FG Füge- und Schweißtechnik
Refine
Year of publication
- 2019 (1) (remove)
Document Type
Language
- English (1)
Keywords
- Laser metal deposition (1) (remove)
Institute
In the present work, laser beam build-up welding of AlSi12 alloy powder on AlSi1MgMn-alloy (EN AW-6082) substrate has been studied to determine the laser deposition strategy for fabrication of 3-D structure. First, the influence of laser power, scanning speed and powder feeding rate on the output parameters, such as clad geometry, dilution ratio, powder efficiency and porosity were analysed for deposition of a single track. Mathematical relationships were then established and the optimal parameters were identified by the desirability approach. Second, these optimal process parameters are furthermore adjusted to fabricate rectangular, cylindrical and complex combination volumes; different layer deposition strategies are used and evaluated. Finally, by using an adapted deposition strategy, one prototype consisted of different complexly shaped elements on one curved Al-alloy substrate without welding fusion defects was manufactured. The average tensile strength of deposited
samples with four different layer deposition directions (vertical 0°/90°; horizontal 0°/90°; horizontal 0° and horizontal 90°)
was measured, respectively, which are comparable strengths or higher than those of cast samples. The microstructure of the
laser-deposited material is investigated using optical microscopy and scanning electron microscopy as well as microcomputed
tomography. Microstructure and hardness of deposited multilayers exhibit inhomogeneous distributions, which vary with the deposit location