Filtern
Dokumenttyp
- Zeitschriftenartikel (6)
- Vortrag (2)
- Buchkapitel (1)
- Beitrag zu einem Tagungsband (1)
- Dissertation (1)
- Posterpräsentation (1)
Schlagworte
- Flame retardancy (3)
- Flame retardance (2)
- WPC (2)
- Aluminum phosphinate (1)
- Aryl phosphate (1)
- BDP (1)
- Cone calorimeter (1)
- Decking boards (1)
- Decomposition (1)
- Degradation (1)
Eingeladener Vortrag
- nein (2)
Up to now only little knowledge has been recorded about the fire behavior and flame retardancy of wood-plastic composites (WPCs). The use of WPCs has increased continuously in recent years. Especially in their main field of application as a decking material, WPCs present a big share of the market. To date no flame-retarded solution has been introduced for WPC materials that fulfils the necessary requirements. But flameretarded materials are indispensable, especially for indoor use and the protection of escape routes. In this study basic knowledge about the fire behavior of WPCs is investigated first. Second, the effectiveness and mode of action of different flame-retardant additives is investigated. Special attention is drawn to products made of WPC material. Therefore WPC was further investigated in its main field of application as decking boards. The fire behavior of materials and products was investigated by means of cone calorimeter measurements as well as radiant panel tests. Furthermore numerical simulations were carried out to study the effects of various thermal material properties on burning behavior. Thermal decomposition was studied using thermogravimetric methods and spectroscopic investigations. Against this background, models for thermal decomposition pathways were built for combinations of WPC material with different flame retardants. WPCs show burning behavior similar to that of pure wood samples with an increased heat release rate due to polymeric fractions. It is shown that all investigated flame retardants had a positive effect on the burning behavior of WPCs. The best results were achieved by the flame retardants ammonium polyphosphate, Paxymer and expandable graphite. Especially in combination with red phosphorus, expandable graphite was highly effective because red phosphorus stabilized formed residue. Apart from the influence of flame retardants, other influencing factors like geometry and moisture content also played an important role concerning the flame retardancy of WPC decking boards. Indeed, hollow decking boards offer a reduced amount of combustible material, but their flame spread is increased in comparison to solid samples.
Glass fiber reinforced polyamide (PA) 6T/DT flame retarded with aluminum diethylphosphinate (AlPi) was tested to assess its flame retardant properties. Models for the decomposition of PA 6T/DT with and without AlPi are presented. Thermal decomposition was measured by performing TGA with Fourier transform infrared (FTIR) spectroscopy and FTIR spectroscopy in the condensed phase. Fire behavior was studied using a cone calorimeter and flammability was tested with UL 94 and the limiting oxygen index. AlPi works as an effective flame retardant for glass fiber reinforced PA 6T/DT materials, acting in the gas phase. Also observed was condensed-phase action, which occurs especially under oxidative conditions before the samples ignite.
A new flame retardant based on an ammonium phosphonate is studied with respect to its thermal decomposition and its mode of action in wood-plastic composites (WPCs). The measurements are carried out by means of fire tests (cone calorimeter) and pyrolysis investigations (thermogravimetry, infrared spectroscopy). The flame retardant acts mainly in the condensed phase by increasing the amount of residue formed by the wood part in the WPC. Additional flame dilution is achieved by the release of water, ammonia and carbon dioxide during the decomposition of the flame retardant.
In this study, we investigated the basic knowledge necessary to develop flame-retarded woodplastic composite (WPC) materials by focusing on decking boards. Therefore, the respective effects of geometry, material composition, and moisture were studied by performing cone calorimetric measurements. Using hollow-shaped geometries removes combustible material and reduces the fire load but simultaneously increases fire propagation. The best results were achieved by using high-wood contents. The addition of talc can reduce the intensity of burning. Moisture also has a positive effect on burning behavior. Apart from the well-known mechanism of water, a change was observed in the resultant residue.
The pyrolysis and flame retardancy of a bisphenol A polycarbonate/silicon rubber/bisphenol A bis(diphenyl phosphate) (PC/SiR/BDP) blend were investigated and compared to those of PC/BDP and PC/SiR. The impact modifier SiR consists mainly of poly(dimethylsiloxane) (PDMS > 80 wt %). The pyrolysis of PC/SiR/BDP was studied by thermogravimetry (TG), TG–FTIR to analyze the evolved gases, and a Linkam hot stage cell within FTIR as well as 29Si NMR and 31P NMR to analyze the solid residue. The fire performance was determined by PCFC, LOI, UL 94, and a cone calorimeter under different external irradiations. The fire residues were studied by using ATR-FTIR as well as the additional binary systems PC + PDMS, PC + BDP, and BDP + PDMS, focusing on the specific chemical interactions. The decomposition pathways are revealed, focusing on the competing interaction between the components. Fire retardancy in PC/SiR/BDP is caused by both flame inhibition in the gas phase and inorganic-carbonaceous residue formation in the condensed phase. The PC/SiR/BDP does not work as well superimposing the PC/SiR and PC/BDP performances. PDMS reacts with PC and BDP, decreasing BDP's mode of action. Nevertheless, the flammability (LOI > 37%, UL 94 V-0) of PC/SiR/BDP equals the high level of PC/BDP. Indeed, SiR in PC/SiR/BDP is underlined as a promising impact modifier in flame-retarded PC/impact modifier blends as an alternative to highly flammable impact modifiers such as acrylonitrile–butadiene–styrene (ABS), taking into account that the chosen SiR leads to PC blends with a similar mechanical performance.
Combinations of different common flame retardants in wood–plastic composites (WPCs) are tested to identify synergistic or antagonistic effects with the goal of improving the fire performance of WPCs. Flame retardants investigated are expandable graphite (EG), ammonium polyphosphate (APP), and red phosphorus (RP) and combinations of two of them are used. The fire behavior is studied by cone calorimetric measurements. Additional thermogravimetry is used for further investigations. The fire tests show that EG has the highest potential for flame retardancy, but due to its expansion it cracks the formed residue layer. Combinations of EG with RP or with high amounts of APP are able to suppress this cracking.
Flame retarded wood-plastic composites (WPCs) should allow safe application in areas of fire risk. Halogen-free flame retardants can contain high amounts of nitrogen, phosphorus or sulphur, which may serve as nutrition source for wood degrading fungi and accelerate wood decay. Therefore, the material resistance of WPCs with each of four flame retardants against both fire or fungal decay was examined in comparison to WPC without flame retardant. Expandable graphite showed the best performance against fire in cone calorimetry and radiant panel testing. Two ammonium polyphosphates and a third nitrogen-containing flame retardant were not as effective. Contrary to the possibility that flame retardants might enhance fungal decay of WPC, the opposite effect occurred in case of the wood-degrading fungi Trametes versicolor and Coniophora puteana according to determination of mass loss and decrease of bending modulus of elasticity. Only the surface mould Alternaria alternata slightly increased the degradation of WPCs with nitrogen-containing flame retardants compared to WPC without flame retardant according to mass loss data and FTIR-ATR analyses. Finally, WPC including expandable graphite as flame retardant was effective against both fire and fungal decay.
