)
- Particle number concentration (2)
- Particle shape (2)
- Particle size and shape distribution (2)
- Passive film (2)
- Phosphates (2)
- Photocuring (2)
- Photooxidation (2)
- Plasma (2)
- Polyethylene (2)
- Polyethylene Terephtalate (2)
- Polyethylene glycol (2)
- Polyglycerol (2)
- Porosity (2)
- Porous thin films (2)
- Pre-standardisation (2)
- Proteins (2)
- Quantum dot (2)
- Raman spectroscopy (2)
- Raman-spectroscopy (2)
- Reference Material (2)
- SOP (2)
- SSB (2)
- Safe-by-design (2)
- Secondary ion mass spectrometry (2)
- Shape-controlled (2)
- Silica nanoparticles (2)
- Size distribution (2)
- Small Area XPS (2)
- Small-angle X-ray scattering (2)
- Small-area XPS (2)
- Small-spot XPS (2)
- Spectroscopic Ellipsometry (2)
- Spectroscopic and imaging ellipsometry (2)
- Stainless steel (2)
- Stratagem (2)
- Surface Analysis (2)
- Surface analytics (2)
- Surface charge (2)
- Surface morphology (2)
- Surface science (2)
- TKD (2)
- Ti6Al4V alloy (2)
- Time-of-flight secondary ion mass spectrometry (ToF-SIMS) (2)
- Transition metals (2)
- Transparent Conductive Oxides (2)
- Tribology (2)
- Tungsten (2)
- Ultrafast laser processing (2)
- Ultrashort laser pulses (2)
- Upconversion (2)
- Virus inhibition (2)
- Water (2)
- X-ray production efficiency (2)
- X-rays (2)
- thin film analysis (2)
- (Quantitative) Structure-Active Relationships (1)
- (ter-)pyridineterminated self-assembled monolayer (1)
- 1-propyl-3-methyl-imidazolium bis(trifluoromethylsulfonyl)imide (1)
- 2D (1)
- 2D flakes (1)
- 2D nanomaterial (1)
- 3D image analysis (1)
- 3D printing (1)
- 4H–SiC (1)
- AEROSIL® OX50 (1)
- AI tool (1)
- Absorption spectrometry (1)
- Abwasser (1)
- Acidic oxygen evolution reaction (1)
- Adsorbed Layer (1)
- Advanced material (1)
- Advanced optics (1)
- AgInS (1)
- AgInS2 (1)
- Aged particles (1)
- Ageing (1)
- Al2O3 thin films (1)
- AlOOH (1)
- Alkali-silica reaction (1)
- Alloy 31 (1)
- Amorphous phases (1)
- Amphiphilicity (1)
- Analysis area measurements (1)
- Analytical methods (1)
- Analytical services (1)
- Anomalous Small Angle X-ray Scattering (1)
- Antibacterial (1)
- Antibacterial surface coatings (1)
- Antibiotic delivery (1)
- Antibiotic release (1)
- Antibiotics (1)
- Antifouling (1)
- Antifouling surface coatings (1)
- Antigen testing (1)
- Antimicrobial titanium coating (1)
- Antiviral activity (1)
- Aqueous synthesis (1)
- Argon gas cluster ion sputtering (1)
- Artefact (1)
- Article concentration (1)
- Artificial Intelligence (1)
- Artificial intelligence (1)
- Atmospheric conditions (1)
- Atomic Force Microscopy (1)
- Atomic fraction (1)
- Au Nanoparticles (1)
- Au-nanocubes (1)
- Auger electron spectroscopy (1)
- Auger-electron spectroscopy (AES) (1)
- Austenitic steel (1)
- Automated Image Analysis (1)
- Automation (1)
- B10 exposure (1)
- BADGER film (1)
- BET (1)
- BNP (1)
- BSA (1)
- Bacteria repellent surfaces (1)
- Bacterial adhesion tests (1)
- Bacterial attachment (1)
- Bacterial lipopolysaccharides (1)
- BadgerFilm (1)
- Batch analysis (1)
- Bead-based assay (1)
- Benchmarking (1)
- Bimodal (1)
- Bimodal size distribution (1)
- Binary zinc alloys (1)
- Bio sensing device (1)
- Bio-orthogonal chemistry (1)
- Bio-weathering (1)
- Biochip (1)
- Biofilm (1)
- Biofilmbildung (1)
- Biofuels (1)
- Biointerfaces (1)
- Biomaterials (1)
- Biomimicry (1)
- Biopolymers (1)
- Bipyramid (1)
- Bismuth titanates (1)
- Black fungi (1)
- Black phosphorus (1)
- Boehmite nanoparticles (1)
- Bone (1)
- Boronic acid (1)
- Boronic acid-functionalized 2D MoS2 (1)
- Bovine serum albumin (1)
- Brunauer-Emmett-Teller (1)
- Bulk metallic glasses (1)
- C7H15N2O4P (1)
- CCQM (Consultative Committee for Amount of Substance) (1)
- CEN (1)
- CEO (1)
- CIGS (1)
- CO2 (1)
- CUSP (1)
- Calcium monofluoride (1)
- Calcium silicate hydrate (1)
- Calibration (1)
- Cancer (1)
- Cancer therapy (1)
- Carbon Nanotubes (1)
- Carbon dioxide (1)
- Carbon nanoparticles (1)
- Carbon nanotubes (1)
- Carbon storage (1)
- Catalogue of Services (CoS) (1)
- Catalogue of services (1)
- Categorisation scheme (1)
- Cationic photocuring (1)
- Ce0.1Zr0.9O2 nanoparticles (1)
- Ce0.25Zr0.75O2 nanoparticles (1)
- Ce0.5Zr0.5O2 nanoparticles (1)
- Ce0.75Zr0.25O2 nanoparticles (1)
- Ce0.9Zr0.1O2 (1)
- CeO2 nanoparticles (1)
- CeO2/Co3O4 (1)
- Cell sheet fabrication (1)
- Cell-envelope (1)
- Cement hydration (1)
- Ceramic (1)
- Cerium oxide (1)
- Certified Referencematerial (1)
- Certified reference materials (1)
- Certified reference nanomaterials (1)
- Change in tensile properties (1)
- Characterization method (1)
- Characterization methods (1)
- Charge (1)
- Chemical analyses (1)
- Chemistry (1)
- Chemometric analysis (1)
- Chemotherapy (1)
- Classification (1)
- Cleaning (1)
- Click chemistry (1)
- Co0.75Fe2.25O4 nanoparticles (1)
- Co1.5Fe1.5O4 nanoparticles (1)
- Co2.25Fe0.75O4 nanoparticles (1)
- Co3O4 nanoparticles (1)
- Coatings (1)
- Coherent Fourier scatterometry (1)
- Comparability (1)
- Comparability of Measurement Results (1)
- Comparison (1)
- Complementary methodology and metrology (1)
- Complementary methods (1)
- Complex-shape (1)
- Composites (1)
- Composition (1)
- Compound semiconductors (1)
- Computed tomography (1)
- Conditioning films (1)
- Controlled morphology (1)
- Controlled periodic illumination (1)
- Controlled-shape (1)
- Copper alloy (1)
- Coprecipitation (1)
- Core-Shell (1)
- Core-shell nanoparticle (1)
- Core-shell nanoparticle (CSNP) (1)
- Core-shell structures (1)
- Core/shell nanoparticle (1)
- Core–shell particles (1)
- Core−shell particles (1)
- Correlative Spectroscopy (1)
- Correlative ex-situ ellipsometric analysis (1)
- Corrosion testing (1)
- Covalend functionalization (1)
- Covalent functionalization (1)
- Covalent interactions (1)
- Cross-sectioning (1)
- Crosslinking density (1)
- Cryo XPS (1)
- Cryo milling (1)
- CuNPs (1)
- CuO nanoparticles (1)
- Cubical Iron Oxide (1)
- Cubical shape (1)
- Curing (1)
- Cyclic voltammetry (1)
- Cycloaliphatic epoxy oligosiloxane (1)
- Cyclometalated iridium (III) complexes (1)
- Cytotoxicity (1)
- DFT (1)
- DSC (1)
- DSM 5009 (1)
- DSS (1)
- Damage (1)
- Data Management (1)
- Data correlation (1)
- Data fusion (1)
- Data readiness level (1)
- Defect Analysis (1)
- Definition (1)
- Dendritic polyglycerol (1)
- Depth Profiles and Images (1)
- Depth information (1)
- Depth-profiling (1)
- Dielectric Spectroscopy (1)
- Diffraction (1)
- Diffusion/diffusivity (1)
- Dispersion of nano materials (1)
- Dodecanethiol (1)
- Doping (1)
- Double-strand break (1)
- Drywood termite (1)
- Duplex stainless steels (1)
- Dynamic behavior (1)
- EC definition (1)
- EC definition of a nanomaterial (1)
- EC definition of nanomaterial (1)
- EC nanomaterial definition (1)
- EDS Spectrometer Test (1)
- EDS X-ray spectrometer (1)
- EDS performance check (1)
- EDS-TM001 (1)
- EMPIR nPSize (1)
- EPMA (Electron Probe Microanalysis) (1)
- ER-XPS (1)
- ESCA/XPS (1)
- ESMA (1)
- ESR (1)
- EU (1)
- EU definition (1)
- EU definition of nanomaterial (1)
- EU-Definition (1)
- Electrical Paramters (1)
- Electrical Properties (1)
- Electrical properties (1)
- Electrical thin layers (1)
- Electro catalytic water splitting (1)
- Electrocatalytic Water Splitting (1)
- Electrochemical Degradation (1)
- Electrochemical catalysts (1)
- Electrochemical immunosensor (1)
- Electrochemical sensing (1)
- Electrolysis (1)
- Electron Probe Microanalysis (EPMA) (1)
- Electron probe X-ray microanalysis (EPMA) (1)
- Electron probe microanallysis (EPMA) (1)
- Electrospray (1)
- Electrospray deposition (1)
- Electrospun nanocomposite fiber (1)
