Energie und Mobilität
Refine
Year of publication
Document Type
- conference proceeding (article) (24)
- Article (8)
- Part of a Book (5)
Language
- English (37)
Is part of the Bibliography
- no (37)
Keywords
- permanent magnet synchronous machine (5)
- synchronous machines (5)
- Rotors (4)
- asynchronous machines (4)
- permanent magnet machines (4)
- stators (4)
- Cooling (3)
- dynamic load (3)
- induction machines (3)
- lumped element thermal equivalent circuit model (3)
- squirrel cage (3)
- temperature (3)
- temperature estimation (3)
- variable speed (3)
- Condition Monitoring (2)
- Elektroantrieb (2)
- Inverters (2)
- Magnetic Saturation (2)
- Modelica (2)
- Torque (2)
- computational fluid dynamics (2)
- consistent parameters (2)
- induction machine (2)
- invertors (2)
- multi phase (2)
- partial load efficiency (2)
- permanent magnet motors (2)
- AC Machine (1)
- Active Front-End (1)
- Airgap Eccentricity (1)
- CELL (1)
- CFD (1)
- Capacitors (1)
- Concentrated (1)
- Connectors (1)
- DC-link capacitor (1)
- Demagnetization (1)
- Diagnostics (1)
- Eccentricity (1)
- Electric Drive (1)
- Electric machines (1)
- Electric machines and drives (1)
- Electrical rotor asymmetries (1)
- Electrolysis (1)
- Field Oriented Control (1)
- Fluid flow (1)
- Glass Industry (1)
- Hydrogen (1)
- Induction Motor (1)
- Induction machines (1)
- Induction motor (1)
- Interleaving (1)
- Low voltage (1)
- Mathematical model (1)
- Model reduction (1)
- Modelica Standard Library (1)
- Modelica Standard Library MSL (1)
- Modeling (1)
- Motor Current Signature Analysis (MCSA) (1)
- Motor drives (1)
- NVH (1)
- Object oriented modeling (1)
- Optimization of Field Current (1)
- Oxyfuel (1)
- PWM Converter (1)
- Parameter identification (1)
- Parameter optimization (1)
- Permanent Magnet (PM) (1)
- Permanent Magnet Synchronous Motor (1)
- Photovoltaics (1)
- Power-to-Gas (1)
- Pulse width modulation (1)
- Rotating electrical three phase machines (1)
- Sensorless vector control (1)
- Simulation (1)
- Synchronmaschine (1)
- Synchronous Motor (SM) (1)
- Thermal Management (1)
- Thermal models (1)
- Vehicles (1)
- Voltage-Oriented Control (1)
- Wind power pants (1)
- Windings (1)
- air cooling (1)
- battery parameterization (1)
- broken rotor bar (1)
- carrier phase shift (1)
- control (1)
- converter (1)
- cooling (1)
- cooling concept (1)
- d-axis Inductance (1)
- data sheet (1)
- deep bar effect (1)
- demagnetization (1)
- dual 3-phase inverter (1)
- dual three phase system (1)
- e-axle (1)
- electric Machine models (1)
- electric sensing devices (1)
- electric vehicles (1)
- energy (1)
- equivalent circuits (1)
- fatigue limit (1)
- fault diagnosis (1)
- fault location (1)
- finite element analysis (1)
- flux barrier (1)
- fractional slot (1)
- functional mockup interface (1)
- fundamental wave (1)
- harmonic analysis (1)
- harmonics (1)
- iduction motor (1)
- inductance (1)
- inductance modeling (1)
- induction motor (1)
- integrated modular motor drive (1)
- interior magnet (1)
- irradiance (1)
- load (electric) (1)
- load impulses (1)
- machine design (1)
- machine testing (1)
- magnetic asymmetry (1)
- magnetic cores (1)
- magnetic fields (1)
- magnetic flux (1)
- magnetic levitation (1)
- magnetic potential difference (1)
- maximum power tracking (1)
- mechatronics (1)
- module (1)
- multi phase electric machines (1)
- nonlinear saturation effects (1)
- numerical analysis (1)
- permanent magnet (1)
- physical battery model (1)
- pitch control (1)
- plant (1)
- power (1)
- power electronics (1)
- power engineering computing (1)
- quasi static (1)
- reluctance (1)
- ripple current reduction (1)
- rotor asymmetries (1)
- rotor fault (1)
- segmentation (1)
- sensor placement (1)
- simplified battery model (1)
- simulation (1)
- simulation model (1)
- skewing (1)
- skin effect (1)
- slip ring (1)
- speed control (1)
- squirrel cage induction machine (1)
- statistical wind data (1)
- subharmonics (1)
- switching (1)
- synchronous machine (1)
- synchronous motor protection (1)
- synchronous motors (1)
- synchronous reluctance machine (1)
- temperature distribution (1)
- temperature sensors (1)
- terrestrial solar model (1)
- thermal analysis (1)
- thermal behavior (1)
- time transients (1)
- time-discrete control (1)
- traction drive system (1)
- transient (1)
- winding displacement (1)
- windings (1)
- wound field synchronous machine (1)
Institute
- Labor Elektrische Maschinen und Antriebstechnik (37) (remove)
Begutachtungsstatus
- peer-reviewed (23)
This paper presents a physical model of a squirrel cage induction machine with rotor topology. The machine is modeled in Modelica, an object oriented multi physical modeling system. The presented machine model is used to investigate electrical rotor asymmetries in induction machines. For the case of a single broken rotor bar a simulation model is compared with measurement results.
