Filtern
Dokumenttyp
Referierte Publikation
- nein (3)
Schlagworte
- Cold Spray (1)
- Copper powder particles (1)
- Durchstrahlungsverfahren (1)
- Electrical conductivity (1)
- Fügestellen (1)
- Gamma-Strahler (1)
- High rate tension test (1)
- Hochgeschwindigkeitszugversuch (1)
- Joints (1)
- Kennwerte für Crashsimulation (1)
Organisationseinheit der BAM
+ Der Schutz der Beschäftigen und der Öffentlichkeit und die sichere Handhabung von
umschlossenen Quellen in der technischen Radiographie ist durch die Beachtung aller Regeln
(Gesetze, Verordnungen und Standards) gewährleistet.
+ Nach derzeitigem Kenntnisstand sind die dargestellten Maßnahmen für die Gamma-
Radiographie aus Sicht der Anwender ausreichend.
+ Der Standort einer radioaktiven Quelle wird durch ihre Registrierung in das HRQ- Register
und bei der örtlichen Regulierungsbehörde sowie durch Anmeldung einer Vor-Ort-Gamma-
Radiographie bei der zuständigen Behörde nachvollziehbar.
+ Safety: Technische Sicherheit umschlossener radioaktiver Quellen ist gesichert durch
technische Maßnahmen.
+ Security: Öffentliche Sicherheit ist gewährleistet durch Genehmigungsverfahren, technische
24
Technische und öffentliche Sicherheit von umschlossenen radioaktiven
Quellen in der Werkstoffprüfung
Redmer et.al. DGZfP Jahrestagung 2010, Erfurt, 10.-12. Mai 2010
Regeln, Ausbildung und Training und einem entsprechenden Qualitätsmanagement.
+ Aus Sicht der nuklearen Gefahrenabwehr wird z.Z. über neue bzw. umfangreichere
Maßnahmen zur Sicherheit von umschlossenen Strahlenquellen nachgedacht. Erste Entwürfe
bei der IAEA und EU sind im Umlauf bzw. in Diskussion. Mittelfristig wird eine Änderung der
StrlSchV dazu erwartet.
In line with the industrial trend of additive manufacturing, cold spray as a non-laser-based process is becoming increasingly important for many fields of application. For the evaluation of additive manufacturing of winding components made of copper for large electrical high-voltage machines, material and component properties such as electrical conductivity, mechanical load capacity and the component size that can be produced are of particular importance. In this context, the cold spray process offers advantages over laser-based additive manufacturing processes such as laser powder bed fusion (LPBF) or laser cladding by using the kinetic energy of the copper powder particles to generate particle cohesion. To investigate the electrical conductivity as well as the mechanical load capacity of cold spray parts, specimens were machined out of cold sprayed bulk copper deposits. The characteristic values were obtained with regard to the direction of deposition, which is defined by the direction of the robot’s movement. Thus, for the investigation of the component properties, specimens were provided that had been produced both longitudinally and transversely as well as orthogonally to the direction of deposition. The results of the investigations show that both the electrical conductivity and the mechanical load capacity of the specimen have a strong preferential direction of the specimen orientation with respect to the direction of deposition. Furthermore, it could be shown that by increasing the deposition height, there is an increasing oxygen content in the sample material, combined with increasingly significant defect networks. These effects have a negative impact on the electrical conductivity as well as on the mechanical load capacity. As a conclusion, further need for investigation is identified in the optimization of the process parameters as well as in the deposition strategy for the additive manufacturing of large-volume components with cold spray.