- Elementzusammensetzung (1)
- Ellipsometric operando investigation (1)
- Ellipsometric porosimetry (1)
- Ellipsometrie (1)
- Endocrine disruptor (1)
- Energy dependent XPS (1)
- Energy materials (1)
- Epoxy conversion degree (1)
- Epoxy nanocomposites (1)
- Escherichia coli (1)
- Estrogenic activity of plastic nanoparticles (1)
- Expert system (1)
- Extracellular polymeric substances (1)
- F- doping (1)
- FAIRification (1)
- FKM polymer (1)
- FTIR (1)
- Fast Fourier Transform (1)
- Fe-Ni oxides (1)
- Fe2O3 nanoparticles (1)
- FeNi nanoparticles (1)
- FeNi thin film (1)
- Femtosecond (1)
- Fenton (1)
- Ferroelectricity/ferroelectric materials (1)
- Few-layered titanium carbide nanosheets (1)
- Field of Analysis (1)
- Field of view (1)
- Flow cytometry (1)
- Fluorescence correction (1)
- Fluorouracil (1)
- Foaming (1)
- Form factor (1)
- Formaldehyde (1)
- Forschungsstrategie (1)
- Forsterite (1)
- Fourier transform infrared spectroscopy (1)
- Fourier-Transform Infrared Spectroscopy (1)
- Framework (1)
- Fullerene-Polyglycerol Sulfates (1)
- Functionalized nanographene (1)
- Fungus (1)
- GVP (1)
- Galvanotechnik (1)
- Gel electrolytes (1)
- General Materials Science (1)
- Genotoxic and oxidative damage (1)
- Glass powder (1)
- Glass-ceramic (1)
- Glycan microarray (1)
- Goethite (1)
- Governance (1)
- Graphen Oxide (1)
- Graphene funcionalisation (1)
- Graphene functionalisation (1)
- Graphene functionalization (1)
- Graphene related materials (1)
- Graphene related two-dimensional materials (GR2M) (1)
- Graphene template (1)
- Graphene-based polyglycerol sulfates (1)
- Graphene–bacteria interaction (1)
- Graphhene (1)
- Graphite furnace (1)
- Grating method (1)
- Green rust (1)
- Grouping (1)
- H-terminated Si3N4 films (1)
- HR-CS-MAS (1)
- Hard X-ray photoelectron spectroscopy (1)
- Hazard assessment (1)
- Hematite (1)
- Heterogeneous catalysis (1)
- Hierarchical micro-nanostructures (1)
- High entropy alloy (1)
- High pressure (1)
- High temperature corrosion (1)
- High-resolution transmission electron microscopy (1)
- High-throughput screening (1)
- Homogeneity (1)
- Homogeneous deposition (1)
- Human umbilical cell adhesion (1)
- Hybrid metrology measurement (1)
- Hydrogen Generation (1)
- Hydrogen assisted cracking (1)
- Hydrogen economy (1)
- Hydrogen evolution reaction (1)
- Hydrogen generation (1)
- Hydrogen photoproduction (1)
- Hydrogenated nanostructures (1)
- Hyperbranched (1)
- Hyperspectral imaging (1)
- ILC on detection methods (1)
- IR spectroscopy (1)
- IR spectroscopy; conductometry (1)
- ISO 21363 (1)
- ISO 23173 (1)
- ISO/TC 201 (1)
- ISO/TC 202 Microbeam Analysis (1)
- ISO/TC229 (1)
- ISOGScope (1)
- Identification (1)
- Iinter-laboratory comparison (1)
- Iionic liquid (1)
- Image Segmentation (1)
- Imaging AES (1)
- Imaging Ellipsometry (1)
- Imaging SIMS (1)
- Imaging surface chemical analysis (1)
- Imaging techniques (1)
- In situ (1)
- In-situ SAXS/WAXS (1)
- Indenter area function (1)
- Indium (1)
- Indium Tin Oxide (1)
- Inelastic background (1)
- Influenza A virus (1)
- Infrared nano AFM (1)
- Instrument compliance (1)
- Intensity scale calibration (1)
- Inter-lab comparison (1)
- Inter-laborator comparison (1)
- Interaction with atmospheres (1)
- Interlaboratory Comparison (1)
- Interlaboratory comparisons (1)
- Intermediate phases (1)
- Intermodulation (1)
- Intermodulation AFM (1)
- International Meter Convention (1)
- Interphase (1)
- Intrinsic OER activity (1)
- Iron (1)
- Iron nanophases (1)
- K-rich Birnessite (K0.45MnO2) (1)
- Katalysator (1)
- Knock-out mutant (1)
- Knowledge (1)
- Korrosion (1)
- Korrosionsüberwachung (1)
- Kraft Lignin (1)
- LEVASIL 50/50 (1)
- LIPSS (1)
- Label-free detection (1)
- Laboratory experiments (1)
- Lanthanide(III) (1)
- Laser processing (1)
- Laser-induced amorphization (1)
- Laser-induced pariodic surface structures (1)
- Laser-induced periodic surface structures (1)
- Laser-induced periodic surface structures, LIPSS (1)
- Layer Materials (1)
- Lead-free ceramics (1)
- Lifetime analysis (1)
- Ligand exchange (1)
- Light elements (1)
- Linear polyglycerol (1)
- Lipids (1)
- Lonic liquid (1)
- Low-density polyethylene (1)
- Low-density polyethylene (LDPE) (1)
- Luminescent lifetime (1)
- Luminescent materials (1)
- MALDI (1)
- MIC (1)
- MXenes (1)
- Magic-sized cluster (1)
- Magnetic nanocatalyst (1)
- Magnetpartikel (1)
- Magnetron Sputtering (1)
- MamaLoCa (1)
- Marble sculptures (1)
- Martensite (1)
- Martin Seah (1)
- Mass spectrometry imaging (1)
- Material defects (1)
- Me-TiO2 (1)
- Measurement uncertainty (1)
- Mechanical properties (1)
- Mechanical stress (1)
- Mechanochemical oxidation (1)
- Mechanochemistry (1)
- Medium entropy alloy (1)
- Melanin Adhesion (1)
- Mesoporosity (1)
- Mesoporous (1)
- Mesoporous Materials (1)
- Mesoporous films (1)
- Mesoporous iridium oxides films (1)
- Mesoporous iridium-titanium mixed oxides (1)
- Mesoporous mixed metal oxide films (1)
- Mesoporous oxide materials (1)
- Mesoporous oxides (1)
- Messtechnik (1)
- Metal fluorides (1)
- Metal-organic frameworks (1)
- Metal-organic-frameworks (1)
- Metal-semiconductor (1)
- Metallschichten (1)
- Methane (1)
- Methane removal (1)
- Methane total oxidation (1)
- Method development (1)
- Method validation (1)
- Metrology in Chemistry and Biology (1)
- Micro- and Nanoplastics (1)
- Microarray printing (1)
- Microbeads (1)
- Microbially influenced corrosion (MIC) (1)
- Microdroplet (1)
- Microplastic reference materials (1)
- Microplastics detection (1)
- Microplastics standardisation (1)
- Microwave-assisted synthesis (1)
- Milling (1)
- Mineral tranformation (1)
- Miscible polymer films (1)
- Mixed metal oxide (1)
- Molybdenum (1)
- Morpho-chemical characterization (1)
- Morphogenesis (1)
- Morphology (1)
- Multi-method analysis (1)
- Multi-resistant bacteria (1)
- Multilayers (1)
- Multiplex (1)
- Multivalency (1)
- Mussel-inspired coating (1)
- Mussel-inspired dendritic polyglycerol (MI-dPG) (1)
- Mutual calibration (1)
- Mycotoxins (1)
- Nano CRM (1)
- Nano Characterisation (1)
- Nano characterization (1)
- Nano graphene (1)
- Nano particle (1)
- Nano screening (1)
- Nano structure (1)
- Nano-Charakterisierung (1)
- Nano-Kompetenzzentrum (1)
- Nano-Projekte (1)
- Nano-characterisation (1)
- Nano-object (1)
- Nano-powder characterization (1)
- Nano-related data (1)
- Nano-risk assessment (1)
- NanoValid (1)
- Nanoanalysis (1)
- Nanoanalytics (1)
- Nanoanalytik (1)
- Nanobiointerfaces (1)
- Nanocarrier (1)
- Nanocomposites (1)
- Nanocrystals (1)
- Nanocubes (1)
- Nanodefine (1)
- Nanoindentation (1)
- Nanoinformatics (1)
- Nanomaterial Properties (1)
- Nanomaterial analysis (1)
- Nanomaterial categorisation (1)
- Nanomaterial definition (1)
- Nanomaterial legislation (1)
- Nanomaterial properties (1)
- Nanomaterial regulation (1)
- Nanomaterial screening (1)
- Nanomechanical charecteisation (1)
- Nanomechanical properties (1)
- Nanometrology (1)
- Nanoparticle Characterization (1)
- Nanoparticle size (1)
- Nanoparticle size measurement (1)
- Nanoparticle structure (1)
- Nanoparticular TiO2 (Anatase) (1)
- Nanoplastic (1)
- Nanoplatform (1)
- Nanoplattform (1)
- Nanopowder (1)
- Nanorisk Governance (1)
- Nanosafety services (1)
- Nanoscale (1)
- Nanoscale measurements (1)
- Nanosheets (1)
- Nanostructured FeOx films (1)
- Nanostructured material (1)
- Nanotechnologie (1)
- Nanotechnologies (1)
- Nano‐object characterization (1)
- Narrow line method (1)
- Native oxide layer (1)
- Near ambient pressure XPS (1)
- Near ambient x-ray photoelectron spectroscopy (1)
- Near edge X-ray absorption fine structure (1)
