• Treffer 48 von 75
Zurück zur Trefferliste

Material response of GMA welded 1 mm thick DP600 overlap joints

  • In a previously published model, gas metal arc welding of 1 mm thick DP600 overlap joints is validated for the transient temperature distribution, the welding distortion and longitudinal residual stresses. Tensile tests have been simulated and performed experimentally. Validations were performed for two clamping cases: an immediate release of the clamps after welding and a release of the clamps after cooling to room temperature. There is good agreement between experiments and simulations. It has been found that the temperature distribution, longitudinal stresses and welding distortions are dependent on the clamping conditions. To explain the effect of the clamping time, a bar model is proposed. It is shown that longer clamping times increase plastic deformation and hence reduce residual stresses and buckling distortion. Additionally for an overlap joint, it has been found that the longitudinal residual stresses are affected significantly by the sample's geometry.

Metadaten exportieren

Weitere Dienste

Teilen auf Twitter Suche bei Google Scholar Anzahl der Zugriffe auf dieses Dokument
Metadaten
Autor*innen:T. Schenk, Christopher Schwenk
Dokumenttyp:Zeitschriftenartikel
Veröffentlichungsform:Verlagsliteratur
Sprache:Englisch
Titel des übergeordneten Werkes (Englisch):Science and technology of welding and joining
Jahr der Erstveröffentlichung:2010
Herausgeber (Institution):Institute of Materials, Minerals and Mining
Verlag:Maney
Verlagsort:London
Jahrgang/Band:15
Ausgabe/Heft:7
Erste Seite:567
Letzte Seite:574
Freie Schlagwörter:Buckling distortion; DP600 overlap joint; Longitudinal residual stresses; Welding simulation
DOI:10.1179/136217110X12714217309777
ISSN:1362-1718
ISSN:1743-2936
Verfügbarkeit des Dokuments:Physisches Exemplar in der Bibliothek der BAM vorhanden ("Hardcopy Access")
Bibliotheksstandort:Sonderstandort: Publica-Schrank
Datum der Freischaltung:19.02.2016
Referierte Publikation:Ja
Datum der Eintragung als referierte Publikation:01.11.2010
Einverstanden
Diese Webseite verwendet technisch erforderliche Session-Cookies. Durch die weitere Nutzung der Webseite stimmen Sie diesem zu. Unsere Datenschutzerklärung finden Sie hier.