Refine
Document Type
Way of publication
- Open Access (1)
Language
- English (4)
Keywords
- 2D layered compounds (3)
- Chemical vapor transport (3)
- Crystal growth (3)
- Thermodynamic modeling (3)
- Crystal structure (2)
- Halides (2)
- Chalcogenides (1)
- Phase diagram (1)
Institute
The two-dimensional (2D) chromium trihalides CrCl3, CrBr3, and CrI3 are most famous for their exotic magnetic properties when their crystals get downscaled to nanometer dimensions. One way to tune the properties of such materials and to further increase their potential utility, e.g., in spintronics, is the formation of solid solutions. Here, we present a detailed theoretical and experimental study on the synthesis and nanoplatelet growth of CrBrxCl3–x and CrBrxI3–x solid solutions. Phase pure powder was obtained by tempering the respective parent compounds at 600 and 550 °C, using additional iodine in the case of CrBrxI3–x. The dominant stacking order changes at x = 1.8 for CrBrxCl3–x while remaining similar to CrI3 for the whole CrBrxI3–x series. A consecutive chemical vapor transport from 575 → 525 °C for 2 h (CrBrxCl3–x) or 600 → 550 °C for 3 h with 0.1 mmol additional iodine (CrBrxI3–x) resulted in the deposition of high-quality nanoplatelets on a substrate with only several nanometers in height. The composition can be controlled by the choice of the starting material, since only small shifts in the anion ratio occur during the transport. The deposited CrBrxCl3–x nanoplatelets can then be easily delaminated by ultrasonication in ethanol to reduce the height even further to few-layer dimensions. These nanoplatelets could potentially be used to investigate the property changes (e.g., in terms of magnetic response) for the downscaling of these solid solutions. We further demonstrate the quality of the deposited material by transmission electron microscopy, selected area electron diffraction, and X-ray photoelectron spectroscopy. Raman spectroscopy of the solid solution series reveals a complex evolution of vibrational modes. Photoluminescence measurements on solid solution samples show emission peaks in the near-infrared energy range with the specific energy and intensity being composition and temperature dependent.
In the search for novel 2D materials with potentially valuable properties, such as a tunable band gap for optoelectronic or catalytic applications, solid solutions hold the potential to significantly expand the inventory of available 2D nanomaterials. In this study, we present for the first time the synthesis of such 2D rhodium trihalide solid solutions: RhBrxCl3−x and RhBrxI3−x. We use thermodynamic simulations and simultaneous thermal analysis to predict conditions for their rational synthesis and to investigate suitable chemical vapor transport (CVT) parameters for these solid solutions. The evolution of the lattice parameters was investigated by powder x-ray diffraction, showing an isostructural relationship of the synthesized compounds and only minor deviation from Vegard's law. The optical band gap of these materials can be tuned in an energy range from 1.5 eV (RhCl3) to 1.2 eV (RhI3) by choosing the composition of the solid solution, while the samples also exhibit photoluminescence in similar energy ranges. Ultimately, the successful deposition of bulk as well as ultrathin 2D nanocrystals of RhBrxCl3−x by CVT from 925 °C to 850 °C is shown, where the composition of the deposited crystals is precisely controlled by the choice of the starting composition and the initial amount of material. The high quality of the obtained nanocrystals is confirmed by atomic force microscopy, high resolution transmission electron microscopy and selected area electron diffraction. For RhBrxI3−x, the CVT from 900 °C to 825 °C is more difficult and has only been practically demonstrated for an exemplary case. According to the observed properties, these novel solid solutions and nanocrystals show a great potential for an application in optoelectronic devices.
Tungsten telluride WTe2 is the sole candidate of a group of two-dimensional layered transition metal dichalcogenides (TMDCs) MX2 with a thermodynamically stable 1T′-structure at room temperature. The binary system W/Te was audited with respect to a rational approach of planning and realization of a bottom-up synthesis of WTe2 nanostructures. Thus, the parameters of the synthesis via chemical vapor transports (CVT) were derived by thermodynamic simulations of the reaction pathway according to the Calphad method. Reflecting on the peritectic melting behavior at 1020 °C, the values of ΔfHm° (298 K) = −26.5 kJ·mol−1 and Sm° (298 K) = 132 J·mol−1 ·K−1 have been obtained.
According to modeling, crystal growth by short time vapor transport is reasonable under the addition of bromine or TeBr4 in the temperature range between 650 and 750 °C. Experimental implementation of crystal growth of WTe2 nanosheets succeeded in a temperature gradient from 725 to 675 °C on yttria-stabilized zirconia (YSZ) (111) substrates, observing the deposition of single crystal sheets of high crystallinity with thicknesses of 15−20 nm (∼20−30 layers). The high crystallinity, pristine morphology, and overall quality of the deposited nanosheets is shown by means of atomic resolution transmission electron microscopy, selected area electron diffraction (SAED), and atomic force microscopy as well as profound double-polarized Raman spectroscopy.
Structural and Magnetic Transitions Caused by Dimer Formation in the CrCl3–MoCl3 Solid Solution
(2024)
In this work, we apply the concept of solid solutions to the two 2D transition metal trihalides CrCl3 and MoCl3. While CrCl3 belongs to the magnetically active CrX3 family, the magnetism in MoCl3 is intrinsically suppressed by the formation of aligned Mo–Mo
dimers, which also distort the regular honeycomb lattice that is typical for the 2D transition metal trihalides. We report suitable synthesis conditions for the gapless solid solution and crystal growth by chemical vapor transport. The CrCl3–MoCl3 solid solution was initially synthesized at 650 °C for 100 h under addition of MoCl5 as mineralizer, and bulk crystals were subsequently grown by vapor transport in a temperature gradient from
600 °C → 550 °C for 60 h. The obtained solid solution exhibits multiple composition-dependent phase transitions at room temperature, as confirmed by powder X-ray diffraction measurements. The possible presence of Mo–Mo dimers in the solid solution
was further investigated by infrared, Raman, electron energy loss, and nuclear quadrupole resonance spectroscopies. The combined results indicate that the Mo–Mo dimers are present over a wide range of compositions. Their orientation changes from parallel alignment for compositions from 70% ≤ c(Mo3+) ≤ 100% to random orientation for samples with c(Mo3+) < 70% content, which significantly affects the course of lattice parameters. Finally, the magnetic properties of the powder samples show a correlation between the Mo3+ content and the transition temperature into the low-temperature phase.