- Near-ambient pressure (1)
- Near-ambient pressure X-ray photoelectron spectroscopy (1)
- Neuartige Materialien (1)
- Neural Networks (1)
- Nitrene [2+1] cycloaddition (1)
- Nitrene[2+1]cycloaddition (1)
- Nm film thickness (1)
- NoStep Standards (1)
- Nobel-metal free electrocatalysis (1)
- Noise in image (1)
- Non-destructive ambient analysis (1)
- Non-spherical (1)
- OECD (1)
- OECD TG 125 (1)
- Ochratoxin A (1)
- Olivine (1)
- One-pot synthesis (1)
- Operando (1)
- Optical analysis (1)
- Optical assay (1)
- Optical constants (1)
- Optical measurement technology (1)
- Optical measurements (1)
- Optical porosimetry (1)
- Optical spectroscopy (1)
- Optically active surfaces (1)
- Organic phosphates (1)
- Orientation (1)
- Osteogenesis (1)
- Osteoporosis (1)
- Oxygen Evolution Reaction (1)
- Oxygen evolution reaction (OER) (1)
- P. Fluorescens (1)
- P25 (1)
- PC characterisation (1)
- Participatory Approach (1)
- Particle Characterization (1)
- Particle architecture (1)
- Particle characterization (1)
- Partikelgrößenverteilung (1)
- Passivation (1)
- Pelletization (1)
- Perfluorooctanoic Acid (PFOA) (1)
- Phase analysis (1)
- Photodegradation (1)
- Photoelectrochemistry (1)
- Photoemission (1)
- Photoluminescence (1)
- Photophysics (1)
- Photoreforming (1)
- Photoswitchable monolayers (1)
- Physicochemical characterization (1)
- Pigments (1)
- Plasma deposition (1)
- Plastic reference materials (1)
- Platinum (1)
- Polarimetry (1)
- Polycarbonate (1)
- Polyethylene glycol (PEG)-grafting antifouling surface (1)
- Polymer (1)
- Polymer foils (1)
- Polymerization (1)
- Polypropylene (1)
- Polystyrene microparticles (1)
- Porous layers (1)
- Porous materials (1)
- Post-modification by L-cysteine (1)
- Powder (1)
- Powder X-ray diffraction (1)
- Power Electronics (1)
- Power electronics (1)
- Pphosphates (1)
- Predictive modelling (1)
- Principal Component Analysis (1)
- Principal component analysis (PCA) (1)
- Prodrug antibiotic (1)
- Protein structure (1)
- Provenance information (1)
- Pseudomonas aeruginosa (1)
- Pseudomonas fluorescens (1)
- Py-GC/MS (1)
- QUASES (1)
- Quality control (1)
- Qualitätssicherung (1)
- Quantitative XPS (1)
- Quantitative surface chemical analysis (1)
- Quartzite rock (1)
- REM (1)
- REM/EDX (1)
- Rainfall simulator (1)
- Raman (1)
- Real-time infrared spectroscopy (1)
- Reference Nanomaterials (1)
- Reference nanomaterials (1)
- Reference nanoparticles (1)
- Reference procedures (1)
- Reference products (1)
- Reference spectra (1)
- Reference standards (1)
- Referenzdaten (1)
- Regional workshop (1)
- Regulatory identification of nanomaterials (1)
- Regulatory risk assesment (1)
- Release kinetics (1)
- Reliabiilty (1)
- Reliability (1)
- Reliable characterization (1)
- Repelling surface coatings (1)
- Reproducibility crisis (1)
- Reproducible Spectra (1)
- Resolution criterion (1)
- Risk Governance (1)
- Risk asessment (1)
- Rotaxanes (1)
- Runoff (1)
- SAM (1)
- SARS-CoV 2 (1)
- SARS-CoV-2 nucleocapsid protein (1)
- SARS-CoV2 inhibitor (1)
- SEC (1)
- SEM micrography (1)
- SEM tilting (1)
- SEM/EDS/STRATAGem (1)
- SKPFM (1)
- STEM-in-SEM (1)
- STEM-in-SEM (TSEM) (1)
- Sabatier (1)
- Sample peparation (1)
- Scannig probe microscope (1)
- Scanning Auger Spectroscopy (1)
- Scanning Electron Microscopy (1)
- Scanning Probe Microscopy (1)
- Scanning Probe methods (1)
- Scanning probe measurements (1)
- Scanning probe microscopy (1)
- Scanning transmission X-ray microscopy (STXM) (1)
- Scattering (1)
- Sealing materials (1)
- Secondary Ion Mass Spectrometry (1)
- Secondary fluorescence (1)
- Secondary fluorescence correction (1)
- Selected Area XPS (1)
- Selected area XPS (1)
- Self-assembled monolayers (1)
- Self-degrading (1)
- Semiconductor (1)
- Semiconductor nanocrystals (1)
- Sensing (1)
- Shape control (1)
- Shape-controlled nanoparticles (1)
- Shape-engineered (1)
- Shell (1)
- Sialic acid (1)
- Siderite (1)
- Silica (1)
- Silicon carbide (1)
- Silver (1)
- Silver nanoparticles (1)
- Single particle (1)
- Single-source-precursor (1)
- Single-strand break (1)
- Singulettsauerstoff (1)
- Sintering (1)
- Size and size distribution (1)
- Size measurement (1)
- Size measurements (1)
- Small Spot XPS (1)
- Small angle x-ray scattering (1)
- Small-Angle X-ray Scattering (1)
- Soft X-ray (1)
- Soft-templated mesoporous films (1)
- Software (1)
- Software UNIFIT 2022 (1)
- Sol-gel synthesis (1)
- Solar Cell (1)
- Solar cells (1)
- Solar concentrator (1)
- Solar energy (1)
- Solarpur (1)
- Sonochemical synthesis (1)
- Specific Surface Area (BET) (1)
- Spectrometer check (1)
- Spectroscopic ellipsometry (SE) (1)
- Spectroscopic imaging ellipsometry (1)
- Spectroscopy / Instrumentation (1)
- Spectroscopy / Theory (1)
- Spectrum imaging (1)
- Spektroskopie (1)
- Stabilization (1)
- Stakeholder (1)
- Standard Operation Procedures (1)
- Standard operation procedures (1)
- Standardarbeitsanweisung (1)
- Standardisierung (1)
- Standardized check (1)
- Straight edge method (1)
- Streptavidin binding (1)
- Strontium titanate (1)
- Structural characterisation (1)
- Structure activity relationships (1)
- Structure-properties relationships (1)
- Struvite (1)
- Sulfated materials (1)
- Sulphidation (1)
- Surface (1)
- Surface Analysis Working Group (1)
- Surface Analytics (1)
- Surface Chemical Transformation (1)
- Surface Chemistry (1)
- Surface analyses (1)
- Surface analysis, (1)
- Surface analytic (1)
- Surface characterization (1)
- Surface chemical analysis of biofilms (1)
- Surface chemisttry (1)
- Surface morphology and chemistry (1)
- Surface plasmon resonance (1)
- Surface regeneration (1)
- Surface-initated grafting (1)
- Sustainability (1)
- Swell-capture (1)
- Synchrotron (1)
- Synchrotron-XPS (1)
- T-SEM (1)
- TGA (1)
- TMB (1)
- TRL (1)
- TSEM (1)
- Ternary zinc alloys (1)
- Themal Transitions (1)
- Thermal annealing (1)
- Thermoplastics (1)
- Thermoresponsive poly(glycidyl ether) coatings (1)
- Thermosets (1)
- Thickness measurements (1)
- Thin Layers (1)
- Thin Polymer Layers (1)
- Thin mesoporous films (1)
- Thiols (1)
- Threshold (1)
- Thumor therapy (1)
- Ti-6Al-4V alloy (1)
- TiO2 D540 nanoparticles (1)
- TiO2 PVP (1)
- TiO2 nanoparticle (1)
- TiO2 nanoparticles (1)
- Tilting (1)
- Time of Flight - Secondary ion mass spectrometry (1)
- Time-of-Flight Secondary Ion Mass Spectrometry (1)
- Time-of-Flight secondary ion mass spectrometry (1)
- Time-of-flight secondary ion mass spectrometry (1)
- Time-offlight secondary ion mass spectrometry (ToF-SIMS) (1)
- Titanium (1)
- Titanium Carbide Nanosheets (1)
- Titanium Dioxide (1)
- Titanium alloy (1)
- ToF SIMS (1)
- Tools (1)
- TopasMC (1)
- Toxicology (1)
- Traceable nanoparticle size measurements; (1)
- Traceable size (1)
- Transition metal (1)
- Transmission electron microsocpy (1)
- Transmission function IERF (1)
- Transparent conductive Oxides (1)
- Trends (1)
- Triazine (1)
- Two-dimensional hexagonal boron nitride(h-BN) (1)
- UV Weathering (1)
- UV-curing (1)
- Ultra thin polymer films (1)
- Ultrashort laser processing (1)
- Uncertainty budget (1)
- VMAAS (1)
- VOx catalyst (1)
- Variable excitation (1)
- Virucidality (1)
- Volcano plot (1)
- Volume specific surface area (1)
- Wastewater (1)
- Wastewater treatment (1)
- Water atmosphere (1)
- Water dispersibility (1)
- Water electrolysis (1)
- Water splitting (1)
- Weathering (1)
- White light interferometric microscopy (1)
- White-light Interference Microscopy (1)
- Wide bandgap compound semiconductor (1)
- Wide bandgap compound semiconductors (1)
- Wide bandgap semiconductors (1)
- Wide-bandgap semiconductors (1)
