Filtern
Dokumenttyp
Sprache
- Ungarisch (3) (entfernen)
Referierte Publikation
- nein (3)
Schlagworte
- Sicherheitstechnische Kenngrößen (3) (entfernen)
The knowledge of the explosion limits of biogases in air is necessary to define explosion protection measures. Biogases from agricultural plants vary however in their composition, so that for each gas composition the explosion limits would have to be measured. Frequently the explosion limits of biogas are therefore referred in the safety-relevant literature only to the methane fraction of the gas mixture, without indicating this additionally. This leads to the fact that the explosion ranges for the total mixture consists of methane, carbon dioxide and further residual gases are falsely specified.
For this reason a simple method is presented in the following, which show, how the explosion limits of a biogas can be determined from its methane content using an explosion diagram of methane/carbon dioxide/air system. The explosion diagram was measured according to the German Standard DIN 51649-1.
The presented calculation method supplies however correct results only if the nitrogen fraction in the biogas does not exceed approx. 5 % by volume.
Mathematische Methoden wie Interpolation und Extrapolation sollen bei der Auswertung von Messkurven als Screening-Methode verwendet werden, um die sicherheitstechnisch gefährlichen Bereiche kennzeichnen. Ein Vergleich der Ergebnisse werden hier dargestellt, die die Autoren mit Hilfe von verschiedenen kubischen Spline-Methoden erhalten haben. Mehrere Methoden sind in das Programm TRIANGLE der BAM implementiert. Das Programm kann aus den Messdaten, die nicht das gesamte Explosionsbereich beinhalten, erkennen, dass die Auswertung der Daten entweder abbrechen soll oder mit einem eingefügten Punkt ergänzen soll. Diese Arbeiten sind in einer Zusammenarbeit zwischen BAM und der Budapester Technischen und Wirtschaftsuniversität (BUTE) durchgeführt. Das Programm wurde auch so weiterentwickelt, dass ausgehend von den Excell-Tabellen der Messdaten mehrerer Gasgemisch-Systeme ein Word-Dokument als Zusammenfassung erstellt werden kann.