Refine
Document Type
- Article in a Periodical of the TH Wildau (15)
- Article (7)
- Conference Proceeding (3)
- Part of a Book (1)
- Diploma Thesis (1)
- Part of Periodical (1)
Year of publication
- 2011 (28) (remove)
Institute
Has Fulltext
- yes (28)
Is part of the Bibliography
- yes (28)
Keywords
- CMOS (1)
- Raman (1)
- SOI waveguide (1)
- band-pass filter (1)
- carbon (1)
- hardness (1)
- micro-cavity (1)
- micro-resonator (1)
- nanoindentation (1)
- palladium (1)
Raman scattering in planar silicon on insulator (SOI) waveguides with 2 μm width, 220 nm height and 2 cm length is investigated. A cw Nd:YAP laser at 1340.6 nm with 7 GHz FWHM spectral width is used as the pump source. A lensed fiber of 2.5 μm focus diameter is used to couple the pump laser into the waveguide. The coupling efficiency is estimated to be around 10%. Spontaneous Raman scattering is observed with as low as 2.5 mW pump power inside the waveguide. The spontaneous Raman spectrum is measured by an optical spectrum analyzer. The first order Raman peak is measured at around 1441.4 nm corresponding to a Raman shift of 15.6 THz, while the FWHM of Raman spectrum is measured as around 100 GHz. Maximum Raman output of around 90 pW is obtained by around 22 mW pump. The stimulated Raman gain coefficient is estimated as around 56 cm/GW from the relationship between spontaneous Raman output power and pump power. A temperature dependence of Raman frequency shift of about 0.6 GHz/K is measured. The spontaneous anti-Stokes Raman scattering output peak at 1253 nm is also observed with around 35 mW pump. Stimulated Raman amplification measurement is carried out with a SLED white light source as probe signal. With 35 mW pump power, around 0.6 dB gain has been determined with both pump and probe being TE polarized.
We have designed, fabricated and investigated one-dimensional (1D) micro-cavities in Silicon-on-Insulator (SOI) waveguides. The single mode waveguides are fabricated in a 220 nm silicon device layer. The 1D micro-cavities in Fabry-Perot structure consist of two Bragg-mirror regions formed by a sinusoidal modulation of the waveguide width. The mirror regions are separated by a sub-micron spacer. The SOI photonic structures are produced in a CMOS environment using 248 nm DUV lithography. The waveguides as well as the width modulated mirror regions are designed using a single mask and are fabricated in a shallow trench process. The transmission spectra of these width modulated micro-cavities with different mirror reflectivities and cavity lengths are investigated. Q-factors up to 855 could be observed at 1550 nm wavelength with low insertion loss of 1.9 dB. The width modulated micro-cavities, including the mirror regions, have lengths of less than 20 microns and widths of maximum 450 nm. These small foot-print cavities act as band pass filters and can be used as resonators for laser or electro-optic modulation of light.
The analysis of intercultural misunderstandings constitutes an important core area of intercultural studies. They deal with documented special situations of intercultural contact where failure has already been refl ected during the respective interaction. However, intercultural practice also knows »hidden« misunderstandings which are not perceived as intercultural misunderstandings by the interactors but which in the end might lead to negative results as well. The present contribution discusses the possibilities of a heuristic approach to examining these hidden misunderstandings using the example of an application interview. In order to explain the cultural causes of a hidden misunderstanding, established terms like common knowledge, values and judgments as well as cognitive schemes are applied. Due to its high explanatory potential, Hofstede’s concept of »cultural dimensions« is highlighted in particular.
Atomic force microscopy (AFM) topographical studies and results of nanoindentation experiment for several palladium-carbon films (Pd-C film) deposited on various substrates and with varying palladium content are presented. Pd-C films were prepared by a physical vapor decomposition (PVD) process and next were modified by a chemical vapor decomposition (CVD) method to obtain carbonaceous porous structure with dispersed palladium nanograins and a variation in roughness.
The dependence of film topography on the kind of substrate such as Al2O3, Mo polycrystalline foil and fused silica was studied by AFM. Nanomechanical properties such as hardness and the reduced indentation modulus were determined by nanoindentation. A comparison of these values for films with different Pd content deposited on various substrates is presented.