- X-Ray Reflectometry (1)
- X-Ray Spectroscopy (1)
- X-ray Fluorescence (1)
- X-ray absorption Fine Spectroscopy (1)
- X-ray absorption spectroscopy (1)
- X-ray detectors (1)
- X-ray fluorescence (XRF) (1)
- X-ray photoelectron spectroscopy (XPS) (1)
- X-ray refraction (1)
- X-ray scattering (1)
- X-ray spectrometry (1)
- X-ray tomographic (1)
- XANES (1)
- XAS (1)
- XPS background analysis (1)
- XRD (1)
- Xerogel (1)
- Zeta potential (1)
- Zinc oxide (1)
- ZnO (1)
- ZnO nanoparticles (1)
- ZnSe (1)
- ZrO2 nanoparticles (1)
- [MMIM]+[DMP]− (1)
- analytical service (1)
- electron microscopy (1)
- graphene related 2D materials (1)
- k-values (1)
- layered system (1)
- nm films (1)
- shape control (1)
- transmission mode (1)
- wrapping (1)
- µ-FTIR (1)
- µ-Raman (1)
Organisationseinheit der BAM
- 6.1 Oberflächen- und Dünnschichtanalyse (593) (entfernen)
Paper des Monats
- ja (7)
The mechanism of action of zirconium permanent modifiers on graphite surfaces was investigated in order to understand its influence on the analytical signal in atomic and molecular absorption spectrometry (AAS/MAS). For this, the molecule formation of CaF was studied, which is used for the indirect analytical determination of fluorine in high-resolution continuum source graphite furnace molecular absorption spectrometry (HR-CS-GFMAS). The kinetics of this reaction was established by monitoring its molecular spectrum at different atomisation temperatures. An Arrhenius plot showed a pseudo-first order reaction with respect to fluorine (n = 1). An intermediate state was isolated, and its structure was elucidated by spectroscopic methods: scanning electron microscopy with energy dispersive X-ray spectroscopy (SEMEDX), X-ray photoelectron spectroscopy (XPS), X-ray absorption spectroscopy (XANES and EXAFS), and Raman microspectroscopy. We propose here a mechanism, where ZrO2 acts as a heterogeneous catalyst: after a pyrolytic step, an intermediate state of ZrO(OCaF) is activated, and at higher temperatures, CaF(g) is released from the zirconium-coated graphite surface. No evidence of the formation of zirconium carbide was found. Consequently, as the CaF formation is catalysed by a heterogeneous catalyst, surface modifications with ZrO2 nanoparticles and ZrO xerogels were investigated in order to increase the surface area. Their influence was evaluated in the molecule formation of CaF, CaCl, CaBr, and CaI. Graphite furnace modification with zirconium oxide nanoparticles proves to be the best choice for fluorine analysis with a signal enhancement of more than eleven times with respect a non-coated graphite furnace. However, the influence of zirconium modifications in the analytical signals of Cl, and I is lower than the F signals or even negative in case of the Br. Understanding zirconium modifiers as heterogeneous catalysts offers a new perspective to AAS and MAS, and reveals the potential of surface analytical methods for development of improved permanent modifiers and graphite furnace coatings.
Monodisperse iron oxide nanoparticles as reference material candidate for particle size measurements
(2020)
In order to utilize and rationally design materials at the nanoscale the reliable characterization of their physico-chemical properties is highly important, especially with respect to the assessment of their environmental or biological impact. Furthermore, the European Commission’s REACH Regulations require the registration of nanomaterials traded in quantities of at least 1 ton. Powders or dispersions where 50% (number distribution) of the constituent particles have sizes ≤ 100 nm in at least one dimension are defined as nanomaterials. This creates a need for industrial manufacturers and research or analytical service facilities to reliably characterize potential nanomaterials. Currently, BAM is developing reference nanoparticles, which shall expand the scarce list of worldwide available nano reference materials certified for particle size distribution and will also target other key parameters like shape, structure, porosity or functional properties. In this respect, materials like iron oxide or titanium dioxide are considered as candidates to complement the already available silica, Au, Ag, and polystyrene reference nanoparticles.
The thermal decomposition of iron oleate precursors in high boiling organic solvents can provide large quantities of iron oxide nanoparticles that can be varied in size and shape.[1, 2] The presence of oleic acid or other hydrophobic ligands as capping agents ensures stable dispersion in nonpolar solvents. Such monodisperse, spherical particles were synthesized at BAM and pre-characterized by electron microscopy (TEM, SEM including the transmission mode STEM-in-SEM) and dynamic light scattering comparing cumulants analysis and frequency power spectrum.
1. REACH regulations and nanosafety concerns create a strong need for nano reference materials with diverse properties.
2. Iron oxide nanoparticles are under development as new candidate reference material at BAM.
3. Narrow particle size distribution confirmed by light scattering and electron microscopy.
Nanotechnology has enabled the discovery of a multitude of novel materials exhibiting unique physicochemical (PChem) properties compared to their bulk analogues. These properties have led to a rapidly increasing range of commercial applications; this, however, may come at a cost, if an association to long-term health and environmental risks is discovered or even just perceived. Many nanomaterials (NMs) have not yet had their potential adverse biological effects fully assessed, due to costs and time constraints associated with the experimental assessment, frequently involving animals. Here, the available NM libraries are analyzed for their suitability for integration with novel nanoinformatics approaches and for the development of NM specific Integrated Approaches to Testing and Assessment (IATA) for human and environmental risk assessment, all within the NanoSolveIT cloud-platform. These established and well-characterized NM libraries (e.g. NanoMILE, NanoSolutions, NANoREG, NanoFASE, caLIBRAte, NanoTEST and the Nanomaterial Registry (>2000 NMs)) contain physicochemical characterization data as well as data for several relevant biological endpoints, assessed in part using harmonized Organisation for Economic Co-operation and Development (OECD) methods and test guidelines.
Integration of such extensive NM information sources with the latest nanoinformatics methods will allow NanoSolveIT to model the relationships between NM structure (morphology), properties and their adverse effects and to predict the effects of other NMs for which less data is available. The project specifically addresses the needs of regulatory agencies and industry to effectively and rapidly evaluate the exposure, NM hazard and risk from nanomaterials and nano-enabled products, enabling implementation of computational ‘safe-by-design’ approaches to facilitate NM commercialization.
Spectroscopy in Catalysis
(2020)
Knowledge-based catalyst development is always an interaction between preparation, analysis and catalytic testing. Only if these three factors fit together can success be expected. For the analytic side of this triangle, spectroscopic methods play a crucial role. Whereas with diffraction, scattering and microscopy, decisive insights into the structure and morphology of the catalysts can be obtained, spectroscopy produces new knowledge about the chemical nature of the catalyst, e.g., its bonding and valence states.
