Filtern
Dokumenttyp
Sprache
- Englisch (6)
Schlagworte
- Density measurements (6) (entfernen)
Organisationseinheit der BAM
The experimental density data of the binary System nitrogen−hydrogen available at the time of the development of the equation of state for natural gases and related mixtures, GERG-2008, were limited to hydrogen contents higher than 0.15 (amount-of-substance fraction) and temperatures above 270 K. This work provides accurate experimental (p, ρ, T) data for three binary mixtures of nitrogen and hydrogen: (0.95 N2 + 0.05 H2), (0.90 N2 + 0.10 H2), and (0.50 N2 + 0.50 H2) at temperatures of 240, 250, 260, 275, 300, 325, and 350 K, thus extending the range of available experimental data to low hydrogen contents and low temperatures. The density measurements were performed by using a single-sinker densimeter with magnetic suspension coupling at pressures up to 20 MPa. Experimental data were compared with the corresponding densities calculated from the GERG-2008 and the AGA8-DC92 equations of state. The relative deviations of the experimental data from both equations of state were within the estimated uncertainty value of the equations. Therefore, the experimental data agree very well with the values estimated from the equations. The virial coefficients B(T,x), C(T,x), and D(T,x) as well as the second interaction virial coefficient B12(T) for the nitrogen−hydrogen binary system were also calculated from the experimental data set at temperatures from 240 to 350 K. The resulting values agree with those from literature.
The decarbonization of the energy sector is driving the interest in hydrogen as an energy-storage medium. A practical alternative to transport and distribute H2 is using the existing infrastructure for natural gas. The GERG-2008 equation of state currently serves as the ISO standard (ISO 20765-2) for the calculation of thermodynamic properties of natural gas, but H2 appears only as a secondary component.
The availability of consolidated data for mixtures with H2 available at the time of its constitution was very limited. The experimental characterization of the thermodynamic behavior of mixtures of H2 with the main components of natural gas is thus of great relevance to validate and improve the GERG-2008 equation of state for its use with H2-enriched natural gas.
Continuing our study on (CO2 + O2) mixtures, this work reports new experimental (p, rho, T) data for two oxygen-rich mixtures with mole fractions x(O2) = (0.50 and 0.75) mol·mol−1, in the temperature range T = (250–375) K and pressure range p = (0.5–20) MPa, using a single-sinker densimeter. Experimental density data were compared to two well-established equation-of-state models: EOS-CG and GERG-2008. In the p, T-range investigated, the EOS-CG gave a better reproduction for the equimolar mixture (x(O2) = 0.5), whereas the GERG-2008 performed significantly better for the oxygen-rich mixture (x(O2) = 0.75). The EOS-CG generally overestimates the density, while the GERG-2008 underestimates it. This complete set of new experimental data, together with previous measurements, is used to calculate the virial coefficients B(T, x) and C(T, x), as well as the second interaction virial coefficient B12(T) for the (CO2+ O2) system.
On the way to a low carbon economy mixtures containing carbon dioxide become increasingly important. Processing of such gas mixtures requires reliable thermodynamic models that can accurately describe the state of matter over an extended range. Mixtures with oxygen for example, are frequently encountered in carbon capture and storage (CCS) processes.
This work reports new experimental (p, rho, T) data at T = (250 to 375 K) and up to a maximum pressure pmax = 20 MPa for five binary (CO2 + O2) mixtures which cover the entire composition range.
In the last few years, coal mine methane (CMM) has gained significance as a potential non-conventional gas fuel. The progressive depletion of common fossil fuels reserves and, on the other hand, the positive estimates of CMM resources as a by-product of mining promote this fuel gas as a promising alternative fuel. The increasing importance of its exploitation makes it necessary to check the capability of the present-day models and equations of state for natural gas to predict the thermophysical properties of gases with a considerably different composition, like CMM. In this work, accurate density measurements of a synthetic CMM mixture are reported in the temperature range from (250 to 400) K and pressures up to 15 MPa, as part of the research project EMRP ENG01 of the European Metrology Research Program for the characterization of non-conventional energy gases. Experimental data were compared with the densities calculated with the GERG-2008 equation of state. Relative deviations between experimental and estimated densities were within a 0.2% band at temperatures above 275 K, while data at 250 K as well as at 275 K and pressures above 10 MPa showed higher deviations.
Experimental characterization of the thermodynamic behavior of multicomponent gas mixtures of accurately known composition with traceability to National Standard is of great importance for testing the current reference equation of state (EoS) for natural gases and related mixtures, GERG-2008. Natural gas composition may change considerably due to the diversity of origins, or the possibility to incorporate hydrogen, biomethane or other non-conventional energy gases.
In this work, density measurements for three synthetic mixtures, representing two biomethane mixtures and a typical natural gas composition, are presented. Results are compared to the current reference EoS for natural gases and related mixtures, i.e., GERG-2008 and AGA8-DC92.