Methylcellulose (MC) / SiO2 organic / inorganic hybrid materials have been prepared from MC and methyltriethoxysilane or ethyltrimethoxysilane, and characterized by XRD, FTIR and AFM. XRD showed peak shifts. FTIR shows intermolecular hydrogen bonding between MC and SiO2. AFM depicts surface roughness which depends on the silica precursor and MC content.
Prostate cancer (PCa) is the most common type of cancer found in men and among the leading causes of cancer death in the western world. In the present study, we compared the individual protein expression patterns from histologically characterized PCa and the surrounding benign tissue obtained by manual micro dissection using highly sensitive two-dimensional differential gel electrophoresis (2D-DIGE) coupled with mass spectrometry. Proteomic data revealed 118 protein spots to be differentially expressed in cancer (n = 24) compared to benign (n = 21) prostate tissue. These spots were analysed by MALDI-TOF-MS/MS and 79 different proteins were identified. Using principal component analysis we could clearly separate tumor and normal tissue and two distinct tumor groups based on the protein expression pattern. By using a systems biology approach, we could map many of these proteins both into major pathways involved in PCa progression as well as into a group of potential diagnostic and/or prognostic markers. Due to complexity of the highly interconnected shortest pathway network, the functional sub networks revealed some of the potential candidate biomarker proteins for further validation. By using a systems biology approach, our study revealed novel proteins and molecular networks with altered expression in PCa. Further functional validation of individual proteins is ongoing and might provide new insights in PCa progression potentially leading to the design of novel diagnostic and therapeutic strategies.
During cancer progression, specific genomic aberrations arise that can determine the scope of the disease and can be used as predictive or prognostic markers. The detection of specific gene amplifications or deletions in single blood-borne or disseminated tumour cells that may give rise to the development of metastases is of great clinical interest but technically challenging. In this study, we present a method for quantitative high-resolution genomic analysis of single cells. Cells were isolated under permanent microscopic control followed by high-fidelity whole genome amplification and subsequent analyses by fine tiling array-CGH and qPCR. The assay was applied to single breast cancer cells to analyze the chromosomal region centred by the therapeutical relevant EGFR gene. This method allows precise quantitative analysis of copy number variations in single cell diagnostics.
Currently established methods to identify viable and non-viable cells of cyanobacteria are either time-consuming (eg. plating) or preparation-intensive (eg. fluorescent staining). In this paper we present a new and fast viability assay for unicellular cyanobacteria, which uses red chlorophyll fluorescence and an unspecific green autofluorescence for the differentiation of viable and non-viable cells without the need of sample preparation.
For bioanalytical systems sensitivity and biomolecule activity are critical issues. The immobilization of proteins into multilayer systems by the layer-by-layer deposition has become one of the favorite methods with this respect. Moreover, the combination of nanoparticles with biomolecules on electrodes is a matter of particular interest since several examples with high activities and direct electron transfer have been found. Our study describes the investigation on silica nanoparticles and the redox protein cytochrome c for the construction of electro-active multilayer architectures, and the electron transfer within such systems. The novelty of this work is the construction of such artificial architectures with a non-conducting building block. Furthermore a detailed study of the size influence of silica nanoparticles is performed with regard to formation and electrochemical behavior of these systems.
An electrochemical sensor for p-aminophenyl phosphate (p APP) is reported. It is based on the electrochemical conversion of 4-aminophenol (4AP) at a quantum dot (QD) modified electrode under illumination. Without illumination no electron transfer and thus no oxidation of 4AP can occur. p APP as substrate is converted by the enzyme alkaline phosphatase (ALP) to generate 4AP as a product. The QDs are coupled via 1,4-benzenedithiol (BDT) linkage to the surface of a gold electrode and thus allow potential-controlled photocurrent generation. The photocurrent is modified by the enzyme reaction providing access to the substrate detection. In order to develop a photobioelectrochemical sensor the enzyme is immobilized on top of the photo-switchable layer of the QDs. Immobilization of ALP is required for the potential possibility of spatially resolved measurements. Geometries with immobilized ALP are compared versus having the ALP in solution. Data indicate that functional immobilization with layer-by-layer assembly is possible. Enzymatic activity of ALP and thus the photocurrent can be described by Michaelis- Menten kinetics. p APP is detected as proof of principle investigation within the range of 25 μM - 1 mM.