Aiming at the overall negative surface charge of bacteria, a new strategy of antibacterial agents based on large polymer-modified graphene oxide (GO) sheets is assessed. The presented flexible, polycationic Sheets match the size and charge density of the Escherichia coli surface charge density (2 × 1014 cm−2). These matching parameters create an unspecific but very strong bacteria adsorber by multivalent, electrostatic attraction.
Their interaction with bacteria is visualized via atomic force and confocal microscopy and shows that they effectively bind and wrap around E. coli cells, and thereby immobilize them. The incubation of Gram-negative and -positive bacteria (E. coli and methicillin-resistant Staphylococcus aureus, MRSA) with these polycationic sheets leads to the inhibition of proliferation and a reduction of the colony forming bacteria over time.
This new type of antibacterial agent acts in a different mode of Action than classical biocides and could potentially be employed in medicinal, technical, or agriculture applications. The presented microsheets and their unspecific binding of cell interfaces could further be employed as adsorber material for bacterial filtration or immobilization for imaging, analysis, or sensor technologies.
Preliminary results of an interlaboratory comparison on microplastics organised by plasticsfate
(2023)
Microplastics are everywhere in the environment, but analytics is challenging. Since harmonisation is missing as well es suitable reference materials, BAM did under th umbrella of VAMAS funded by the EU Horizon 2020 project PlasticsFate a ILC for microplastic detection methods. Methods adressed were IR, Raman, Py-GC/MS and TED-GC/MS. The talk gives a first presentation and evaluation on the results.
The talk summarizes challenges in microplastic analysis. It shows the preparation of microplastic reference materials as well as the testing on homogeneity and stability. The reference material is used in an international laboratory comparison to compare different detection methods used for microplastic analysis. The methods used were µ-IR (FTIR+LDIR) for number-based methods and TED-GC/MS and Py-GC/MS for mass-based methods. The ILC was done under the umbrella of VAMAS TWA 45. Results of the participants are presented.
Results from different methods applied to micro- and nanoplastics (MNPs) analysis show that there are large gaps in harmonisation with respect to terminology, size classes, sample preparation protocols and, finally, to the comparability of the measurands and descriptors.
Within the European research cluster to understand the health impacts of micro- and nanoplastics (CUSP) working group WG3-Inter-Laboratory Comparisons an overview of the existing detection methods revealing advantages and disadvantages regarding the analytical tasks is being compiled. There is a clear need to develop high class characterized reference materials for MNPs in the size ranges of 100-10 µm and smaller than 10 µm, so that these can be used to validate methods and to make results comparable. Inter-laboratory comparisons (ILCs) on model samples with complex matrices regarding mass, or water samples for number-based methods, will help us to advance the process of harmonization as well as to train users early in process of developing new methods.
We plan to keep all five CUSP projects well-connected also with the 'outside' MNP projects and ILCs and to extract the optimum of needs, capabilities, and efforts in order to launch new VAMAS ILCs which should expand already available ones.
In this breakout session first, an introduction is given on the planning and organisation of an inter-laboratory comparison (ILC) under the pre-standardisation plattform VAMAS within the newly formed technical working area TWA 45 Micro and Nano Plastics in the Environment. An update with the ILCs on micro- and nanoplastic performed so far is also given. In the third part, the requirements for a reference materials are presented. The needs from the different H2020 micro- and nanoplastic projects are collected and compiled in an ILC matrix for joint activities as the next steps.
Mechanical stress often accelerates the failure of polymer materials. The aim of this research is to study the interaction between the sealing material FKM and biofuels B10 (heating oil with 10% biodiesel). The mechanical stress test was carried out in a special apparatus. Both mechanical and non-mechanical stress tests were conducted on specimens at 20, 40, and 70 °C for 28 days to document changes in mass, volume, and tensile properties. Both increasing temperature and mechanical stress have a significant effect on the tensile strength of the FKM polymer when exposed to B10. The combination of increasing temperature and mechanical stress induced rupture within 2 h. It was also established that FKM polymer with pre-exposure in B10 survived longer during mechanical stress compared to specimens exposed only to air. With the support of infrared (IR) spectroscopy, we were able to confirm the penetration of B10 into the FKM polymer.
The oxides, hydroxides, and oxo-hydroxides of iron belong to the most abundant materials on earth. They also feature a wide range of practical applications. In many environments, they can undergo facile phase transformations and crystallization processes.
Water appears to play a critical role in many of these processes. Despite numerous attempts, the role of water has not been fully revealed yet. We present a new approach to study the influence of water in the crystallization and phase transformations of iron oxides.
The approach employs model-type iron oxide films that comprise a defined homogeneous nanostructure. The films are exposed to air containing different amounts of water reaching up to pressures of 10 bar. Ex situ analysis via scanning electron microscopy, Transmission electron microscopy, selected area electron diffraction, and X-ray diffraction is combined with operando near-ambient pressure X-ray photoelectron spectroscopy to follow water-induced changes in hematite nd ferrihydrite. Water proves to be critical for the nucleation of ematite domains in ferrihydrite, the resulting crystallite orientation, and the underlying crystallization mechanism.
Iron-based catalysts are employed in CO2-FTS due to their ability to convert CO2 into CO in a first step and their selectivity towards higher hydrocarbons in a second CO hydrogenation step. According to the literature, iron carbides represent the active phase for hydrocarbon formation and are claimed to emerge in the presence of CO. We propose nanostructured FeOx films as model systems to assess information about the complex phase transformations during CO2-FTS. Mesoporous hematite, ferrihydrite, maghemite, maghemite/magnetite films were exposed to CO2-FTS atmospheres at 20 bar and 300°C. Up to three distinct phases were observed depending on the timeon-stream (TOS): a sintered maghemite/magnetite phase, a carbidic core-shell structure, and a low-crystalline, needle-type oxide phase. Our findings indicate that the formation of an intermediary maghemite/magnetite phase, predominant after short TOS (30 h), precedes the evolution of the carbide phase.
Yet, even after prolonged TOS (185 h), no full conversion into a bulk carbide is observed.
Novel agar-based test electrolytes are used to perform electrochemical corrosion investigations on ZnFe and ZnNi binary as well as ZnFeMo ternary zinc coatings. The objectives of the electrochemical investigations include the characterization of the corrosion behavior, the description of the protective effect of the coatings as well as the investigation of the layer formation and degradation under artificial aging. ZnFe and ZnFeMo coatings are applied with varying iron content as well as an additional passivation layer, respectively, to study the effect on corrosion resistance. The results show that the protective effect of the coatings is not negatively influenced by different iron contents or the addition of molybdenum. Additional passivation of the ZnFe-containing coatings by means of a passivating agent leads to a significant improvement in the protective effect. Artificial aging leads to slight degradation of the additional passivation layer whereas coatings without post-treatment enhance their protective effect by the formation of corrosion product layers.
A variety of methods used to prepare nano-objects for surface analysis are described along with information about when they might be best applied. Intrinsic properties of NPs which complicate their characterization and need to be considered when planning for surface or other analyses of NPs are identified, including challenges associated with reproducible synthesis and functionalization of the particles as well as their dynamic nature. The relevant information about the sample preparation processes, along with analysis details and data that need to be added to the collection of material provenance information is identified. Examples of protocols that have been successfully used for preparation of nano-objects for surface analysis are included in an annex.
The international ISO Standard 20579‐4, dealing with the history and preparation of nano‐objects for surface analysis, has been developed to help address some of the replication and reproducibility issues caused by the fundamental nature of nanoobjects.
Although all types of samples requiring surface analysis need thoughtful preparation, nano‐objects, for which many properties are controlled by their surfaces, present additional challenges in order to avoid variations and artefacts due to the handling and preparation of materials prior to analysis. This international standard is part of a series of standards related to preparation of samples for surface chemical analysis. Parts 1 and 2 of ISO Standard series 20579 address general issues that apply to many samples. Part 3, which is still in development, will focus on biomaterials. Part 4 specifically considers issues that arise due to the inherent nature of nano‐objects.
Because of sensitivity to their environment, the standard indicates the minimum Information that needs to be reported about the handling and preparation of nano‐objects prior to surface analysis. This information should become part of sample provenance information that helps assure the reliability and usefulness of data obtained from surface‐analysis in the context of the synthesis, processing, and analysis history of a batch of material. Application of this standard can help address reproducibility and traceability issues associated with synthesis, processing, and characterization of nano‐objects in research and commercial applications.
The main objective was to assess homogeneity of two bimodal gold materials, namely nPsize1 and nPSize2, containing approximately 1:1 and 10:1 particle number-based ratio of ~30nm and ~60nm particles. Particle number-based concentration within the two size fractions was determined with spICP-MS using the particle frequency method of calibration.
