• Treffer 6 von 18
Zurück zur Trefferliste

Use of municipal solid waste incinerator bottom ash as aggregate in concrete

  • As a result of their chemical and mineralogical characteristics, bottom ashes from municipal solid waste incinerators can, in principle, be used as aggregates in the production of normal strength concrete. However, because the ashes contain concrete-damaging components, such as chlorides, sulphates and organic compounds, or excessive quantities of fines, aluminium and waste glass, recycling becomes problematic. In particular, inclusions of aluminium in the ash particles and a glass content of about 15% cause considerable cracks and spalling in concrete specimens within a very short time. The harmful substances can be reduced or removed by additional treatments, such as upstream sieving and washing, waste glass separation, and lye treatment with sodium hydroxide solution. Tests on concretes with 2–32 mm bottom ash as coarse aggregates indicate that the quality of the ash is actually improved by the additional processing. Thus concretes with a compressive strength of C20/25 can easily beAs a result of their chemical and mineralogical characteristics, bottom ashes from municipal solid waste incinerators can, in principle, be used as aggregates in the production of normal strength concrete. However, because the ashes contain concrete-damaging components, such as chlorides, sulphates and organic compounds, or excessive quantities of fines, aluminium and waste glass, recycling becomes problematic. In particular, inclusions of aluminium in the ash particles and a glass content of about 15% cause considerable cracks and spalling in concrete specimens within a very short time. The harmful substances can be reduced or removed by additional treatments, such as upstream sieving and washing, waste glass separation, and lye treatment with sodium hydroxide solution. Tests on concretes with 2–32 mm bottom ash as coarse aggregates indicate that the quality of the ash is actually improved by the additional processing. Thus concretes with a compressive strength of C20/25 can easily be produced. Similar to concretes made with recycled aggregates, these concretes exhibit 15% lower compressive strength and E-modulus but twice the porosity of control specimens containing exclusively natural sand and gravel. However, only those concretes that were made with ash with a low aluminium content as a result of lye treatment remained free of damage.zeige mehrzeige weniger

Metadaten exportieren

Weitere Dienste

Teilen auf Twitter Suche bei Google Scholar Anzahl der Zugriffe auf dieses Dokument
Metadaten
Autor*innen:Katrin RübnerORCiD, Frank Haamkens, O. Linde
Dokumenttyp:Zeitschriftenartikel
Veröffentlichungsform:Verlagsliteratur
Sprache:Englisch
Titel des übergeordneten Werkes (Englisch):Quarterly Journal of Engineering Geology and Hydrogeology
Jahr der Erstveröffentlichung:2008
Herausgeber (Institution):Geological Society
Verlagsort:London, UK
Jahrgang/Band:41
Ausgabe/Heft:4
Erste Seite:459
Letzte Seite:464
Freie Schlagwörter:Aggregate; Concrete; Engineering properties; Municipal solid waste incinerator bottom ash; Waste material
DOI:10.1144/1470-9236/07-036
ISSN:1470-9236
ISSN:0481-2085
Verfügbarkeit des Dokuments:Physisches Exemplar in der Bibliothek der BAM vorhanden ("Hardcopy Access")
Bibliotheksstandort:Sonderstandort: Publica-Schrank
Datum der Freischaltung:19.02.2016
Referierte Publikation:Ja
Datum der Eintragung als referierte Publikation:26.01.2009
Einverstanden
Diese Webseite verwendet technisch erforderliche Session-Cookies. Durch die weitere Nutzung der Webseite stimmen Sie diesem zu. Unsere Datenschutzerklärung finden Sie hier.