Filtern
Dokumenttyp
- Beitrag zu einem Tagungsband (4)
- Vortrag (3)
- Zeitschriftenartikel (2)
Schlagworte
- Scatter (9) (entfernen)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (3)
Safety aspects of the storage containments of hydrogen are independent from the kind of usage: The main criteria is the resistance against the pressure load. On the 2nd level there are aspects specific to the usage as e.g. crash loads etc.
Safety is achieved when the probability (frequency) of a failure during the service life is acceptable!
But an aspect common for all usages is the scatter of properties resulting from the material and the production. Therefore, it is worth to have a look on the current approach of minimum burst ratios from an unknown point of view: the basic populations of a product – based on exemplarily assessments.
According to this approach, several diagrams with Monte-Carlo generated basic populations in new and aged conditions have been shown. Thus, it has been demonstrated that not the conditions at the begin of life are the critical ones. No, the end of life properties are the critical ones.
This has been combined with the acceptance rate of borderline basic populations. The approach of minimum burst ratios leads to the acceptance rate of 40 % and higher for the approval of critical basic populations – critical due to their production scatter.
This problem becomes much more critical when taking into account the unknown effects of degradation and in-service ageing.
Therefore, we cannot support the proposed reduction of minimum burst ratio without having a stronger assessment of production scatter.
Composite materials show a degradation of properties depending on Service life. This creates the necessity to find tailored methods to determine strength and residual strength of composite cylinders. The determination can be done e.g. by load cycles tests. The result needs a Statistical assessment for the precise description of strength. Especially the Statistical assessment of load cycle strength properties has a high uncertainty. It is unclear if a Log-Normal distribution, a WEIBULL distribution or others, describe the scatter behaviour of residual strength properties correctly. Distribution functions aim at approximating the frequency of occurrence of residual load cycle strength for high survival rates. An assumption has to be found and confirmed to prevent overestimation of reliability.
Sensing characteristics of standard polymer
optical fibers (POF) are further studied using the optical time
domain reflectometry (OTDR) technique. The level of the
backscattering inside POF, which highly increases at locations
where strain is applied to the fiber, is further investigated with
respect to spectral behavior, strain rate and span of time from
the stretching event. An algorithem to overcome the problem of
the decrease of spatial resolution as a result of pulse
broadening due to modal disperion, is proposed. The research
is carried out on the background of the development of a new
strain sensor that is integrated in technical textiles.
Determining scatter ratios at high energies (> ~ 1MeV) presents challenges not immediately obvious from measurements at conventional X-ray energies. This includes reduced attenuation even in heavy elements as well as a stronger forward bias of scattering. In order to check the reliability of different measurement setups with regard to material thicknesses, distances, and collimation, attenuation and scattering were separately simulated using a Monte Carlo model. The simulation results help in understanding the sources of radiation scattered into the detection area, thereby aiding in eliminating undesired contributions.
This presentation explains how the evaluation of technical requirements in regulations effects safety level. This shown by using the Monte-Carlo experiment consequently.
The first step is to explain how deterministic requirements and how probabilistic requirements work. Then the statistical behaviour of the generally unknown basic population can be described and that his behaviour is independent from the regulatory approach. Subsequently, the concept of evaluating sample test results with respect to deterministic requirements is explained. The item “acceptance rate” of the basic population that is behind each sample and behind each individuum in a sample is defined. On this collective understanding, the differences in evaluation between the probabilistic approach PA and the most important RC&S are discussed. Some areas are validated in contradictorily. Then the parameters for acceptance of burst strength in the UN-GTR#13 are varied and opens the door for an accurate improvement of acceptance criteria. Finally, the special aspects of degradation in load cycle testing are shown. There, two aspects must be differentiated, the current reliability and its degradation by ongoing load cycles. This is a convincing argument against the very common opinion, which means that the number of hydraulically tested load cycles pro-vides a figure for the number of acceptable filling cycles.
This presentation mentions the most important safety items that should be improved from the perspective of Germany.
These are the improvement of the understanding and definition of term "safety", the agreement on procedures for the measurement of safety and the issue of degradation in combination with the safety level to be ensured until end of life.
For using probabilistic experience for the whole production adequate measures for surveillance of the production should additionally become mandatory to be taken into account.
The essential aspects of these issues are shortly explained and highlighted by especially aspects of the slow burst testing with respect to non-cycle fatigue sensitive designs and the hint on the general scatter of properties (Monte-Carlo simulation).
Slow burst testing of samples as a method for quantification of composite cylinder degradation
(2014)
The current practise to focus periodic retesting of composite cylinders primarily on the hydraulic pressure test has to be evaluated as critical. The test itself always causes a certain amount of micro damage to the cylinders but does not necessarily deliver sufficient and evaluable information. Thus BAM Federal Institute of Materials Research and Testing (Germany) moves the focal point to a new approach for validation of composite cylinders, based on destructive sample tests parallel to operation. Statistical assessment of results of these destructive tests is employed for the estimation of remaining safe service life, based on reliability demands. The estimated service life is also used for the determination of re-test periods of the examined population of composite cylinders.
An essential aspect of this approach is the validation of current residual strength and its prediction at any point of service life. In cases of gas cylinders with very high cycle strength, residual strength cannot be quantified statistically by means of hydraulic load cycles. As a replacement, creep tests or burst tests may be employed. BAM suggests the 'slow burst test SBT' as a combination of these two test procedures. This is a compromise between the practicability of the (conventional) burst test and the practical relevance of sustained loads during service, to be tested in creep rupture tests. In this paper, a variety of 99 burst results of a cylinder design type used for breathing apparatus (CFRP with PE-liner) is evaluated. The influence of test procedure parameters and nature and intensity of artificial ageing on the test sample strength are analysed statistically. This leads to an evaluation of different procedures of artificial ageing and the recommendation to substitute conventional burst tests by slow burst tests for the assessment of composite pressure receptacles.