One aim of the EMPIR nPSize project 17NRM04 was to develop and validate three classes of candidate reference (test) materials (RTMs), with i) well-defined non-spherical shape, ii) relatively high polydispersity index, and iii) accurate particle concentrations.
To fulfil the requirements of the project, 11 different types of materials were prepared. Following the initial assessment of the materials suitability, nPSize5_PT_UNITO, nPSize6_AC_UNITO and nPSize7_GN_CEA materials were found unsuitable for the project, due to various reasons. PT material was deemed unsuitable due to its predominantly agglomerated nature. AC material contained relatively high amount of impurities (other particle forms). GN material was found too heterogeneous in both the length and width for the purpose of the project. The remaining 8 candidate RTMs were assessed for their homogeneity and stability and used for successful delivery of the associated activities within the nPSize project.
One-pot covalent functionalization of 2D black phosphorus by anionic ring opening polymerization
(2022)
In this work, a one-pot approach for the covalent functionalization of few-layer black phosphorus (BP) by anionic ring opening polymerization of glycidol to obtain multifunctional BP-polyglycerol (BP-PG) with high amphiphilicity for near-infrared-responsive drug delivery and biocompatibility is reported. Straightforward synthesis in combination with exceptional biological and physicochemical properties designates functionalized BP-PG as a promising candidate for a broad range of biomedical applications.
Der Vortrag gibt den aktuellen Stand der Normung im Bereich der Oberflächen-technik insbesondere der Oberflächenanalytik und der Oberflächenmess- und -prüftechnik wider.
Vorgestellt wird der Status technischer Berichte, Normenentwürfe und Normen u.a. zur Charakterisierung von funktionellen Glasoberflächen für bioanalytische Anwendungen, zur Messung der Schichtdicke von Nanomaterialien mittels Ellipsometrie, zur Kalibrierung von Interferometern und Interferenzmikroskopen für die Formmessung, zur Rockwelleindringprüfung zur Bewertung der Schicht-haftung, zu den Grundlagen der Ellipsometrie, zur Messung der Schichtdicke mittels Wirbelstromverfahren, zur Schichtpotentialmessung von Mehrfach-Nickelschichten, zu Filtern und Augenschutzgeräten gegen Laserstrahlung sowie zur Bestimmung der Schichthaftung mittels Zugversuch.
Der Vortrag gibt den aktuellen Stand der Normung im Bereich der Oberflächentechnik insbesondere der Oberflächenanalytik und der Oberflächenmess- und -prüftechnik wider. Vorgestellt wird der Status technischer Berichte, Normenentwürfe und Normen u.a. zur Bewertung von Auflösung und Schärfe mit strahlbasierten Methoden im Nanometer- und Mikrometerbereich, zur Messung von Schichtdicken und Nanopartikeln in kritischen Dimensionen einschließlich Größen- und Formverteilungen mittels REM, zur Messung der Schichtdicke von Nanomaterialien und zur Klassifizierung von Kohlenstoffschichten mittels Ellipsometrie, zur Standardisierung der Ellipsometrie, zur Kalibrierung von Konfokalmikros-kopen für die Formmessung, zur linear elastisch dynamischen instrumentierten Eindringprüfung, zur Messung der flächenbezogenen Masse mittels AAS und ICP, zur Schichtpotentialmessung von Mehrfach-Nickelschichten, zur Schichtdicken und Flächen-widerstandsbestimmung sowie zur Bestimmung der Schichthaftung mittels Zentrifugentechnologie.
Der Vortrag gibt den aktuellen Stand der Normung im Bereich der Oberflächen-technik insbesondere der Oberflächenanalytik und der Oberflächenmess- und -prüftechnik wider. Vorgestellt wird der Status technischer Berichte, Normenentwürfe und Normen u.a. zur Charakterisierung von funktionellen Glasoberflächen für bioanalytische Anwendungen, zur Messung der Schichtdicke von Nanomaterialien mittels Ellipsometrie, zur Kalibrierung von Interferometern und Interferenzmikroskopen für die Formmessung, zur Rockwelleindringprüfung zur Bewertung der Schicht-haftung, zu den Grundlagen der Ellipsometrie, zur Messung der Schichtdicke mittels Wirbelstromverfahren, zur Schichtpotentialmessung von Mehrfach-Nickelschichten, zu Filtern und Augenschutzgeräten gegen Laserstrahlung sowie zur Bestimmung der Schichthaftung mittels Zugversuch.
Nanoparticle suspensions were microprinted onto TEM grids for subsequent analysis by SEM/TSEM and evaluation of particle numbers using Image J software. Various nanoparticle types, concentrations and printing conditions (temperature, rel. humidity) were evaluated in order to determine the optimal conditions for producing a uniform distribution of particles on the substrate and eliminating the coffee ring effect.
A series of different nanoparticle suspensions (Gold, Latex, and SiO2 in varying concentrations) were microprinted onto TEM grids in a 4 x 4 array in the concentration range 7x10^8 to 1x10^11 NP/mL and imaged with SEM and TSEM. Concentrations and printing conditions (temperature, relative humidity) were varied in order to minimize the coffee ring effect.
As part of the development of a library of accurate and efficient methods for measurement of nanoparticle properties, we develop and optimize a method for the efficient analysis of nanoparticle size distribution from suspensions via microprinting and digital analysis of electron microscopy (SEM and TEM) images, with the ultimate aim of automated quantitative concentration analysis (calculated from drop volume). A series of different nanoparticle suspensions (gold, latex, and SiO2 in varying sizes and concentrations) were printed onto TEM grids in a 4 x 4 array in the concentration range 7x10^8 to 1x10^11 nanoparticles/mL and imaged with SEM. Concentrations and printing conditions (temperature, relative humidity) were varied in order to minimize the coffee-ring effect.
Nanoparticles have gained increasing attention in recent years due to their potential and application in different fields including medicine, cosmetics, chemistry, and their potential to enable advanced materials. To effectively understand and regulate the physico-chemical properties and potential adverse effects of nanoparticles, validated measurement procedures for the various properties of nanoparticles need to be developed. While procedures for measuring nanoparticle size and size Distribution are already established, standardized methods for analysis of their surface chemistry are not yet in place, although the influence of the surface chemistry on nanoparticle properties is undisputed. In particular, storage and preparation of nanoparticles for surface analysis strongly influences the analytical results from various methods, and in order to obtain consistent results, sample preparation must be both optimized and standardized. In this contribution, we present, in detail, some standard procedures for preparing nanoparticles for surface analytics. In principle, nanoparticles can be deposited on a suitable substrate from suspension or as a powder. Silicon (Si) Wafers are commonly used as substrate, however, their cleaning is critical to the process. For sample preparation from suspension, we will discuss drop-casting and spin-coating, where not only the cleanliness of the substrate and purity of the suspension but also its concentration play important roles for the success of the preparation methodology.
For nanoparticles with sensitive ligand shells or coatings, deposition as powders is more suitable, although this method requires particular care in fixing the sample.
Due to the extremely high specific surface area of nanoparticles and corresponding potential for adsorption, the results of surface analysis can be highly dependent on the history of the particles, particularly regarding sample preparation and storage. The sample preparation method has, therefore, the potential to have a significant influence on the results. This report describes an interlaboratory comparison (ILC) with the aim of assessing which sample preparation methods for ToF-SIMS analysis of nanoparticles provided the most intra- and interlaboratory consistency and the least amount of sample contamination. The BAM reference material BAM-P110 (TiO2 nanoparticles with a mean Feret diameter of 19 nm) was used as a sample representing typical nanoparticles. A total of 11 participants returned ToF-SIMS data,in positive and (optionally) negative polarity, using sample preparation methods of “stick-and-go” as well as optionally “drop-dry” and “spin-coat.” The results showed that the largest sources of variation within the entire data set were caused by adventitious hydrocarbon contamination or insufficient sample coverage, with the spin-coating protocol applied in this ILC showing a tendency toward insufficient sample coverage; the sample preparation method or the participant had a lesser influence on results.
While noncovalent interactions between graphene derivatives and biosystems are extensively studied, less knowledge about their covalent multivalent interactions at biointerfaces is available. Due to the affinity of boronic acids towards cis-diol bearing biosystems, graphene sheets with this functionality were synthesized and their covalent interactions with the bacteria and nematode were investigated. As expected, graphene platforms with boronic acid functionality were able to wrap bacteria and destroy it in a short time. Surprisingly, body of nematodes was ruptured and their viability decreased to 30% after 24 h incubation with the functionalized graphene sheets. Because of their antibacterial and antiparasitic activities as well as their ability for wound dressing, graphene platforms with the boronic acid functionality were further investigated for diabetic wound healing. In vivo experiments showed that graphene platforms are more efficient than the commercially available drug, phenytoin, and restore both infected and non-infected diabetic wounds in ten days. Taking advantage of their straightforward synthesis, strong interactions with different biosystems as well as their ability to heal diabetic wounds, the boronic Acid functionalized graphene sheets are promising candidates for a broad range of future biomedical applications.