In this work a buck converter model for multidomain simulations is proposed and compared with a state-of-the-art buck converter model. In the proposed model no switching events are calculated. By avoiding the computation of the switching events in power electronic models the processing time of multidomain simulations can be decreased significantly. The proposed model calculates any operation point of the buck converter in continuous inductor current conduction mode (CICM) while considering the conduction losses and switching losses. It is possible to utilize the proposed modeling approach also for other dc-to-dc converter topologies. Laboratory test results for the validation of the proposed model are included.
From the rating plate data of an induction motor the nominal efficiency can be determined. Without detailed knowledge of equivalent circuit parameters, partial load behavior cannot be computed. Therefore, a combined calculation and estimation scheme is presented, where the consistent parameters of an equivalent circuit are elaborated, exactly matching the nominal operating point. From these parameters part load
efficiencies can be determined.
Sensorless PM-Drive Aspects
(2010)
The development procedure of permanent magnet drives for sensor less operation beginning from standstill under overload conditions has to consider different design aspects coevally. First, the robust rotor position sensing by test signal enforces a design with a strongly different behavior of the spatial dq-oriented differential inductance values. Therefore, the interior rotor magnet array arrangement is from principle predestinated for the controlled sensor less mode including standstill. Fortunately, in order to reduce costs, the distinct reluctance torque capability of such interior magnet arrangement is additionally used for a significantly increased torque by applying a pre-oriented stator current space vectors within the quasi-steady control.
For a totally enclosed fan-cooled induction machine, two methods of numerical analysis are compared with measurements. The first numerical method is based on computational fluid dynamics (CFDs) and the second one uses a thermal equivalent circuit (TEC). For the analysis based on CFD, a 3-D induction machine including housing is modeled. The numeric solution of the flow equations is determined for stationary temperature distributions. For the TEC, a discretized one-and-a-half-dimensional model of the induction machine is considered. With the TEC model, stationary and transient operating conditions can be simulated. Measurement results are determined by iron-copper-nickel sensors embedded in the stator winding and the housing, as well as by an IR sensor for measuring the rotor temperature. With these measurement signals, stationary and transient operating conditions can be analyzed. For stationary operating conditions, additionally, the housing temperatures are determined by an IR camera. The investigated simulation and measurement methods reveal different local and global temperatures, and thus, only certain aspects and characteristics of the obtained temperatures can be compared. Nevertheless, certain conclusions can be drawn from comparing these aspects considering the actual restrictions of each of the applied methods.
An electric traction machine for an electric or a hybrid electric vehicle is usually designed for a specific operating point or cycle. For such an operating point or cycle, the masses and the cooling circuit of the electric machine determine the time dependent temperature distribution within the machine. For a specific load cycle, the thermal simulation of the machine can reveal possible mass and size reductions for a given insulation class of the machine. In addition, such simulations allow the comparison of various cooling concepts. In the machine design process, the first step is a conventional electromagnetic machine design. From the geometric data of this design and the material properties, the parameters of a thermal equivalent circuit can be derived. The differential and algebraic equations of the thermal equivalent circuit are solved by a simulation tool to predict the temperatures of the critical parts in the electric machine. A thermal equivalent circuit is accurate enough to predict the thermal behavior of the critical parts in the electric machine, and yet not too complex, to obtain simulation results with moderate numerical effort. This enables an iterative design process to optimize the drive.
The paper presents a concept and an implementation of Modelica simulation interaction using the operating system inter-process communication method of the Named Pipe. The main aim of this presented work is to implement a hardware-in-the-loop simulation (HILS) environment based on Dymola which runs on a normal Microsoft Windows Personal Com-puter. An energy storage test bench is connected by an ana-logue and digital data input/output card with the Dymola simulation computer. With this proposed system, particularly long-time simulations with sample rates up to 30 Hz can be executed very cost effective. Typical applications are simulations of drive cycles to test energy storage systems in electrified vehicles such as batteries or fuel cells. Other application ex-amples are the verification of battery models, thermal management models or battery management sys-tem (BMS) models. In this paper all methods used for implementation are described in detail. Especially the concept of inter-process communication and the concept for real-time and simulation time synchronization is discused. An application example which uses the provided concept is also shown at in this paper. In this example a longitudinal simulation of a vehicle is pre-sented. The startup phase of the internal combusting engine model and a short drive cycle in combination with a connected real battery is shown.