Inhibition of respiratory viruses is one of the most urgent topics as underlined by different pandemics in the last two decades. This impels the development of new materials for binding and incapacitation of the viruses. In this work, we have demonstrated that an optimal deployment of influenza A virus (IAV) targeting ligand sialic acid (SA) on a flexible 2D platform enables its binding and wrapping around IAV particles. A series of 2D sialylated platforms consisting graphene and polyglycerol are prepared with different degrees of SA functionalization around 10%, 30%, and 90% named as G-PG-SAL, G-PG-SAM, and G-PG-SAH, respectively. The cryo-electron tomography (Cryo-ET) analysis has proved wrapping of IAV particles by G-PG-SAM.
A confocal-based colocalization assay established for these materials has offered the comparison of binding potential of sialylated and non-sialylated nanoplatforms for IAV. With this method, we have estimated the binding potential of the G-PG-SAM and G-PG-SAH sheets for IAV particles around 50 and 20 times higher than the control sheets, respectively, whereas the low functionalized G-PG-SAL have not shown any significant colocalization value.
Moreover, optimized G-PG-SAM exhibits high potency to block IAV from
binding with the MDCK cells.
Due to its large strength-to-weight ratio and excellent biocompatibility, titanium materials are of paramount importance for medical applications, e.g. as implant material for protheses. In this work, the evolution of various types of laser-induced micro- and nanostructures emerging on titanium or titanium alloys upon irradiation by near-infrared ultrashort laser pulses (925 fs, 1030 nm) in air environment is studied for various laser fluence levels, effective number of pulses and at different pulse repetition rates (1 – 400 kHz). The morphologies of the processed surfaces were systematically characterized by optical and scanning electron microscopy (OM, SEM). Complementary white-light interference microscopy (WLIM) revealed the corresponding surface topographies. Chemical and structural changes were analysed through depth-profiling time-of-flight secondary ion mass spectrometry (TOF-SIMS) and X-ray diffraction (XRD) analyses. The results point towards a remarkable influence of the laser processing parameters on the surface topography, while simultaneously altering the near-surface chemistry via laser-induced oxidation effects. Consequences for medical applications are outlined.
Chemical effects during the formation of femtosecond laser-induced periodic surface structures
(2019)
The processing of laser-induced periodic surface structures (LIPSS, ripples) on metals and semiconductors in ambient air is usually accompanied by superficial oxidation effects – a fact that is widely neglected in the current literature. In this contribution, chemical, structural, and mechanical alterations in the formation of femtosecond LIPSS are characterized by a variety of surface analytical techniques, including energy dispersive X-ray analyses (EDX), X-ray photoelectron spectroscopy (XPS), micro Raman spectroscopy (µ-RS), and depth-profiling Auger electron microscopy (AEM). Alternative routes of electrochemical and thermal oxidation allow to qualify the relevance of superficial oxidation effects on the tribological performance in oil lubricated reciprocating sliding tribological tests (RSTT). It is revealed that the fs-laser processing of near-wavelength sized LIPSS on metals leads to the formation of a few hundreds of nanometers thick graded oxide layers, consisting mainly of amorphous oxides. Regardless of reduced hardness and limited thickness, this nanostructured surface layer efficiently prevents a direct metal-to-metal contact in the RSTT and may also act as an anchor layer for specific wear-reducing additives contained in the used engine oil.
The processing of laser-induced periodic surface structures (LIPSS, ripples) on metals and semiconductors in ambient air is usually accompanied by superficial oxidation effects - widely neglected in the current literature. In this contribution, chemical, structural, and mechanical alterations in the formation of femtosecond LIPSS are characterized by a variety of surface analytical techniques, including energy dispersive X-ray analyses (EDX), X-ray photoelectron spectroscopy (XPS), micro Raman spectroscopy (µ-RS), and depth-profiling Auger electron microscopy (AEM). Alternative routes of electrochemical and thermal oxidation allow to qualify the relevance of superficial oxidation effects on the tribological performance in oil lubricated reciprocating sliding tribological tests (RSTT). It is revealed that the fs-laser processing of near-wavelength sized LIPSS on metals leads to the formation of a few hundreds of nanometer thick graded oxide layer, consisting mainly of amorphous oxides.
Regardless of its reduced hardness and limited thickness, this nanostructured surface layer can effciently prevent a direct metal-metal contact in the RSTT and may also act as an anchor layer for specific wear-reducing additives contained in the engine oil involved
Laser-induced periodic surface structures (LIPSS) have gained remarkable attention as they represent a universal phenomenon that is often accompanying laser-processing. Such LIPSS enable a large variety of different surface functionalizations for applications in the fields of optics, fluidics, tribology, or medicine. Moreover, so-called “high spatial frequency LIPSS” (HSFL) provide an appealing and straightforward way for surface nanostructuring featuring spatial periods even below 100 nm – far beyond the optical diffraction limit. However, the imposed surface functionalities are usually caused by both, topographic and chemical surface alterations. For exploring these effects in detail, multi-method characterizations were performed here for HSFL on processed Ti- 6Al- 4V alloy upon irradiation with near-infrared ps-laser pulses (1030 nm wavelength, ~1 ps pulse duration, 1 – 400 kHz pulse repetition rate) under different laser and scan processing conditions. The sample characterization involved morphological and topographical investigations by scanning electron microscopy (SEM), atomic force microscopy (AFM), stylus profilometry (SP), and white light interference microscopy (WLIM), as well as near-surface chemical analyses by X-ray photoelectron spectroscopy (XPS), hard X-ray photoelectron spectroscopy (HAXPES) and depth-profiling time-of-flight secondary ion mass spectrometry (TOF-SIMS). The results allow to qualify the laser ablation depth, the geometrical HSFL characteristics and provide detailed insights into the depth extent and the nature of the ps-laser-induced near-surface oxidation. Significance for medical applications will be outlined.
Laser-induced periodic surface structures (LIPSS) and their combination with self-ordered microstructures forming hierarchical Spikes enable a large variety of different surface functionalizations for applications in the fields of optics, fluidics, tribology, or medicine. Moreover, high spatial frequency LIPSS (HSFL) provide an appealing and straightforward way for surface nanostructuring featuring spatial periods even below 100 nm – far beyond the optical diffraction limit. However, the imposed surface functionalities are usually caused by both, topographic and chemical surface alterations. For exploring these effects in detail, multi-method characterizations were performed here for HSFL and hierarchical Spikes processed on Ti-6Al-4V alloy upon irradiation with near-infrared ps-laser pulses (1030 nm wavelength, ~1 ps pulse duration, 1 – 400 kHz pulse repetition rate) under different laser and scan processing conditions. The following sample characterization involved morphological and topographical investigations by scanning electron microscopy (SEM), atomic force microscopy (AFM), stylus profilometry (SP), and white light interference microscopy (WLIM), as well as near-surface chemical analyses by X-ray photoelectron spectroscopy (XPS), hard X-ray photoelectron spectroscopy (HAXPES) and depth-profiling time-of-flight secondary ion mass spectrometry (TOF-SIMS). The results allow to qualify the laser ablation depth, the geometrical HSFL/Spikes characteristics and provide detailed insights into the depth extent and the nature of the ps-laser-induced near-surface oxidation arising from the laser-processing in ambient air and into the relevance of heat-accumulation effects at high pulse repetition rates. Moreover, the direct comparison of the HAXPES and XPS data reveals the role of surface-covering organic contaminants adsorbed from the ambient atmosphere without the uncertainties and potential sputter reduction potentially caused by ion-sputter depth profiling.
Laser-induced periodic surface structures (LIPSS) enable a large variety of different surface functionalizations for applications in the fields of optics, fluidics, tribology, or medicine. Moreover, high spatial frequency LIPSS (HSFL) provide an appealing and straightforward way for the generation of surface nanostructures featuring spatial periods even below 100 nm – far beyond the optical diffraction limit. However, the imposed surface functionalities are usually caused by both, topographic and chemical surface alterations. For exploring these effects in detail, multi-method characterization was performed here for HSFL processed on Ti-6Al-4V alloy upon irradiation with near-infrared ps-laser pulses (1030 nm wavelength, ~1 ps pulse duration, 1 – 400 kHz pulse repetition rate) under different scan processing conditions. The subsequent sample characterization involved morphological and topographical investigations by scanning electron microscopy (SEM), atomic force microscopy (AFM), stylus profilometry (SP), as well as near-surface chemical analyses by X-ray photoelectron spectroscopy (XPS), hard X-ray photoelectron spectroscopy (HAXPES) and depth-profiling time-of-flight secondary ion mass spectrometry (TOF-SIMS). The results allow to qualify the laser ablation depth, the geometrical HSFL characteristics and provide detailed insights into the depth extent and the nature of the ps-laser-induced near-surface oxidation arising from the laser-processing in ambient air and into the relevance of heat-accumulation effects at high pulse repetition rates. Moreover, the direct comparison of the HAXPES and XPS data reveals the role of surface-covering organic contaminants adsorbed from the ambient atmosphere without ion-sputter depth profiling. Furthermore, reduction of the oxides by sputtering can be avoided.
The plastic value chain, central part of modern living, caused environmental pollution and bioaccumulation of plastic nanoparticles (PNPs). Their ubiquitous presence in different environmental and biological compartments has become a serious threat to human health and ecosystems. Frequently used plastic materials such as polypropylene (PP), polystyrene (PS) and polyethylene (PE) have been detected in the form of PNPs in the food chain, soil, water and air, as well as in human feces and blood. In this study, we aimed to provide novel insights in endocrine disrupting properties of PNPs using in vitro estrogen receptor (ER) transactivation assay. The effects of PP-NPs, PE-NPs and PS-NPs and their mixture on T47D-KBluc cell line stably transfected with luciferase as reporter enzyme was evaluated by means of cytotoxicity, cellular uptake and ER activation. Tested dose range for PNPs was 0.001 – 10 mg/L. Both cellular uptake and cytotoxicity for all PNPs was found to be dose-dependent. Only the highest dose of PP-NPs and PE-NPs induced apoptosis and cell death, while PS-NPs were not cytotoxic in tested dose range. For tested concentrations, PP-NPs and PE-NPs showed significant agonistic activity on ER, while PS-NPs cannot be considered ER active. When, applied as mixture, PNP demonstrated additive toxicity effects compared to the effect of each individual PNPs. Additivity was also observed for ER agonistic effect of PNPs mixture according to the benchmark dose-addition modelling approach. This study provides missing science-based evidence on endocrine disrupting effects of PE-NPs, PP-NPs, PS-NPs and their mixtures and highlights the importance of considering unintentional, aggregate and combined exposure to different PNPs in risk management.
Data for the publication "The role of extracellular polymeric substances of fungal biofilms in mineral attachment and weathering" (https://doi.org/10.1038/s41529-022-00253-1). It includes:
- The Summary of the EPS concentration, EPS sugar components and EPS linkages.
- The Summary of the XPS analysis of freeze-dried biofilm samples of all strains.
- The Summary of the pH, Mg, SI and Fe concentration, biomass and olivine dissolution rate for each time point of all dissolution experiments.
The roles extracellular polymeric substances (EPS) play in mineral attachment and weathering were studied using genetically modified biofilms of the rock-inhabiting fungus Knufia petricola strain A95. Mutants deficient in melanin and/or carotenoid synthesis were grown as air-exposed biofilms. Extracted EPS were quantified and characterised using a combination of analytical techniques. The absence of melanin affected the quantity and composition of the produced EPS: mutants no longer able to form melanin synthesised more EPS containing fewer pullulan-related glycosidic linkages. Moreover, the melanin-producing strains attached more strongly to the mineral olivine and dissolved it at a higher rate. We hypothesise that the pullulan-related linkages, with their known adhesion functionality, enable fungal attachment and weathering. The released phenolic intermediates of melanin synthesis in the Δsdh1 mutant might play a role similar to Fe-chelating siderophores, driving olivine dissolution even further. These data demonstrate the need for careful compositional and quantitative analyses of biofilm-created microenvironments.
Tour de table - BAM
(2021)
Electron microscopy (EM) is the gold standard for the characterisation of the morphology (size and shape) of nanoparticles. Visual observation of objects under examination is always a necessary first step in the characterisation process. Several questions arise when undertaking to identify and count particles to measure their size and shape distribution. In addition to challenges with the dispersion and identification of the particles, more than one protocol for counting particles is in use. This paper focuses on precise rules for the counting of particles in EM micrographs, as this influences the measurement accuracy of the number of particles, thus implicitly affecting the size values of the counted particles. We review and compare four different, commonly used methods for counting, which we then apply in case studies. The impact of the selected counting rule on the obtained final particle size distribution is highlighted. One main aim of this analysis is to support the application of a specific, well-defined counting approach in accordance with regulatory
requirements to contribute to achieving more reliable and reproducible results. It is also useful for the new harmonised measurement procedures for determining the particle size and particle size distribution of nanomaterials.
Die gemeinsame Forschungsstrategie der Bundesoberbehörden zur Nanotechnologie wurde 2016 veröffentlicht. Die darin enthaltenen Aufgaben wurden von den Bundesoberbehörden vielfältig bearbeitet. Diese Präsentation gibt einen Überblick über die Projekte, die von der BAM bis 2019 bearbeitet wurden/werden und sich in den Rahmen der Forschungsstrategie einordnen.
Hydrogen economy is a central aspect of future energy supply, as hydrogen can be used as energy storage and fuel. In order tomake water electrolysis efficient, the limiting oxygen evolution reaction (OER) needs to be optimized. Therefore, C-based composite materials containing earth-abundant Fe and Mn were synthesized, characterized and tested in the OER. For pyrolysis temperatures above 700°C N-rich multi-walled carbon nanotubes (MWCNT) are obtained. Inside the tubes Fe3C particles are formed, Fe and Mn oxides are incorporated in the carbon matrix and metal spinel nanoparticles cover the outer surface. The best catalyst prepared at 800°C achieves a low overpotential of 389 mV (at 10 mA/cm2) and high stability (22.6 h). From electrochemical measurements and characterization it can be concluded that the high activity is mainly provided by MWCNT, Fe3C and the metal oxides in the conductive carbon matrix. The metal spinel nanoparticles in
contrast protect the MWCNT from oxidation and thereby contribute to the high stability.
For the large-scale generation of hydrogen via water electrolysis the design of long term stable and active catalysts for the oxygen evolution reaction (OER) remains a key challenge. Most catalysts suffer from severe structural corrosion that becomes even more pronounced at fluctuating potentials. Herein, MnCo based cubic particles were prepared via a hydrothermal approach, in which the edge length of the micron-sized particles can be controlled by changing the pH value of the precursor solution. The cubes are composed of varying amounts of MnCo2O4, CoCO3 and a mixed (Mn/Co)CO3 phase. Structure–activity relationships were deduced revealing a volcano-type behavior for the intrinsic OER activity and fraction of spinel oxide phase.
A low overpotential of 0.37 V at 10 mA cm−2 and a stability of more than 25 h was achieved in 1.0 M KOH using a rotating disc electrode (RDE) setup. The best performing catalyst material was successfully tested under dynamic process conditions for 9.5 h and shows a superior catalytic activity as anode for the Overall water splitting in an electrolyser setup in 1.0 M KOH at 333 K compared to a reference NiCo-spinel catalyst.
The new recommended definition of a nanomaterial, 2022/C 229/01, adopted by the European Commission in 2022, will have a considerable impact on European Union legislation addressing chemicals, and therefore tools to implement this new definition are urgently needed. The updated NanoDefiner framework and its e-tool implementation presented here are such instruments, which help stakeholders to find out in a straightforward way whether a material is a nanomaterial or not. They are two major outcomes of the NanoDefine project, which is explicitly referred to in the new definition. This work revisits the framework and e-tool, and elaborates necessary adjustments to make these outcomes applicable for the updated recommendation. A broad set of case studies on representative materials confirms the validity of these adjustments. To further foster the sustainability and applicability of the framework and e-tool, measures for the FAIRification of expert knowledge within the e-tool’s knowledge base are elaborated as well. The updated framework and e-tool are now ready to be used in line with the updated recommendation. The presented approach may serve as an example for reviewing existing guidance and tools developed for the previous definition 2011/696/EU, particularly those adopting NanoDefine project outcomes.
NanoDefiner e-Tool: An Implemented Decision Support Framework for Nanomaterial Identification
(2019)
The European Commission’s recommendation on the definition of nanomaterial (2011/696/EU) established an applicable standard for material categorization. However, manufacturers face regulatory challenges during registration of their products. Reliable categorization is difficult and requires considerable expertise in existing measurement techniques (MTs). Additionally, organizational complexity is increased as different authorities’ registration processes require distinct reporting.
The NanoDefine project tackled these obstacles by providing the NanoDefiner e-tool: A decision support expert system for nanomaterial identification in a regulatory context. It providesMT recommendations for categorization of specific materials using a tiered approach (screening/confirmatory), and was constructed with experts from academia and industry to be extensible, interoperable, and adaptable for forthcoming revisions of the nanomaterial definition. An implemented MT-driven material categorization scheme allows detailed description. Its guided workflow is suitable for a variety of user groups. Direct feedback and explanation enable transparent decisions. Expert knowledge is Held in a knowledge base for representation of MT performance criteria and physicochemical particle type
properties. Continuous revision ensured data quality and validity. Recommendations were validated by independent case studies on industry-relevant particulate materials. Besides supporting material identification and registration, the free and open-source e-tool may serve as template for other expert systems within the nanoscience domain.
Reliable standards are required to support research and development as well as end-user in application. Appropriate standards have to fulfill three requirements: small uncertainty, easy to use and low overall costs of application. For calibration of microscopes at nanoscale and/or element analysis special requirements for standards are given, which are challenging in manufacture.